7Artisans DMIC-S Dual Channel Wireless Mic System Instruction Manual

DMIC-S Dual Channel Wireless Mic System
Instruction Manual

Charging case parameters and functions

1. Charging Case Indicator Charging Case Parameters***
   Appearance size:103.657.3*54mm| Weight: 153g
   ---|---
   Appearance material: ABS| Storage method: Magnetic flip cover
   Interface: Type-C charging interface| Battery capacity: 3000mAh/3.7V
   Battery type: LiPo 1S| Working time: causment Ste
   Charging time: about 4 hours| Working environment temperature: -10C-45C

When the charging case is opened:
(1) Power < 30%, red light flashing fast for 3 seconds and then goes out.
(2) 70% > power > 30%, red and green lights alternately flashing for 3 seconds and then goes out.
(3) 99% > power > 70%, green light flashes for 3 seconds and then goes out.
(4) Power 100%, green light on for 3 seconds and then goes out.
When the charging case is closed, equipment is charging
(1) Equipment charging state, charging case power health, red light is always on.
(2) Equipment charging state, charging case power below 30%, red light blinking.
(3) The device is fully charged, the indicator light goes out.

2. Type-C Charging Interface
   Type-c charging cable access
   (1) The charging box is charging, the red light blinking.
   (2) Charging case is fully charged, the green light is keeping on.
   (3) Unplug the charging cable, the light goes out.
   (4) When the device and the charging case are powered at the same time, when the power of the device is 100% and the power of the charging case is <100%, the red light is flashing; when the power of the device and the charging case is 100%, the green light is always on; when the charging power is cut off, the indicator light is off.

Transmitter parameters and function

Transmitter Parameters

an open outdoor environment without interference)
Interface type: 3.5mm interface Type-C interface| Pickup: omnidirectional pickup
Battery type: LiPo1S| SNR:>58dB
Working time: about 6~8 hours| Battery capacity: 250mAh/3.7V
Charging time: about 1.5 hour| Working environment temperature: -10°C-45°C

1. Microphone: This part is aligned with the mouth and is used for recording.

2. Power key: long press this key to turn on/off; short press this key to turn on/off the mute mode;double-click the key to turn on/off the Bluetooth accompaniment mode; Reset of the device with five consecutive quick keystrokes.

3. Mode switch key: each short press the key, cycle switch noise reduction / acoustic /reverb mode, default the noise reduction mode.

4. Power indicator: Power on and power enough, blue light is keeping on, less than 30% power red light blinking.

5. Mute indicator: microphone opening, blue light is keeping on, microphone off, blue light goes out.

6. Link indicator: automatic pairing of the receiver and transmitter after power on, pairing successfully, blue light is keeping on; pairing unsuccessfully, blue light blinking , long time pairing unsuccessful, fast five press the power button to restart the pairing.

7. Mode switching indicater: three color lights: blue indicates that the noise reduction function is on, red indicates that the reverb function is on, green indicates that the acoustic mode is on, each time the device is turned on, default for noise reduction mode.
   Noise reduction mode: suitable for short video recording and acoustic live, clear and clean vocals without reverberation.
   Reverb mode: suitable for live singing, with reverberation.
   Acoustic mode: suitable for short video recording and acoustic live, high life restoration without noise reduction.

8. Bluetooth indicator: Bluetooth is always on, Bluetooth pairing success, Bluetooth backing vocals function on; blue light off, Bluetooth backing vocals function off (Bluetooth as an external audio source accompaniment, can not be used as a recording, in addition, when use the backing vocals function, you need to use to another cell phone connected to Bluetooth as a backing audio source).

9. 3.5mm interface: connect 3.5 interface monitoring headphones.

10. Type-c interface: you can charge the device through the charging cable alone, you can also connect the type-c interface headphones to do monitor headphones to use.

11. Charging contact point: Connect to the charging case for charging.

Receiver functions and parameters

Receiver Parameters

Appearance size: 454519.5mm
Appearance material: ABS
Working frequency: 2400~2483.5MHz
Interface type: 3.5mm interface Type-C interface
Screen size: 0.96 inches
Battery capacity: 350mAh/3.7V
Working environment temperature: -10°C-45°C
Weight: 27g
Wireless mode: GFSK 1Mbps and 2Mbps
Communication distance: 100m (measured in an open outdoor environment without interference)
Screen type: TFT
Battery type: LiPo 1S
Working time: about 8~10 hours
Charging time: about 1.5 hour

