Shelly Pro 3 Din Mountable 3 Circuit Wi-Fi Smart Relay User Guide

Shelly Pro 3 Din Mountable 3 Circuit Wi-Fi Smart Relay

Product Information

Specifications

• Model: DIN Mountable 3-Circuit Wi-Fi Smart Relay
• Power Supply: 110-240V AC
• Wireless Connectivity: Wi-Fi
• Number of Circuits: 3
• Dimensions: [Insert Dimensions]

Product Introduction
The DIN Mountable 3-Circuit Wi-Fi Smart Relay is a versatile device that allows you to control your home appliances and lighting using your voice. With its Wi-Fi connectivity, you can conveniently manage and automate your home from anywhere using a compatible smartphone app.

Schematic
The device features the following connections:

• I1, I2, I3: Input terminals for connecting external switches or sensors
• O1, O2, O3: Output terminals for controlling appliances or lighting
• L1(A), L2(B), L3(C): Line connections for power supply
• LAN: Ethernet port for wired connectivity
• WI-FI: Indicator for Wi-Fi connectivity status
• POWER: Power input terminal
• RESET: Button for resetting the device
• S1, S2, S3: Status indicators
• L, N: Neutral and Line connections for power supply

Product Usage Instructions

Installation Instructions

CAUTION!
Danger of electrocution. Mounting/installation of the Device to the power grid has to be performed by a qualified electrician. Follow these steps to install the device:

1. Turn off the power supply to the installation area.
2. Remove the cover of the electrical junction box.
3. Mount the DIN Mountable 3-Circuit Wi-Fi Smart Relay securely inside the junction box using suitable screws.
4. Connect the power supply wires (L, N) to the corresponding terminals (L1, N) on the device.
5. Connect the load wires (OUT1, OUT2, OUT3) to the appliances or lighting that you want to control.
6. If using external switches or sensors, connect them to the input terminals (I1, I2, I3) on the device.
7. Replace the electrical junction box cover.
8. Turn on the power supply and ensure the device is properly functioning.

Initial Inclusion
To start using the DIN Mountable 3-Circuit Wi-Fi Smart Relay, follow these steps:

1. Ensure that your Wi-Fi network is operational and stable.
2. Download and install the compatible smartphone app from your device’s app store.
3. Create an account or log in to your existing account within the app.
4. Follow the app’s instructions to add a new device.
5. Put the device into pairing mode by pressing and holding the reset button for 5 seconds until the LED indicator starts flashing.
6. Within the app, select the device from the available list of devices and follow the on-screen instructions to complete the pairing process.

Troubleshooting
If you encounter any issues with the DIN Mountable 3-Circuit Wi-Fi Smart Relay, try the following troubleshooting steps:

1. Ensure that the device is properly connected to the power supply and that the power is turned on.
2. Check the Wi-Fi connectivity status and make sure your Wi-Fi network is functioning correctly.
3. Restart the device by pressing and holding the reset button for 10 seconds.
4. If the issue persists, refer to the user manual or contact customer support for further assistance.

FAQ

• Q: Can I control the DIN Mountable 3-Circuit Wi-Fi Smart Relay using voice commands?
  A: Yes, you can control the device using voice commands when connected to a compatible voice assistant like Amazon Alexa or Google Assistant.

• Q: Can I control multiple devices from the same smartphone app?
  A: Yes, the smartphone app allows you to control multiple DIN Mountable 3-Circuit Wi-Fi Smart Relays as long as they are connected to the same Wi-Fi network.

• Q: Is it possible to schedule automatic on/off timings for my appliances or lighting?
  A: Absolutely! The smartphone app provides scheduling features that allow you to set specific on/off timings for your connected devices.

Read before use
This document contains important technical and safety information about the device, its safety use, and installation.

CAUTION!
Before beginning the installation, please read this guide and any other documents accompanying the device carefully and completely. Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law, or refusal of legal and/or commercial guarantee (if any). Allterco Robotics EOOD is not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure to follow the user and safety instructions in this guide.

