XPOtool 62316 Workshop Tool Cart with 3 Trays User Manual
- June 9, 2024
- XPOtool
Table of Contents
XPOtool 62316 Workshop Tool Cart with 3 Trays
Introduction
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved.
Wil Tec Wild anger Technik GmbH cannot be held liable for any possible
mistakes in this operating manual, nor in the diagrams and illustrations
shown.
Although Wil Tec Wild anger Technik GmbH has made every possible effort to
ensure that this operating manual is complete, accurate, and up-to-date,
errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward
to hearing from you. Send us an e-mail to:
[email protected]
or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop:
https://www.wiltec.de/docsearch
Our postal address is
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: [email protected]
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
Thank you for choosing to purchase this quality product. To minimize the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
Safety instructions
- Only use the cart properly. Using the cart improperly increases the danger of injuries.
- Do not use the cart in case it is damaged.
- Do not exceed the maximum capacity (50 kg per tray, 150 kg in total).
- Do not climb or stand on the cart.
- Keep children away from the cart.
- Only place the cart onto a solid surface to avoid that it tips over.
- When parking the cart, make sure that its brakes are applied to avoid that it rolls away accidentally.
- Do not modify the cart in any way.
- Only use original spare parts.
Assembly
- Fix the rolls to the base plate with the help of the screws and washers. Make sure that the rolls provided with brakes are fixed to the front part of the cart and the rolls without brakes to the rear part.
- Attach the outer sides of the cart to the base plate.
- Fix the other drawers to their appropriate spots.
- At last, fix the handle to the right outer side.
Exploded view and parts list
№
| Name| Qty.
---|---|---
1| Screw (M8×15)|
2
2
| Screw (M8×12)| 24
3| Right outer side|
1
4
| Handle| 1
5| Base plate|
1
6
| Drawer| 2
7| Left outer side|
1
8
| Screw (M8×14)| 16
9| Nut (M6)|
40
10
| Castors| 2
11| Fix rolls|
2
Important Note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH
https://www.XPOtool.com
The Tool Experts
Documents / Resources
|
XPOtool 62316 Workshop Tool Cart with 3
Trays
[pdf] User Manual
62316 Workshop Tool Cart with 3 Trays, 62316, Workshop Tool Cart with 3 Trays,
Workshop Tool Cart, Tool Cart, Cart
---|---