1. Power key: long press this key to turn on/off, short press this key to turn on/off the power-saving mode; double-click the key to turn on/off the flash function; Reset of the device with five consecutive quick keystrokes.
2.  Volume key: each short press on the key, cycle switch five steps volume gain, each time the default volume of power on the four-step volume.
3. Device/Mode switching key: double-click the device/mode switching key to switch mono mode (M}/dual channel mode (S)/secure track mode (MS).
4. Device switch key + volume key: key combination function, first short press the device switch key, the corresponding device logo on the display will light up into blue (no subsequent operation after 5 seconds back to the initial state), indicating that the device is selected, and then double-click the volume key, you can control the corresponding device mute from the receiving end.
5. Power indicator: normal power on, power health, blue light is always on, less than 30% power, red light blinking.
6.  3.5mm interface: camera connection port, connected to the camera through the camera connection cable for recording / recording video operations.
7. Type-c interface: cell phone connection port, through the TYPE-C adapter cable or Apple adapter cable connected to the phone for live or recording/recording video operations.
8. Charging contact point: Connect to the charging case for charging.
9. Description of display:

A. The top area for the five function status, blue indicates that the function is on, gray indicates that the function is off. (BT – Bluetooth backing vocals DODGE – dodge function NC – noise reduction mode OST original sound mode REB – reverb mode).
B. The middle area for the two transmitter pickup state. (One-drag-one-mic only shows one transmitter)
C. The bottom area for the two transmitters and a receiver power status and signal status, when the No. 1 or No. 2 transmitter is selected for the background put the square will light up into red. (One-drag-one-mic only shows one transmitter)
D. When the device is set up, during the live broadcast, the display will automatically go out and enter the power-saving mode without operating any button within 2 minutes, if you need to wake up the screen, you can press any button to wake up at will.

Equipment operation methods

1. The operation methods of connecting to the phone recording, video or ve streamingThe first step: press and hold the receiver and transmitter on, and pair successfully (if pairing is unsuccessful, reset both transmitter and receiver with five consecutive keystrokes of the on/off button and pair again).
   The second step: the receiver connected to the phone with a mobile phone adapter cable (Android phones with type-C adapter cable, iPhones with Lightning adapter cable).
   The third step: set up the transmitter and receiver functions (Bluetooth companion singing function, dodge function, noise reduction acoustic or reverb function, etc.), open the corresponding APP in the phone that can be recording audio, recording video  or live streaming.

2. The operation methods of connecting the camera to record  audio/video.

Step 1: First press and hold the receiver and transmitter on and pair successfully (if pairing is unsuccessful, reset both transmitter and receiver with five consecutive keystrokes of the on/off button and pair again).
Step 2: Connect the receiver to the camera with the camera connection cable.
Step 3: Set up the corresponding functions of the transmitter and receiver (Bluetooth backing vocals function, dodge function, noise reduction acoustic or reverb function, etc.), open the camera that can be recorded, video recording and other operations.

Packing list

1. Charging case (one tows one without)
2. Transmitter x2 (one tows one transmitterX1)
3. Receiver
4. Instruction
5. Storage bag
6. Accessories (charging cable x1, Type-C adapter cable, lightning adapter cable, camera adapter cable)
7. Windproof cover x2(One drag one windproof cover X1)

Notes

1. Please disconnect the charger and turn off the machine before cleaning the machine.
2. Non-professionals please do not disassemble the equipment to avoid causing machine failure and loss of warranty rights.
3. Please do not place the equipment in the direct sunlight in the place to avoid early aging of electronic parts.
4. Avoid the use of dusty or dirty environment (dust can easily cause equipment failure)
5. Please do not place the equipment in too cold or too hot environment, will lead to the normal operation of the equipment.
6. It is recommended that the use of setting the ambient temperature does not exceed -10 °C -40 °C, relative humidity 10%-95%.
7. Do not put any objects into the equipment to avoid causing short circuit or circuit damage, do not splash any liquid onto the product.
8. Avoid the machine and hard objects friction impact, so as not to cause surface scratches,peeling or other hardware damage.
9. The product should not be exposed to sunlight, fire or similar overheating environment.
10. The manual contains important information, please keep it well.

Warranty

Coverage: replacement within one month, free repair within one year and limited repair within three years, subject to non-human damage.
Warranty card………………………………………..
Model NO…………………………………………
Date of purchase………………………………………..
Maintenance Records………………………………………..
Glent Nome………………………………………..
Contact number………………………………………..
Address………………………………………..

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>