Product Introduction

Shelly® is a line of innovative microprocessor-managed devices, which allow remote control of electric circuits through a mobile phone, tablet, PC, or home automation system. Shelly® devices can work standalone in a local Wi-Fi network or they can also be operated through cloud home automation services. Shelly Cloud is a service that can be accessed using either Android or iOS mobile application, or with any internet browser at https://home.shelly.cloud/. Shelly® devices can be accessed, controlled, and monitored remotely from any place where the User has internet connectivity, as long as the devices are connected to a Wi-Fi router and the Internet. Shelly® devices have embedded Web Interface accessible at http://192.168.33.1 when connected directly to the device access point, or at the device IP address on the local Wi-Fi network. The embedded Web Interface can be used to monitor and control the device, as well as adjust its settings.

Shelly® devices can communicate directly with other Wi-Fi devices through HTTP protocol. An API is provided by Allterco Robotics EOOD. For more information, please visit https://shelly-api-docs.shelly.cloud/#shelly-family-overview. Shelly® devices are delivered with factory-installed firmware. If firmware updates are necessary to keep the devices in conformity, including security updates, Allterco Robotics EOOD will provide the updates free of charge through the device-embedded Web Interface or Shelly Mobile Application, where the information about the current firmware version is available. The choice to install or not the device firmware updates is the user’s sole responsibility. Allterco Robotics EOOD shall not be liable for any lack of conformity of the device caused by the failure of the user to install the provided updates promptly.

Control your home with your voice

Shelly® devices are compatible with Amazon Alexa and Google Home-supported functionalities. Please see our step-by-step guide at: https://shelly.cloud/support/compatibility/.

Shelly Pro Series

Shelly® Pro series is a line of devices suitable for homes, offices, retail stores, manufacturing facilities, and other buildings. Shelly® Pro devices are DIN mountable inside the breaker box, and highly suitable for new building construction. All Shelly® Pro devices can be controlled and monitored through Wi-Fi and LAN connections. Bluetooth connection can be used for the inclusion process. Shelly Pro 3 (the Device) is a DIN rail mountable 3-circuit smart relay. Enhanced with second-generation firmware flexibility and LAN connectivity, it provides professional integrators with much more options for end-customer solutions.

Schematic

Legend

Device terminals:

• O1, O2, O3: Load output terminals
• I1, I2, I3: Load input terminals
• SW1, SW2, SW3: Switch input terminals controlling O1, O2 and O3
• L: Live (110-240 VAC) terminals
• N: Neutral terminal
• LAN: Local Area Network RJ 45 connector

Cables:

• N: Neutral cable
• L1(A): Load circuit 1 live (110-240 VAC) cable
• L2(B): Load circuit 2 live (110-240 VAC) cable
• L3(C): Load circuit 3 live (110-240 VAC) cable

Installation Instructions

• CAUTION! Danger of electrocution. Mounting/installation of the Device to the power grid has to be performed with caution, by a qualified electrician.

• CAUTION! Danger of electrocution. Every change in the connections has to be done after ensuring there is no voltage present at the Device terminals.

• CAUTION! Use the Device only with a power grid and appliances that comply with all applicable regulations. A short circuit in the power grid or any appliance connected to the Device may damage the Device.

• CAUTION! Do not connect the Device to appliances exceeding the given max load!

• CAUTION! Connect the Device only in the way shown in these instructions. Any other method could cause damage and/or injury.

• CAUTION! Do not install the device at a place where it is possible to get wet.

• RECOMMENDATION Connect the Device using solid single-core cables with increased insulation heat resistance not less than PVC T105°C.

  • Before starting installing/mounting the Device, wire check that the breakers are turned off and there is no voltage on their terminals. This can be done with a phase meter or multimeter. When you are sure that there is no
    voltage, you can proceed to connect the cables.

  • Connect the I1, I2, and I3 input terminals to the corresponding circuit breakers as shown in Fig.1.

  • Connect the three load circuits to the O1, O2, and O3 output terminals and the Negative cable.

  • Three different phases can be used for the three load circuits.

  • Connect the N terminal to the Negative cable.

  • Connect the L terminal to the Device power supply circuit breaker. Any of the three phases can be used to power the Device.

  • Connect three switches/buttons to the SW1, SW2, and SW3 terminals and the Device power supply circuit breaker.

  • Any combination of AC and DC circuits can be switched as long as the currents through the Device relays do not exceed 16 A and the voltages at their contacts are not higher than 240 VAC or 30 VDC.

