Haier HWM65-306ES5 Washing Machine User Manual

WASHING MACHINE
USER MANUAL
HWM65-826 Series / HWM70-826 Series/
HWM65-707 Series / HWM70-789 Series/
HWM65-698 Series / HWM70-708 Series/
HWM70-707 Series / HWM60-707 Series/
HWM70-698 Series / HWM65-306 Series/
HWM70-306 Series/ HWM60-707E Series/
HWM65-707E Series / HWM70-707E Series/
HWM60-AE/FE Series/ HWM70-AE/FE Series/
HWM70-1269DB Series / HWM60-1269DB Series/
HWM65-12 69DB Series / HWM62/65-AE/FE Series/

• Please read this manual carefully before using washing machine.
• Retain it for future reference.

BRAND INTRODUCTION
Haier Group — Established in 1984, Haier Group is a world-leading provider of solutions to beautifullife. Haier has topped Euromonitor’s World Home Appliance Brands and its subsidiary Haier Smart Home Co.,Ltd. is among the Fortune Global 500 Companies.
Thank you for purchasing Haier product.

NAME OF PARTS

Notes: All illustrations in this manual are given for reference only. Your products and accessories may show differences from these illustrations due to our continuous improvement.

MEANING AND DESCRIPTION OF THE SYMBOLS

Warning sign| Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or endanger the personal safety of the user.
---|---
Forbidding sign| Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or endanger the personal safety of the user.

• Please check if the power receptacle has good earthing condition before using to guarantee your safety.

Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children.
This appliance Is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.| Do not decompose, repair or alter the machine by yourself.
---|---
Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine.| Do not wash laundries with volatile materials (such as thinner, petrol etc.)
The children shall not approach the working washing machine.| Keep the machine away from direct sunlight and heat source like the heater.

The lint filter shall be kept in good condition, and installed to proper position. If the lint filter is lost or damaged, please contact the local after-sales service department of our company.

Please plug in the power cord on special receptacle with rated voltage.Be sure to use single-phase three pins receptacle. The earthing terminal of the receptacle must be earthed reliably. {f nossible.olease adoot electric leakage protector.| The washing machine must be positioned so that ‘ the plug is accessible. Be sure to pull the plug off and close the water faucet in following cases: power failure, delivering the machine, setting the machine idle or cleaning the machine.
---|---
●  Donot plug in or pull out the power plug with wet hand.
● Donot bend ,extend, twist, bind by force. Do not press or nip it with weight.
● Keep the pin of the power plug clean, if the power plug is polluted with dust, please wipe with dry cloth carefully.
● If the supply cord is damaged, it must be replaced by the manufacturer or its  service aaent or a similarly qualified person in order to avoid a hazard.

• Motor used in machine is having Thermal Overload protection. So, in case of excessive heating, motor might trip and stop for cooling. In such case, it is suggested to wait till the temperature goes down before starting.

In case the washing machine is installed on ground with carpet, do not block the ventilation hole with carpet. Ensure carpet does not obstruct the opening in the bases.| Do not use water hotter than 50 °C.
---|---
Do not put the machine at damp place like the bathroom. Never wash it with water. Do not put wet laundries on the control panel.| Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations in spinning. Wash the clothes that can float on the water surface easily, please be careful especially, for fear damage.
Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacles loose, do not use the plug any more.

INSTALLATION AND ADJUSTMENT

Please install and adjust the machine according to the requirement of the manual.
It is very important for your safety and for operating the machine correctly
Install the bottom plate

1. Place the washing machine on the soft laying cloth, the face is towards the upper.
2. Insert the bottom cover into the slots of the bottom cover, and then lock in the fitment area
3. Install the washing machine on a solid, flat floor whitout using stand.

If the floor is uneven, adjust the adjustable feet of the washing machine to level position.
Uplift the feet slightly and turn the feet to level position

• The distance between the washing machine and wail: at least 20 mm. Max. tilt angle on the supporting face 2°.
  Adjust the installation position’

USAGE OF DRAINHOSE
The drainage shall be smooth with the drain hose.

1. The drain hose should be installed at height less  than 10cm for smooth drainage.
2. Do not trample or press the drain hose
3. If the drain hose is too long, cut it at mid point. To make smooth drainage,cut the front end of the hose slantingly. But the hook of drain pipe can not be installed again.
4. |f extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m. –
5. If the extra hose is too long,cut it either at Aor at B point.

Note: The instructions for appliances connected to the water mains by detachable hose-sets shall state that the new hose-sets sup plied with the appliance are to be used and that old hose-sets should not be reused.

Confirm the water faucet
The new hose-sets suppiied with the appliance are to be used and that old hose-sets should not be reused
It is required that the front end shall be longer than 10mm.
The exit end face of the faucet shall be flat and smooth.!f not please file it to avoid leakage.

Connection between the water inlet hose jointer and the water faucet

1. Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer from the water inlet hose component. See to Figure 1.
2. Take off the nameplate. Make sure the threading is 4mm above the upper surface of the nut.See to Figure 6.If the threading is less than 4mm above the upper surface of the nut.please loosen the screws.
3. Loosen the screw till the water faucet can be accessed. Put the jointer of the water inlet hose on the faucet. See to Figure 2. (If the faucet is too large and the jointer can not be set on the waiter faucet, please loosen the four screws and take out the bushing in the jointer. The front end of the faucet must be smooth, otherwise it may leak water. See to Figure 3.)
4. Fasten the four screws evenly. See to Figure 4.
5. Twist the fastening nut,See to Figure 5.Afrer installation, the threading is less than 2mm above the upper surface of the nut.See to Figure 6.

Connection between the water inlet hose and the washer

1. Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately.
2. Put the nut of the water inlet hose on the valve jointer.
3. Fasten the nut. Swing it gently to confirm if it’s suitable.

Connection between the jointer of the water inlet hose and the water inlet hose

1. Push down the slider. Insert the water inlet hose into the jointer.
2. Hang the lock lever to the jointer. Release the slider till a click sound is heard

1. Swing the hose gently to confirm if it is fastened stable.
2. After installation, open the faucet to check if it leaks.
3. Do not bend the hose with overstrain.
4. Before each usage please check if the connection between the jointer of the water inlet hose and the water faucer, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position.

