MAXFREE F2 Triple Screen Laptop Screen Extender User Guide
- June 15, 2024
- MAXFREE
Table of Contents
F2 Triple Screen Laptop Screen Extender
User Guide
F2 Triple Screen Laptop Screen Extender
Pay attention to the switching sequence of the screen
- Ensure that all connected cables are secure and not loose before usage.
- The continuous power required for this product is 10W. Please confirm that the Type-C or
Type-A port of the laptop can withstand 10W (5V/2A], if not, the brightness of the product will be reduced to maintain the function.
Product Contents
Carefully check package contents, if anything is missing or damaged, please contact Murfree customer service for support: [email protected]
Product Specifications
Product Model:| F2| Product Weight:| 2.62 KG| Product
Size:| 389.5x248x28MM
---|---|---|---|---|---
Resolution:| 1920*1080P| Panel Type:| IPS| Louds Peaker:| 2 PCS
TYPE-C Input:| 5-20V/5A| TYPE-C Output:| 5-20V/4.25A| Refresh Rate:| 60Hz
Quick Guide
04owcaldetermine if my laptop prtis full. featured Type-Cprt?
Al Check our lat0.0/$.8¢p0th.so 0l le loll4wig00bl4lo hub0l Th.derbolt4 0Pt24fidoes the it is a flt-featured Type-C port 4tetht4.ti$.Lt4$lei4et it.8i ti00.at¥ A3 Check 1he0r 0a0 0/00 00pr /or i0a8iO
A1: lf you are using a Type-C cable as video output: (1) Your computer's Type-C port does not support video output, you can use an HDMI cable to connect to the screen to provide video signal output. (2) Your computer's Type-C port supports video output, but the output voltage of the Type-C port is not enough, or the laptop is not enough power, you need to connect an external power supply to the screen. A2: If you use HDMI as video output, please connect an external 5V/2A power supply to power the screen.
Q3: Why doesn't the screen light up when I connect it?
A1: Please make sure the data cable is properly connected to F2. A2: lf you are connecting the product with an HDMI cable, please connect an external 5V/2A power supply to power the screen. A3: Please make sure the computer interface supports video output. A4: The product is turned off, please press and hold the product on/off button for three seconds to turn on the product.
Warm Tips
How to plug and unplug the Type-C cable correctly:
You need to pinch the head of the Type-C cable to plug and unplug the cable as
shown in the picture, otherwise, the cable will be damaged.
Installation and Storage
-
Method of Unfolding Open the supports on both sides Supports 360° rotation in horizontal/vertical direction
Remove the left and right screens in order Adjust the base size to fit the laptop
Note: The maximum stretching length of the base is 400mm -
Installing the Screen
Step 1 Align the card slot of the screen with the buckle in the shaft, and press it in the direction shown in the figure
Step 2: Press the screen in the direction shown in the figure until the screen snaps into place https://youtu.be/dnrjJnHni40 -
Various Applications of Dual Screens
-
Connect F2 with Laptop
Before connecting the F2 to your laptop, please make sure your laptop meets the following conditions:
1. The Type-C port provides 5V/2A power. (If not, use an external power source when connecting the monitor.)
2. A full-featured Type-C port.
3. An HDMI port is available.
Scenario 1: If your laptop has
two full-featured Type-C ports, use two Type-C cables to connect the F2
monitor to your laptop.
Scenario 2: If your laptop has only one full-
featured Type-C port, please refer to the following steps:
1. Use a Type-C cable to connect the first screen of the F2 monitor to your laptop’s full-featured Type-C port.
2. Use an HDMI to MINI HDMI cable and a Type-C cable to connect the second screen of the F2 monitor to your laptop.
Scenario 3: If your laptop does not have a full-featured Type-C
port, you can use a docking station with two HDMI and two Type-C ports.
Connect the F2 monitor using HDMI and Type-C cables to the docking station’s
respective HDMI and Type-C ports. Note: The docking station must support MST
(Multi-Stream Transport) functionality. -
Connect F2 with Mobile Phone
-
Connect F2 with Other Devices
Connect the F2 to the desk-top computer host, switch, mini PC, or set-top box [the screen needs an external power supply]
-
Disassemble the Screen
Step 1: Push up the screen in the direction shown in the figure
Step 2: Pull the screen out from the buckle of the hinge according to the direction shown in the figure -
Storage of the F2
Press the screen until you hear a click
Install the left screen into the bottom storage box of the bracket as shown in the figure
Note: Install into the bottom storage box of the bracket when storing
- Rotate the support rod clockwise 90 degrees in a horizontal direction for storage
- Be careful not to scratch the screen when rotating the spindle supporting the screen
Note: Pay attention to the storage order of the left screen and the right
screen to avoid damaging the screen. 
Audio Settings
-
Switch settings of Windows 10 /Windows 11 computer end output
1.1 Right click the loudspeaker icon down-right
1.2 Select “switch on sound” in pop-up dialog box
1.3 Left click “turn on sound settings” and pop-up the box as provided, Here users can set about sound;
Here users can set about sound
1. Master volume;
2. Select output device: (F2-R/speaker);
3. Device attributes.
Sound
output Some apps can be set to use a different sound device than the one selected here. Please customize the app volume and device in advanced sound selection.
-
Settings of MACOS Computer End Sound
2.1. Switch settings of MAC computer end sound output
2.2. Click computer’s “settings” APP 2.3. Select “sound” in dialog box and pop-up as provided:
Click “output”, users can do settings about sound;
Select output device: I F2 /speaker)
Display Settings for Windows 10/Windows 11/MacOS
-
Windows 10 / Windows 11 Display Settings
1.1 Right-click a blank area of the desktop. Select ‘Display Settings’ from the pop-up dialogue box.
Left-click “Display Settings” to open the settings dialogue box, as shown.
1.2 Under the “Rearrange displays”
section, drag and drop each display to rearrange them according to their
physical layout on your desktop. Scroll down to the bottom of the page to
further configure the display for extended or mirrored mode.
NOTE: When installing vertically, the display direction needs to be rotated [right screen 270 degrees, left screen 90 degrees) in the computer display settings.
Display Settings for Windows 10/Windows 11/Mac0S -
Mac0s 13 Ventura Display Settings
2.1 Enter the System Preferences” menu
2.2 Configure your monitor
In this menu, you can set the resolution and mirror/expand the display you want. 2.3Arrange Displays
To rearrange displays, drag them to the desired position.
To mirror displays, hold Option key while dragging them on top of each other.
To relocate the menu bar, drag it to a different display.
Note: When installing vertically, the display direction needs to be rotated [right screen vertical flip, left screen vertical} in the computer display settings.
0SD Settings
- Button Operation Guide
Classification| Key Function| Remark
---|---|---
Before entering the menu| Click to enter the menu interface| /
Press and hold for 3 seconds to turn off the screen| /
Toggle up to increase volume| “+”
Scroll down to decrease the volume| ,. _
After entering the menu| Click to enter the corresponding column| Confirm
Long press for 2 seconds to exit the selected screen| Return
Scroll up/down to select the corresponding column| Choose - Transportation, Storage and Use Requirements
To ensure the long-term use of this product and prevent accidental occurrences such as an electric shock, fire, etc .. , please read all usage requirements and operating procedures before using this product and comply with the following requirements:
1. Please use the original cable.
2. Remove the protective film on the surface of the screens before use.
3. The power input required by this product is 5V-20V +/-2V,and it required sustained operating power is >10W.(If the power supply provided by the laptops is not within this range, please use an external power supply.] 4. Avoid excessive humidity and dust build -up to avoid any sort of failure, causing circuit corrosion.
5. Do not squeeze or apply exceeding force to the surface of the screens.
6. Avoid using sharp objects on the screen surface.
7. This product is suitable for general commercial and household use in an optimal temperature environment between -20°Cand 60°C.
8. Disconnect any power cables when the device is not in use.
9. The maximum folding angle of the F2 is 360 degrees. When at the maximum angle, the screen should not be further bent or squeezed to avoid damage.
www.maxfreeofficial.com
The manufacturer reserves the right to make changes to the product and update
this manual at any time.
Any question, please contact:
[email protected]