• RECOMMENDATION: For inductive appliances that cause voltage spikes during switching on/off, such as electrical motors, fans, vacuum cleaners, and similar ones, RC snubber (0.1μF / 100 Ω / 1/2 W / 600 VAC) should be connected parallel to the appliance. The RC snubber can be purchased at https://shop.shelly.cloud/rc-snubber-wifi-smart-home-automation.

Initial Inclusion
If you choose to use the Device with the Shelly Cloud mobile application and Shelly Cloud service, instructions on how to connect the Device to the Cloud and control it through the Shelly App can be found in the “App Guide”. The Shelly Mobile Application and Shelly Cloud service are not conditions for the Device to function properly. This Device can be used stand-alone or with various other home automation platforms and protocols.

CAUTION!
Do not allow children to play with the buttons/switches connected to the Device. Keep the Devices for remote control of Shelly (mobile phones, tablets, PCs) away from children.

LED indication

• Power (red): A red light indicator will be on if the power supply is connected.
• Wi-Fi (varies):
  • The blue light indicator will be on if in AP mode.
  • The red light indicator will be on if in STA mode and not connected to a Wi-Fi network.
  • The yellow light indicator will be on if in STA mode and connected to a Wi-Fi network. Not connected to Shelly Cloud or Shelly Cloud disabled.
  • The green light indicator will be on if in STA mode and connected to a Wi-Fi network and to the Shelly Cloud.
  • The light indicator will be flashing Red/Blue if OTA update is in progress.
• LAN (green): A green light indicator will be on if LAN is connected.
• Out 1 (red): The red light indicator will be on if the Output 1 relay is closed.
• Out 2 (red): The red light indicator will be on if the Output 2 relay is closed.
• Out 3 (red): The red light indicator will be on if the Output 3 relay is closed.

Reset button

• Press and hold for 5 sec for AP mode.
• Press and hold for 10 sec for a factory reset.

Troubleshooting

In case you encounter problems with the installation or operation of Shelly® Pro 3, please check its knowledge base page: www.shelly.cloud/knowledge- base/devices/shelly-pro3/.

Specification

• Mounting: DIN rail
• Dimensions (HxWxL): 59x53x96 mm
• Working temperature: -20°C – 40°C
• Power supply: 110 – 240 VAC, 50/60Hz
• Electrical consumption: < 3 W
• Max switching voltage: 240 VAC / 30 VDC
• Max switching current per channel: 16 A
• Max total current through all channels: 48 A
• Max RF output power: 20 dBm
• Radio protocol: Wi-Fi 802.11 b/g/n
• Wi-Fi frequency: 2412 – 2472 МHz (Max. 2483 MHz)
• Operational range (depending on local construction):
  • up to 50 m outdoors,
  • up to 30 m indoors
• Bluetooth: v.4.2
• Bluetooth modulation: GFSK, π/4-DQPSK, 8-DPSK
• Bluetooth frequency TX/RX – 2402 – 2480MHz
• LAN: Yes
• Dry contacts: Yes
• Power metering: No
• Overpower protection: No
• Overcurrent protection: No
• Overvoltage protection: No
• Overtemperature Protection: Yes
• Scripting (mjs): Yes
• MQTT: YES
• Webhooks (URL actions): 20 with 5 URLs per hook
• Schedules: 20
• CPU: ESP32
• Flash: 8 MB

Declaration of conformity

Hereby, Allterco Robotics EOOD declares that the radio equipment type Shelly Pro 3 complies with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address https://shelly.cloud/knowledge-base/devices /shelly-pro-3/.

• Manufacturer: Allterco Robotics EOOD
• Address: Bulgaria, Sofia, 1407, 103 Cherni vrah Blvd.
• Tel.: +359 2 988 7435
• E-mail: support@shelly.cloud
• Web: https://www.shelly.cloud.

Changes in the contact data are published by the Manufacturer at the official website: https://www.shelly.cloud All rights to trademark Shelly® and other intellectual rights associated with this Device belong to Allterco Robotics EOOD.

References

• Shelly Home
• Welcome to Shelly Technical Documentation | Shelly Technical Documentation
• Shelly Pro 3
• Easy Smart Home Automation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>