Dismantle the water inlet hose

1. Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull off the water inlet hose. If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw.

PREPARATION BEFORE WASHING

Preparation before washing

1. Connect the water inlet hose. Open the water faucet.

2. Confirm that the washing machine is earthed reliably.
   Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline.

3. Put down the drain hose.

WOOL WASH

• Water Temp. should be below 30 degrees to avoid possible damages on clothes. ,
• When the working cycle is finished, plz take out Cloth and dry it to avoid retention & deformation. ,
• Appropriative wool detergent is suggested to acheive less damage & better washing ef fect.
• Clothes in white, black or other bright colors must be washed separately

Check if the laundries has any special requirement for washing. (fabric should be marked machine wash)| Clear the pocket. Take out the coins, keys hairpins etc.| Tie the long strips; fasten the buttons; close zippers.| The quantity of the laundries shall not be too large. Stretch and loosen the laundries before putting them in the tub. | When the pulsator is running, the buttons of the laundries may cause noise. For the sake of discretion, please wash the laundries with buttons separately (along with laundry washing bag).
---|---|---|---|---
a. Check if the laundries are applicable for washing in machine.
b. Divide the laundries that are not colorfast from other laundries.
C. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. for the parts with heavy soil, please apply detergent on them in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in machine.
f. Do not put the laundries polluted by chemicals into the washing machine

THE MUST IN WASHING

• The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity.
• The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and the laundries can be turned round in washing.
• Do not select the high water level for laundries less than 1.0kg ,so as to avoid splashing of water.

USAGE OF DETERGENT

• Itis suggested to add washing powder into the tub directly under fuzzy program and reserve program.

• Dissolve directly inside the washing machine: (not applicable for fuzzy and reserve program)
  1.Add some water(select “ 1″ water level).
  2.Add washing powder. Run for about 30s to fully dissolve the Powder. Then push the “ Start/Pause ” button.
  3.Put in laundries. Select suitable water level. Push the ” Start/Pause” button again.

• Washing powder with poor quality or long-time storage may get caked. Please clean the detergent box duly in usage.

• Quick dissolving of washing powder:
  1.Prepare warm water of 30°C and container.
  2. Add washing powder while stirring to dissolve it completely.

• Please add suitable washing powder as per the laundries quantity, the set water level and water quantity.

• If you select “ Quick” program, it is suggested to use liquid detergent instead of washing powder to guarantee the washing effect.

• It is not recommended to use rich-foam washing powder.

How to use liquid detergents
Close the lid
If you open the lid during spin cycle the machine will stop and audible alarm will sound.
Put the liquid detergent box on the right of the detergent box. See the above figure.
Before washing put the liquid into the detergents box directly as indicated the above figure. The usage and dose of the liquid detergent as per the specifications of liquid detergent.
Washing powder with poor quality or long-time storage may get caked . Please clean the detergents box duly in usage.

USAGE OF OPERATION BUTTONS

Explanation of Buttons (Applicable for 707/708 Series & 306S8Series)
*Above image is only pictorial view, Actual may vary depending on model capacity.
Explanation of Buttons (Applicable for 678 Series)

Explanation of Buttons (Applicable for 698 & 528 Series) Explanation of Buttons (Applicable for 789 & 826 Series) Explanation of Buttons (Applicable for 707E,306ES5,1269DB & AE/FE)

*Above image is only pictorial view, Actual may vary depending on model capacity.

Indicator moge:and meaning
Off
Flashing: indicate the running program, or indicate the selected mode or indicate the water level
On: indicate the program about to run.or indicate the selected mode or indicate the water level

| Digital tube
---|---
● It displays total remained time during the running program (min).it displays the remained reserve time during delay program(hours) .
● It displays abnormal symbol in abnormal situation.
● It displays – during detecting,the actual washing time might be different with display time under the condition of different water presure.different cloth material and different loading cloth.

Child lock function

• The function is intended for children safety and preventing the washing program from accidental changes by children

• (Applicable for 707, 708, 707E, 1269DB, 306, AE & FE Series)
  Set the desired washing program, after setting, press the Start/Pause button, and washing machine begin to run. Then hold the water level button and delay/program button at the same time for more than 3 seconds, you will hear three beep sound, digital tub display”CL”,and the child lock will activate. The circular indicator light under right corner of the digital tube will flash, All of the bottons are locked and have no function.

• (Applicable for 789 & 826 Series)
  Press the Start/Pause button, and washing machine begin to run. Then hold the Process and DIY button at the same time for 3 seconds, you will hear 3 beep sound and Child lock will activate and “CL” will display.

• Release the child funtction: Press the water level button and delay botton at the same time for more than 3 seconds,After three beep sound. the child lock function is released, or the machine will set to child lock function automatically for using every time. Note: if you open the lid when the child lock activates,digital tube displays “E2°, beeps and stops running; if the safety can be sured and you need to go on with running ,you need close the lid,press the water level button and delay botton at the same time for more than 3 seconds to released the child lock function and then continue running,or the washing machine will drain after 10 seconds,and power will be off after 10 minuters.

(Applicable for 698 & 528 Series)
J thild lock”button
The function is intended for children safety and preventing the washing program from accidental changes by children
(Applicable for 678 Series)

• Set the desired washing program after setting , press the Star/Pause Button, and washing machine begin to run. Then hold progress Button and Delay Button at the same time for more than 3 seconds, you will hear three beep sound, digital tub display “CL”, and the key lock will activate. All of the buttons are locked, and will not function.
• Release the Key Lock function:
  Press the program Button and delay at the same time for more than 3 seconds, after three beep sound, the Key Lock Function is released.
  Note: If you open the lid when the Key Lock activate, digital tube display “E2”, and beep , you need close the lid and press the Start/Pause to cancel, or washing machine will drain after 10 seconds, and power off after 10 minutes.

