Zhongshan Guangyun Lighting GY-SML-1200W Bluetooth Stereo Light Instructions
- June 5, 2024
- Zhongshan Guangyun Lighting
Table of Contents
Product Schematic
GY-SML-1200W Bluetooth Stereo Light
- Android Charging Port
- USB Charging Port
- Pilot Lighting
- Portable
- DC Charging Port
- Dimming Button
- Switch
- Solar Panels
- Light-Emitting Surface
- Speaker
Product Attribute:
| Lamp Luminous Flux(1m):1200LM | Input Voitage: SV |
|---|---|
| Solar Module Type:5V SW | Dimming Mode: Two gears of white light+Red and blue |
Flash
USB Interface: Dual USBSv Charging Ports| LED Chip: SMD5730
Irradiation Area:80-100square meters| itarrtioimirgaplo crtitrging ports (DC
port,
Working Time:8-10 hours| Playing Music Time:8-10H
Bluetooth Name: BT166| Material: ABS
Bluetooth Connection Method:
Turn on the power switch, turn on the Bluetooth of the mobile phone, search for the device BT166 to connect to the Bluetooth, and the music can be played after the connection is successful. (Note: When the power switch is turned on, there will be a tone indicating that the Bluetooth is turned on. When the phone is successfully connected, there will be a successful Bluetooth connection prompt. Bluetooth can only connect to one mobile phone at a time. If you want to connect to other mobile phones, you must disconnect the Bluetooth of the previously connected mobile phone. For other phones, just follow the prompts to search for connections.)
The Method of the Dimming:
Turn on the power switch and press the dimming button to adjust the lighting mode you want. (Note: The parameter of lighting time and music playback time are the lengths of time when used alone. When lighting and music work together, the white light will flash slightly.)
The Method of USB Charging Port:
Turn on the power switch and use the data cable to connect the phone to
charge. (Note: The USB charging port of this product comes with charging
protection. When the USB interface cannot be charged, unplug the data cable,
turn off the power switch and restart. If it still cannot be charged, please
wait a few minutes for the charging chip to release the charging protection.)
The Method of Android Charging Port and DC Charging Port:
The choice of charger for this product cannot exceed the parameters of the
charger equipped with this product. It needs to be charged with the charging
supplies provided with this product. (Note: It is not possible to charge the
product with two charging ports at the same time during charging.)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment