Select Blinds Eve Standalone Motorization Roller Shade User Guide
- June 6, 2024
- Select Blinds
Table of Contents
Select Blinds motors powered by Eve MotionBlinds
works with Apple Homekit technology.
setup guide
ROLLER SHADE
Buttons and functions
Install
Follow the steps in the installation instructions to install shade.
Activate
To activate the shade, connect it to a standard USB-C 5V power supply via a USB-C cable. This can be your iPhone’s power adapter, for example.
Download the Eve app
Download the Eve app from the App Store.
Setup the shade
Open the Eve app and tap Add Accessory. Eve will now guide you through the
setup process.
If you have previously set up an accessory, go to Settings and tap Add
Accessory.
The end positions of the shade, top, and bottom, are pre-programmed. These can
be adjusted by following the steps in the app.
Hide the HomeKit Setup Code
Slide the tassel up and rotate a quarter turn to hide the HomeKit Setup Code into the tassel.
Recharge the shade
To charge the blind, connect it to a standard USB-C 5V power supply via a
USB-C cable.
This can be your iPhone’s power adapter, for example.
LED light flashes red during operation; Charge the battery| LED light flashes green; battery is charging| LED light constantly green; the battery is fully charged
eve. MOTIONBLINDS
Documents / Resources
|
Select Blinds Eve Standalone Motorization Roller
Shade
[pdf] User Guide
Eve Standalone Motorization, Roller Shade, Eve Standalone Motorization Roller
Shade, Eve MotionBlinds works with Apple Homekit technology
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>