Additional Program features for 678 Series
Tub Dry
Push the “Tub Dry” button to select the tub dry procedure. The purpose is dry the outer tub and the inner tube , which can avoid growing mildew on the outer and the inner tube.
Air Dry
Push the “Air Dry” button to select the air dry procedure . The purpose is dry laundries. The max drying capacity of the fibre laundries is 2.5kg.
“Air Dry” Program cannot be reserved.
Reserve Water
Push the “Reserve water” button to select reserve procedure. It will not drain off water unless press the “start/pause”, the water will drain in container that more lower.
It will reserve 4 hours if the procedure involved function of “Rinse” and alarm every 15 minutes.
Like the button of “wool” “Drum Clean ” “Anti Blanket” “Spin”, it has no the function.
Door Lock Feature
In case of sudden power cut, top lid will not open and need to wait till power resumes.
Spin Program Selection Method for 789 Series
1. Push the “power” button and then “Process” button.
2.1 Change water level (0-10 level): Push “DIY” to change level.
2.2 Change wash time(0-25 min). Push the process button till light blink on wash time. Push “DIY” to change time.
Note: Set wash time 0 to eliminate washing operation.
2.3 Change rinse time(0-3 min). Push the process button till light blink on rinse time. Push “DIY” to change time.
Note: Set Rinse time 0 to eliminate rinsing operation.
2.4 Change Spin time (0-9 min). Push the process button till tight blink on spin time.
Push “DIY” to change time.
Note: if user want to spin only, Push “DIY” to set wash time & rinse time into Zero.
3 Push “Start” Button to run machine.

•Push the ” Power ” button to switch on the power.
•Under power-on mode, push it to switch off the power.
•Push the ” Power button to switch on the power. If the” ” Pause button is not pushed, the machine will switch off the power automatically after 5 minutes.
START/PAUSE| Start B “ ” button
---|---
•After the power is switched on,press it to start the machine .
•During working, push it to pause.
•During pause, push it to restart and go on working.
| C ” Power ” button
---|---
Program| Application| Program| Application
Wash| Just run the washing cycle without drainage cycle, the detergent wash left in the tub and can be recycled.| Normal| Recommended for mixed fabrics and general clothing items.
Ideal Cleaning Program.
Haier Recommends to use Ariel /Tide for best stain removal in 1 wash.
Rinse| Remove the left detergent from the clothes and then rinse the clothes.
Spin| start extraction program when the wash program ends or the clothes are wet.| Soak| Washing the relatively big thick or very dirty laundries.
Tub Dry| The purpose is drying the inner tub and the outer tub, which can avoid growing mildew.| Delicate| Washing for light-soil saving laundries
| | Quick| Quick washing for normal laundries.
| D “ Delay * button
---|---
● During operation, the digitron tube will display the remained time (hours).
● Push down the delay button. The delay indicator light is on ,the digitron displays the delay time of finishing washing (in hour). The point light flashs to indicate in the reverse mode.
| E’ botton
---|---
● During the Normal, cycles the washing machine will detect the size of the laundry and automatically select the water level between levels 4,6 or 8.
● To change the water level, press the Start/Pause button and make your selection by pressing the “Water Level” button until desired level is shown (1-8 ).
● If there is water inside the tub and the machine cannot detect the laundry load, it will display water level “4”. If there is wet clothes in the tub, it may display water level”8”, you must select suitable water level by yourself.
● During operation of the wash, or rinse program, you can adjust the water level by pressing the Water Level button.
● The water level of the wool/Blanket cycles can select between 2-6.
● The water level may vary due to the different moisture level of the laundry items.
| C ” Program “button for 698 & 528 Series
---|---
Flash| Application| Normally on| Application
Heavy| To clean very dirty clothes| Normal| Use this cycle for normally soiled
cottons and mixed fabric loads.
Eco| Energy saving program| Strong| Use this cycle for heavily soiled durable garments.
Wool| Machine washable woolen items| Standard| This cycle is for national senergy efficiency standards testing.
Silk| To wash silk clothes| Quick| Quick washing for normal laundries
Kids Wear| To clean kids clothes| |
| D,F,G,H,I button
---|---
To adjust the water level, spin time, rinse times ,wash time,soak time and other parameters.
| K “Function”button
---|---
● To chose | wash,Air Dry and Reserve water function
| Program “button for 789 Series
---|---
Flash| Application| Normally on| Application
Deep clean| To clean very dirty clothes| Normal| Use this cycle for normally soiled cottons and mixed fabric loads.
Delicate| Washing for light-soil saving laundries| Strong| Use this cycle for heavily soiled durable garments.
Wool| Machine washable woolen items| Standard| This cycle is for standard energy testing.
Silk| To wash silk clothes| Quick| Quick washing for normal I aundries
| E “Process “button
---|---
● To select water level, wash time, rinse times , spin time and I WASH. When the process is selected, push DIY button and then adjust the parameters.
● Push process button for 3S and then enter I WASH process. After selecting favorate programs and parameters, the user push Start/Pause button and the machine will record use’s favorate programs and parameters. The user can use the recorded setting to wash clothes next time.
● To adjust the water level, wash time, rinse times and other parameters.
G “Cycle” Knob for 678 Series

Program| Recommend
Cotton| Washing Cotton laundries
Eco| The cycle of energy saving
Express| Lightly soiled or small laundry loads less then 1.5.kg
Sports| Washing Sports clothes
Wool| Machine washable woollen items
Heavy| Heavy Washing
Anti Crease| Washing t-shirts, shirts laundries
Delicate| Delicate items that are machine washable
Blanket| Washing Blanket
Towels| Washing Towels
Baby care| Washing baby’s clothes
Tub Clean| Cleaning the inner and outer tub to avoid the growth of mildew

OPERATING PROCEDURE

1. Push the button to switch on the power

2. Push the button to select suitable automatic program
   After the power is switched on, “Normal” is automatically set. To select other fully-auto program,please push the “Program” button till the corresponding indicator is light.
   For an example: select Quick for the quick washing of the laundries with light dirt.

3. Push the button, select suitable water level
   After switching on the power, when the normal program is selected , the washing machine will execute fuzzy program automatically to detect the cloth . After detection, it can set the water level automatically. To select other water level, first push the “START/PAUSE” button, then push the “Water Level” button to set the water level.

4. Push the button, select suitable procedure
   After switching on the power, when the normal program is selected , the washing machine will execute fuzzy program automatically to detect the cloth -After detection, it can set the water level automatically.

5. Push the button to select suitable reserve wash program
   After switching on the power, the reserve time program is set to off mode automatically. If you need to set the washing procedure to be finished at delay time, please push the “Delay” button to set the reserve washing program.
   ● Confirm the reserve program
   The washing will finish about 18 hours later.
   ● When the “Delay” function is activated, the indicator light of the program you have set will be off. The “Delay Time” and “Remaining Time” indicator lights will be on. Gi?
   ● During reserve procedure, push the “Delay” button to display the relay mode.
   ● To change the running program or cancel the relay setting, you need to switch off the power and make new selection.

6. Push the button to select suitable water level, wash time, rinse times and spin time

7. Push the button, close the top lid
   If the top cover is opened , the washing machine will stop running and tweet during spinning, then close the lid, you must push the START/PAUSE again to continue running.

8. Push the button to select the suitable time or times.

9. Push the child lock button to set function.

10. Push the Fuction button to select | Wash,Air Dry, Reserve Water.
    I Wash: Memory user personalization program settings. When select I Wash function, set other function and parameter, then push Start/Pause button. Washing machine will remember the program. When choose the program next time the program default the last setting.
    Air Dry: This machine can air dry chemical fiber clothing 1.5kg
    Reserve water: In order to save water , setting this function. Chose this program, washing machine will not drain off water during program, and retained water can be used. The drainage pipe outlet put on the basin and other containers to collect water. Attention: In order to discharge the water, the drain will be lower than the whole machine drain pipe. After completion of the collection, the drainage pipe inserted into the floor drain in the program to run. If choose this program, after the last rinse finish. Washing machine will retain water for about four hours, and buzzer make a sound every 15 minutes to prompt user to collect water. After collecting water, washing machine go on running next program. If there is no collection of water within four hours, the machine automatically drains and run next program.

11. Push the button,close the top lid
    If the top cover is opened , the washing machine will stop running and tweet during spinning, then close the lid,you must push the START/PAUSE again to continue running.

C “Water Level” button

• Tochange the water level, press the Start/Pause button and make your selection by pressing the “Water Level” button until desired level is shown.
• If there is water inside the tube and machine cannot detect the laundry load, it will display level “Mid”, you can then manually adjust to the desired water level.
• If Express program is selected the water level cannot be manually adjust to the desired water level.
• If Drum Clean program is selected the water level cannot be manually overridden.
• During operation of the wash, or rinse program, you can adjust the water level by pressing the Water Level button.
• The water may vary due to the different moisture level of the laundry item.

D “Soak Time””Spin Time”

• Each program can be changed the Soak Time, Rinse, SpinTime except wool, Soft Wash Blanket and Drum clean. Express cannot change the So Time and Drum clean cannot change these buttons.

E “Progress” button

• You may change the Progress when Cotton, Eco, Sports, Heavy Delicates Towels Baby Care cycles are selected.
• You cannot change the Progress When Express, Drum Clean, Wool, Soft Wash and Blanket are selected.

FINISH WASHING

The machine will beep to indicate the end of the cycle then automatically cut the power off

AFTER WASHING

• Please first pull off the power blug from the receptacle before cleaning.
• After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine.
• The lint filter must be used during washing.
• It must be cleaned in time after each using

The methods of dismantle and install lint filter as follows:

1. Push down the spring piece of the top lint filter to make the claws out of the filter cover, and then pull out the lint filter to get it down. (figure 1)
2. Pull the back cover of the lint filter, and then you can get down it off the front cover (figure 2)of the lint the lint filter.
3. Sweep the rubbish in the lint filter.
4. Put the back cover of the lint filter into the front cover. (figure 2)
5. Put the lint filter into filter cover, and make it tight.
6. Make sure the lint filter is well installed, or it can influence your use.

The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet
Please clean it with brush after every 15 days.

If the cabinet is dirty, wipe it with wet cloth

• Do not flush it directly with water.
• Wipe it with neutral detergent.
• Do not wipe it with thinner, petrol, alcohol etc.

1. After washing, close the water faucet. (If needed, you can dismantle the water inlet hose.)
2. Do not store water in the washing machine for a long period. Drain the water completely after each using.
3. Be sure to pull off the power plug before maintenance.
4. Hang up the power cord and drain hose.
5. Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid.

ENERGY SAVING GUIDE
To enter into the Energy Saving Mode follow below guide:

1. Press the Power button to turn Power On.
2. Press the Porgram button to select the Delicate Program. and Select the Maximum Water Level
3. Close the Lid & Press Start/Pause Button.

NOTE

• Under test Conditions, When tested accordance with standards IEC 60456: 2010 & BEE schedule 12 (Revision-3)
  Actual Performance of machine will depend on how the appliance is being used.

• For best washing result we recommend to mix the detergent powder in warm water and pour directly into the drum tub before putting the clothes. (Rated Capacity Load)

TROUBLE SHOOTING ANSWER TO QUESTION

(If there’s breakdown, please pull off the power plug before checking) The following phenomena are not breakdown sometimes. Please confirm again before sending it to repair.
If there are real breakdown, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself.

or close the top lid and press the START/PAUSE button
Problem| Possible causes| What to do
---|---|---
Rinse
Spin | • Is the drain hose blocked?| • Remove the blockage
• Press the Start/Pause button once.
Wash
Rinse
Spin | • The top lid is not closed.| • Close the top lid.
• Press the Start/Pause button once.
Wash
Rinse | • Has the laundry been placed unevenly in the machine?
• Is the machine level?| • Redistribute the load evenly. Press the Start/Pause button.
Wash
Rinse
Spin
Tub Dry | • The water level sensor has failed.| • Level the machine.
• Please contact Customer Care
Wash
Spin | • The water top is not open.
• The water inlet valve is blocked.
• The water pressure is too low and the current is too small.| • Open the top. Press the Start/Pause button once.
• Clean the water inlet waive, Press the Start/Pause button Wait for the normal water pressure before use.
No or slow drain, the digitron displays “E 1”, buzzing.| • Is the drain hose put down?
• Is the drain hose blocked by foreign material?| • Put down the drain hose.Open and close the top lid once, then press the START/PAUSE button
• Clean the foreign material.Open and close the top lid once,then press the START/PAUSE button
Safety switch actuates, not spin, (after self-correction twice ,the digitron displays “E3”,buzzing.| • Are the laundries put slantingly?
• Is the machine slanting?| • Re-order the laundries.Close the top lid and press the START/PAUSE button.
• Level the machine in right position
No or slow water filling, the digitron displays “E4”, buzzing| • The water tap is not open.
• The water intel valve is blocked.
• The water pressure is too low and the current is too small.| • Open the tap.Open and close the top lid once, then press the START/ PAUSE button.
• Clean the water inlet walve,Open and close the top once.then press the START/PAUSE button.
• Wait for the normal water pressure before use.
the digitron displays “FA”, buzzing| • Water level sensor is abnormal?| • Please contact with after-sales service depeaertment.
The machine does not act.| Not wash| • Is there power failure?
• Is the power plug inserted tightly?
• Is the water level reached preset position?
• Is the lid closed?| • Use it when there’s power supply.
• Insert the power plug tightly.
• Fill water to the preset position
• Close the top lid
Not spin| • Is the power plug inserted tightly?
• Is the top lid closed reliably?
• Are the laundries set flat?| • Insert the power plug tightly.
• Close the top lid.
• Set the laundried flat.
There’s abnormal sound inside the machine| • Is the machine slanting?
• Are the laundries put slantingly in\ spinning?| • Adjust the machine to be even.
• Reorder the laundries and close the top lid.
The water tap leaks| • Is the jointer of water inlet hose loose or twisted away?| • Fasten the jointer properly.

Note: when the digital tube displays the abnormal symbol during working,it buzzs once in succession every two minutes,then the power will be cut automatically after ten minutes.
H “START/PAUSE”” button
After the power is switched on press the “Start/Pause” button to start the machine.

• During operation, push the Start/Pause button to pause the machine.
• Push the Start/Pause button again to start the machine.

Common phenomena

avoid slanting.
• Select spin program, but it does not work.| • The program is setting the drain time , certain period is needed before it starts spinning.
• There may be some water flowing out of the drain hose in the first use of the machine.| • It is the water remained performance inspection by the factory.
• The pulsator pauses during water inlet in wash and rinse.| • It is to avoid splashing during water inlet.
• When the power plug is inserted, computer board indicator is switched on, and the machine starts working.| • It is the special resume function. In the case of power failure or the power plug is loose during washing, the machine can save the running program, and resume the program after the power supply is recovered. You do not need to set the program again.

Common Occurrences

close the top lid.
Select spin program, but it does not work.| The program is setting the drain time, there will be a pause before the spin program starts.
There may be water in the drain Pipe.| It may be residual water after performance inspection by the factory.

Packing List

SPECIFICATION

Capacity Series| Water Level / Water Quantity| Injection Pressure (MPa)| Rated Voltage Frequency| Wash & Capacity
---|---|---|---|---
HWM60-707NZP Series| 1/12 2/18 3/24 4/29 5/33 6/37 7/41 8/46| 0.01MPa-1.0MPa| 220V∼50Hz| 6.0Kg
HWM62-707 Series
HWM65/70-306ES5| 1/12 2/18 3/24 4/29 5/33 6/37 7/41 8/46| 0.01MPa-1.0MPa
6.2KgI6.5Kg/7.0Kg
HWM62/65-707E /AE/FE HWM60/65-1269DB| 1/12 2/18 3/24 4/29 5/33 6/37 7/41 8/46| 0.03MPa-1.0MPa| 6.5Kg/6.2Kg/6.0Kg
HWM65-707NZP Series
HWM70-708 Series,HWM65170-30688| 1/15 2/21 3/27 4/33 5/39 6/43 7/48 8/54| 0.01MPa-1.0MPa| 6.5Kg/7.0Kg
HWM70-AE/FE/1269DB Series| 1/15 2/21 3/27 4/33 5/39 6/43 7/48 8/54| 0.03MPa-1.0MPa| 7.0Kg
HWM65-698 Series HWM65/70-826NZP Series| 1/142/18 3/22 4/26 5/30 6/35 7/40 8/45 9/50 10/54| 0.01 Mpa-1.0 MPa| 6.5Kg/7.0Kg
HWM70-707NZP Series| 1/20 2/29 3/38 4/46 5/54 6/60 7/65 8/70| 0.01MPa-1.0MPa| 7.0Kg
HWM70-698 Series| 1/18 2/24 3/30 4/36 5/42 6/48 7/54 8/60 9/65 10/70| 0.03MPa-1.0MPa| 7.0Kg
HWM70-278 NZP Series| 1/18 2/24 3/30 4/36 5/42 6/48 7/54 8/60 9/65 10/70| 0.03MPa-1.0MPa| 7.0Kg
HWM70-789 Series| 1/14 2/18 3/22 4/26 5/30 6/35 7/40 8/45 9/50 10/54| 0.03MPa-1.0MPa| 7.0Kg
HWM72-678NZP Series| 1/20 2/26 3/32 4/38 5/44 6/50 7/56 8/62 9/68 10/70| 0.03MPa-1.0MPa| 7.2Kg
HWM75-707NZP Series
HWM75-708NZP Series| 1/20 2/29 3/38 4/46 5/54 6/60 7/65 8/70| 0.01MPa-1.0MPa| 7.5Kg
HWM75-678 NZP Series| 1/20 2/26 3/32 4/38 5/44 6/50 7/56 8/62 9/68 10/70| 0.03MPa-1.0MPa| 7.5Kg
HWM78-789 Series HWM75/80-826 Series| 1/18 2/24 3/30 4/36 5/42 6/48 7/54 8/60 9/65 10/70| 0.03MPa-1.0MPa| 7.8Kg /7.5Kg18.0Kg
HWM80-AE/FE/1269DB Series| 1/20 2/29 3/38 4/46 5/54 6/60 7/65 8/70| 0.03MPa-1.0MPa| 8.0Kg
HSW80/82/85-789 Series| 1/20 2/26 3/32 4/38 5/44 6/50 7/56 8/62 9/68 10/73| 0.03MPa-1.0MPa| 8.0Kg/8.2Kg/8.5Kg
HSW82-528NZP Series| 1/20 2/26 3/32 4/38 5/44 6/50 7/56 8/62 9/68 10/73| 0.03MPa-1.0MPa| 8.2Kg
HWM85-678NZP Series| 1/20 2/29 3/38 4/46 5/54 6/60 7/65 8/70| 0.03MPa-1.0MPa| 8.5Kg

E-WASTE GUIDELINE FOR HAIER INDIA

What is E-Waste or Electronic Waste?
Electronic waste @ e-waste is a term which refers to unusable, discarded and old, electric & electronic appliances such as refrigerators, LED/LCD/CTV, microwave oven, washing machines, home air conditioner, etc. As per E-waste (Management and Handling) Rules, 2016 e-waste ‘e-waste’ means electrical and electronic equipment, whole or in part discarded as waste by the consumer or bulk consumer as well as rejects from manufacturing, refurbishment and repair processes has been categorized into three main categories, i.e., Consumer Electronics/Home appliances and IT & Telecom. Refrigerators, washing machines, home air conditioner LED/LCD, etc. represents Consumer Electronics /home appliances. On the other hand computers, desktop, laptop mobile phones, etc. and its component represents Telecom & IT.
E-waste broadly covers waste from all electronic and electrical appliances and contains different hazardous materials which are harmful to human health and the environment if not disposed of carefully. While some naturally occurring substances are harmless in nature, their use in the manufacture of electronic equipment often results in compounds which are hazardous for example chromium becomes chromium VI.
Thus Ministry of Environment, Forest & Climate Change, Govt. of India had listed issued directions for the reduction in the use of hazardous substances in the manufacture of electrical and electronic equipment and their components or consumables or parts or spares.
The Ministry of Environment, Forest & Climate Change, Govt. of India in furtherance of its effort to reduce the hazard occurring from rapid growth in the Consumer durable and IT-Telecom market had made rules called as E-Waste (Management and Handling) Rules, 2016 under Environment Protection Act.
HAZARDS OF IMPROPER HANDLING AND/OR IMPROPER RECYCLING OF ELECTRONIC WASTE
Electronic equipment contains many hazardous metallic contaminants such as lead, cadmium, and beryllium and brominated flame-retardants. An improper handling and/or improper recycling of the Electronic Waste results in these hazardous metals/substances getting released into our eco and biological system, thereby leading to various health hazards. The Hazardous contents in the electronic equipment include:
Health:- The informal method of recycling extended health hazards. For example, primary and secondary exposure to toxic metals, such as lead, results generally from open-air burning used to retrieve valuable components such as gold. Incineration from burning e-waste creates fine particulate matter, which is linked to pulmonary and cardiovascular disease.
Environment:- The informal method of recycling extended environment hazards too. For example when different e-waste is burnt to extract metals from it, toxic chemicals are released into the air, damaging the atmosphere.

• Lead
• Brominated Flame Retardants
• Chromium
• Mercurys Beryllium
• Cadmium
• Barium
• CarbonBlack
• Phosphor

E WASTE TOXIC COMPONENT & THEIR DAMAGE TO HUMAN HEALTH

Toxic Materials| Birth Defects| Brain Damage| Heart, Liver, Lung & Spleen Damage| Kidney Damage| Nervous/ Reproductive System Damage| Skeletal System Damage
---|---|---|---|---|---|---
Barium| | X| X| | |
Cadmium| | | X| | |
Lead| X| | | X| X| X
Lithium| X| X| | X| X|
Mercury| X| X| X| X| X|
Nickel| X| X| X| X| |
Palladium| X| | X| X| |
Rhodium| X| | X| X| X|
Silver| | X| X| | |

Without safe recycling, most of these toxic components will end in land fill- poisioning soil and water.
The Dos of Electronic Waste Recycling:

1. Give the discarded Electronic Equipments only at the authorized collection centres so that the same can be properly recycled
2. Drop the discarded Electronic Equipments only in the bins meant for the Electronic Waste
3. Consult the authorized service centre as to whether the Electronic Equipment can be repaired or not, before discarding the same
4. Tell your neighbours and other persons about the hazards of improper disposal or handling or improper recycling of the Electronic Waste
5. If the unwanted Electronic Equipment still work or can be repaired then consider donating them

The Don’ts of Electronic Waste Recycling:

1. Don’t dump the discarded Electronic Equipment in open or in any Land Fill Site as the same will result in contaminating the Soil and the groundwater
2. Don’t dispose of the discarded Electronic Equipment in household bins or Municipal Bins
3. Don’t sell or give your discarded Electronic Equipment to any Trash Dealer or Kabadiwala
4. Recycling Electronic equipment helps to save natural finite resources and also reduces the environmental and health risks associated with improper handling/disposing of the Electronic Waste
5. To minimize our impact on the earth and to protect the environment for future generations return your discarded Electronic Equipment here for safe recycling:

Why proper handling and management of e-waste is required?
According to MoEF, the electrical and electronic equipment (EEE) have valuable materials and hazardous/toxics substances in their components. The electronic products and electrical equipment after their useful life may not cause any harm if it is stored safely in households/stores. However, if the E-waste is opened-up and attempts are made for the retrieval of useful components or material in an unscientific manner or if the material is disposed of in open, then it may cause health risks and damage to the environment. E-waste can be considered as a resource that contains useful material of economic benefit for recovery of plastics, iron, glass, aluminum, copper and precious metals such as silver, gold, platinum, and palladium and lead, cadmium, mercury, etc. However, at the same time presence of heavy metals (As, Cd, Hg, Pb, etc.) and other toxic substances such as polychlorinated biphenyls (PCBs), etched chemicals, etc. may pose risk to health and environment during handling and recovery operations. E-waste is a problem of increasing proportions especially when crude methods are adopted for the recovery of useful components from E-waste. Thus, there is a need to encourage the recycling of all useful and valuable material from e-waste so as to conserve the ever depleting natural resources. The electronic component is increasingly made from recycled materials, for example for making new LCDs, more than 50% of indium is sourced by recycling used LCDs. The E-waste thus presents a scenario of urban mining for recovery of ferrous/non-ferrous/ rare earth metal and precious metal in addition to plastics and glass. However, the presence of hazardous and toxic substances in the component of e-waste necessitates environmentally sound management of e-waste including collection and recycling/treatment in an environmentally sound manner.
Management and Effect on sustainable future:-
Sustainable development as defined by Brundtland Commission is “development that meets the needs of the present without compromising the ability of future generations to meet their own needs. The e-waste since a long time had been seen as an easy and cheapest source of metals. However, due to the lack of proper consideration for such a source of metals as well as proper methods of recycling in India, we sent our e-waste to the improper channel and thereby participated in degrading the environment. Moreover, through this improper method of extraction of metals we till date had wasted at least forty percent of the precious metals and simultaneously caused damage to our environment. If we opt the proper way to extract metals through proper channels of recycling then we can achieve Ninety percent of the extraction rate of our metals as well as a better way to save our environment. However, if today while selling off our material to the improper channel we will not think about our sustainable future then it is for sure that the coming generations will be facing crisis of the metals.
Customer/end-user responsibility

1. Consumers shall ensure that their end of life product/e-waste is channelized through collection center or dealer of the authorized producer or dismantler or recycler or through the designated take-back service provider of the producer to authorized dismantler or recycler;
2. Consumers shall ensure that such end-of-life electrical and electronic equipment are not admixed with e-waste containing radioative material:

Bulk Consumer Responsibility:-

1. Bulk consumers of electrical and electronic equipment shall ensure that e-waste generated by them is channelized through collection center or dealer of authorized producer or dismantler or recycler or through the designated take-back service provider of the producer to authorized dismantler or recycler;
2. Bulk consumers of electrical and electronic equipment shall ensure that such end-of-life electrical and electronic equipment are not admixed with e-waste containing radioactive material as covered under the provisions of the Atomic Energy Act, 1962 (33 of 1962) and rules made thereunder;
3. Bulk consumers of electrical and electronic equipment listed in Schedule | shall maintain records of e-waste generated by them in Form-2 and make such records available for scrutiny by the concerned State Pollution Control Board;
4. Bulk consumers of electrical and electronic equipment listed in Schedule | shall file annual returns in Form-3, to the concerned State Pollution Control Board on or before the 30th day of June following the financial year to which that return relates;
5. Incase of the bulk consumer with multiple offices in a State, one annual return combining information from all the offices shall be filed to the concerned State Pollution Control Board on or before the 30th day of June following the financial Year to which that return relates.

Haier’s Responsibility
Haier India being a responsible and trustworthy brand is taking all the necessary and expected steps for the betterment of the environment as well as living beings. Haier had joined hands with a number of recyclers to ensure environment-friendly recycling of the electronic items, such as refrigerators, washing machines, air conditioners, etc. that are either achieved their end of life or are old, unusable, etc.Apart from above, Haier had taken the following steps for proper recycling of e-waste of its customers:-

1. Collection and Channelization of e-waste:- Haier had setup toll free Number where the customers can call and registered their products for recycling. As soon as e-waste pick up is registered by the customer a representative will come to collect the product.
2. Dismantling & Recycling of e-waste: Haier has appointed a number of recyclers who are the leading name in the recycling industry to responsibly and in an environment-friendly manner recycle the e-waste generated in India.
3. Awareness for e-waste: Haier is actively sharing Infographics & engagement posts on its social platforms to create more awareness about e-waste and its hazards. In addition Haier is also conducting awareness programs in Schools, RWA’s, Office Clusters etc to create awareness.

Collection Centre maintained by M/s WEEE- PRO Resource Recovery Solutions Private Limited (as on date)

9302734152
Maharashtra| Plot No. 92, Gali No.— 01,Sector 19C VashiNavi Mumbai-400705| Balwan Singh| 9372166155/ 9371644600
Shop 3, Kachore Complex Amravati Road, Waddhamna Maharashtra — 440023| Balwan Singh| 9860814787
Plot No 24, Sector 4, Shikshak Colony Near Spine City, Moshi Pradhikaran Maharashtra 412105| Balwan Singh| 9370939911
New Delhi| Plot No. 619, Block A, Near Tata Telco Service Station, Rangpuri, Mahipalpur Delhi – 110037| Rajku
Poonia mar| 9810053907
Orissa| 1st Floor Delta house Rajendra NagarMadhupatna Cuttack, Orissa| Mr. Nihar Mahapatra| 9337902236
Punjab| Shop No: -15 & 16, Pabhat Road, Opp — Tennis Academy, Zirakpur, Punjab-140603| Mr. Sanjeev| 9316166155
Rajasthan| Plot No.81, 200 ft. By Pass,Near Ajmer, Road, Heerapura, Rajasthan —302021| Mr. Yogesh Saharan| 9309413301
Tamil Nadu| 3/27 Sakthi Garden Phase II, Senneerkuppam, Poonamallee, Near Bisleri Water Plant Tamil Nadu- 600056| Mr. Firoj Khan| 9363166155/ 9362005006
Telangana| Shop No.-4, Block-3,4th Shatter at 179, MPR Estates Near Old Check Post, Secunderabad Telangana — 500011| Mr. AjaSi| 9395166155/ 9396166155
Uttar Pradesh| S 317, Transport Nagar, Near RTO Office Lucknow UP-226012| Anuj Poonia| 9335166155/ 9305166155
Bh —122, Sector 70 Noida UP- 201301| Anuj Poonia| 9999166155
West Bengal| 156N73, Northern Park, B.T. Road DUNLOPWB — 700108| Mr. Vinod Kumar| 9331522536
West Bengal| R K Enterprise, Block Singhia, West Bengal 848209| Mr Navaid| 9027392259

Our PRO Partners (E-waste Partner) (as on date)

1. M/s WEEE- PRO RESOURCE RECOVERY SOLUTIONS PRIVATE LIMITED
   Address : Flat-702, Tower-6, Unitech Horizon, Plot No.-6, Sector Pi- 2, Greater Noida,, Noida, Gautam Buddha Nagar, Uttar Pradesh, India, 201310
   Contact Details : Mr Bhagwati Prasad Suman ; 9958445960 ; info@weee- pro.org ; 1800-572-2961

2. PEGASUS SUSTAINABILITY PRIVATE LIMITED
   Address : F-6, 1ST FLOOR, 4648/1, 21, ANSARI ROAD, DARYAGAN4J, New Delhi, Delhi, 110002
   Contact: Mr. Subratoo Mukherjee ; 9811707777; http://www.pegasusnetwork.in 1800-420-3177

3. M/s Green Planet
   Address: 17D, 105, Vasundhra, Gaziabad 201012
   Contact Details : Mr. Anish Duggal ;9212503521; http://greenplanetpro.in/ 1800 8430 027

HAIER WARRANTY
HAIER APPLIANCES (INDIA) PVT. LTD. (hereinafter referred to as “the Company”) hereby offers the following warranty to the original domestic purchaser commencing from the date of the purchase. The Company, at its sole discretion, will free of charge repair or replace any defective part or parts which prove to be defective in workmanship and/or materials and not due to abnormal or improper usage.

1. This warranty will automatically terminate on the expiry of the warranty period from the date of delivery.

2. The Company is not liable for any delay in servicing due to reasons beyond the control of the Company or any of its authorised service centres.

3. Parts replaced or repaired under this warranty are warranted throughout the remaining of the original warranty period.

4. It is entirely left to the Company’s discretion to repair/replace parts at the site of installation or at the authorised service centre of the Company.

5. This warranty shall be strictly limited to the repairs or replacement of defective parts specified in the warranty. This warranty shall not cover any consequential or resulting liability.
   | Warranty
   ---|---
   Product| Period| Parts not Covered
   HWM60/70-1269DB Series| Comprehensive – 24 Months
   Motor – 120 Months| Plastic Parts, Top Lids, Drain Pipe, Inlet Pipe, Magic Filter
   HWM62/65/70/80-AE/FE/1269DB Series| Comprehensive 24 Months
   Motor – 120 Months
   HWM60/62/65-707 Series| Comprehensive – 24 Months
   Motor – 120 Months
   HWM65/70-698/826 Series| Comprehensive – 24 Months
   Motor – 120 Months
   HWM70-707 Series| Comprehensive – 24 Months
   Motor – 120 Months
   HWM70-708 Series| Comprehensive – 24 Months
   Motor – 120 Months
   HWM70-698 Series| Comprehensive – 24 Months
   Motor – 120 Months
   HWM70-789 Series| Comprehensive – 24 Months
   Motor – 120 Months
   HWM75/80-826 Series| Comprehensive – 24 Months
   Motor – 120 Months
   HWM70-707E Series| Comprehensive – 24 Months
   Motor – 120 Months
   HWM65-707E Series| Comprehensive – 24 Months
   Motor – 120 Months
   HWM65-306 Series| Comprehensive – 24 Months
   Motor – 120 Months
   HWM70-306 Series| Comprehensive – 24 Months
   Motor – 120 Months

6. This warranty shall not, in any case, extend towards payment of any monetary consideration whatsoever or replacement orreturn of the product.

7. The Company may repair/supply parts free of cost during the warranty period. This warranty does not cover any Excise duty, Central or Sales tax, Octroi and other local taxes or levies onthe components/parts.

8. Theparts shall be replaced by functionally operating equivalent material only and not with brand new ones and are likely to be different from the one originally fitted. The parts thus removed shall be taken back by the Company.

9. The Company reserves the right to retain any part or component replaced at its sole discretion during the warranty period.

10. Inno event the Company or its authorised service centre be liable for any consequential damages or resulting liability, damage or loss arising directly or indirectly out of any defect in the product.

11. This warranty is not valid in case of the following events:
    a) Ifthe Product has been Installed/Serviced/Repaired/Opened or Tampered by any unauthorised personnel.
    b) If defects arise/caused by accidents, alteration, misuse, neglect, substitution of original components with spurious/non-genuine components, attacked by household pest / rodents, fire, flood, earthquake, lightning and/or any other act of God/natural calamities.
    c) The productis shifted outside India.

12. (a) Forany service under this warranty beyond city/town/municipal limits from the Company/authorised service centre, a fixed charge of Rs. 50 will be collected from the customer in addition to the actual to and fro charges by the shortest route
    (b) Service charges applicable after expiry of comprehensive warranty.

13. Any change of location or change in the ownership during the warranty period must be intimated in writing to the Company.

14. The Company’s employees or its authorised representatives have no authority to vary the terms of this warranty.

15. This warranty is effected in New Delhi and claims, if any, shall be made only before the courts having jurisdiction in New Delhi and no claim shall be made against the Company outside New Delhi notwithstanding that the Appliance may have been sold or delivered elsewhere.

HAIER APPLIANCES (INDIA) P. LTD.,
Building No -1, Okhia Industrial Estate, Phase-Ill, New Delhi-110020
Tel. : 011-39496000, 30674000,
fax :011-30674088,
Website : www.haier.com/in

Customer Name……………………..
Address…………………………………
Serial No……………………………….
Date of purchase…………………….
Dealer Seal…………………………….
Model No……………………………….

QR Code to directly chat with customer care executive.
(Customer Care WhatsApp No.: +91 8553049999)

https://wa.me/918553049999

Haier Appliances India Pvt. Limited
Building No. – 1, Okhla Industrial Estate,
Phase -3,New Delhi – 110020
https://www.haier.com/in/
Haier Careline: 1800-419-9999, 1800-102-9999
Tel.:011-39496000, 30674000.
Fax: 011-30674088,
Email: info@haierindia.com
Website: www.haier.com/in
HAIER WASHING MACHINE FAWM 0030515862F
FRONT PAPER 80 GSM MAPLITHO DOT 100 DT. 22/02/2022

References

• Home Appliances: Buy Refrigerator, Washing Machine, AC, TV and More | Haier India
• Home Appliances: Buy Refrigerator, Washing Machine, AC, TV and More | Haier India

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>