HOMYEDAMIC 9020-Blue1 Recliner Chair Massage Rocker Swivel Heated Instruction Manual

HOMYEDAMIC 9020-Blue1 Recliner Chair Massage Rocker Swivel Heated

Product Information

• The product consists of a backrest, seat base, reclining handle, accessories, screws, screwdriver, cup holders, armrest bags, Velcro, metal pieces, and backrest panels.
• The backrest is made of plastic and can be made more puffy by gently patting it.
• The backrest has an elasticity recovery rate of up to 95% within a maximum of 7 hours.
• The accessories shown in the pictures can be found at the bottom of the seat base when the reclining handle is pulled out.
• The parts with “R” (right) in the picture are 6-R-2, 3-R, and 4-R. These parts require 3 screws and a screwdriver for installation.
• An installation video is available on the product listing page.

Product Usage Instructions

1. Open the plastic bag and remove the backrest. Gently pat it to make it more puffy.
2. Allow the backrest to recover its elasticity for up to 7 hours.
3. Find the accessories at the bottom of the seatbase by pulling out the reclining handle.
4. Identify the parts with “R” (right) as shown in the picture: 6-R-2, 3-R, and 4-R.
5. Prepare 3 screws and a screwdriver for installation.
6. Place the 3-R on top of the 6-R-2 with the fabric facing outward. Align the screw holes and tighten the screws on the left side.
7. Tighten the right screw to secure the 3-R over the 6-R-2.
8. Place the 4-R on the shorter side of the 6-R-2 with the fabric facing outward. Align the screw holes and tighten 1 screw to secure it.
9. Place the 2-R on the longer side of the 6-R-2 with the cup holder portion facing the inside of the armrest.
10. Place the 2-R on top of the 6-R-2 and snap the top cup holder in place, aligning the holes underneath.
11. Prepare 2 white circle screws.
12. Tighten 1 of the white circular screws under the 2-R. Ensure it is tightened 80% to facilitate pulling off and closing of the cup holders.
13. Prepare the 6-R-1, 4 screws, and 1 screwdriver.
14. Align the shape of the outer frame and cover up the 6-R-1 with the side having holes facing out.
15. Tighten each of the 4 screws from left to right, first at 50% to prevent misalignment, then tighten fully.
16. Secure the bottom of the cup holder by tightening the other white circular screw from bottom to top at 80%.
17. Prepare 2 metal pieces, 4 screws, and 1 screwdriver.
18. Align each metal piece with the holes and tighten the top and bottom screws at 50% to secure them. Then tighten fully.
19. Repeat the same steps to tighten the other side as well.
20. Prepare the right armrest bag.
21. Align the zipper on the right armrest bag with the zipper on the armrest.
22. Ensure the zipper on the armrest is towards the side of the pocket and pull it back from the side of the cup holder.
23. Glue the Velcro to the inside, ensuring it is flat and wrinkle-free.
24. Align the metal piece of the right armrest with the metal edge on the left side of the cushion.
25. Insert the handrail along the metal tabs, from top to bottom, until a click is heard to indicate secure fastening.
26. Repeat the same steps to fix the left armrest to the left side of the cushion.
27. Place the backpack on top of the cushion.
28. Place the backrest panel on top of the backpack and match up the zipper heads.
29. Pull the zipper head from left to right to close it.
30. Lift up the fabric at the bottom of the backrest and align the pin tabs at the bottom of the backrest with the pin tabs at the back of the cushion.
31. Insert them from top to bottom until a click is heard to indicate secure fixing.
32. Insert the right back side panel, aligned with the metal pin tab on the right side of the backrest, from the top down.
33. Insert the left back side panel in the same way, from top to bottom.

Accessories Display

CAUTION: Please check and ensure all the things are in the package. You can contact us if something is not included. We will reply within 24 hours and try our best to solve it.

• Backrest and armrests are packed in a compression bag
• The backrest you received has been vacuum-packed.
• Open the plastic bag and take out the backrest.
• Gently pat it for a while and make it more puffy.
• Able to recover up to 95% of its elasticity after a maximum of 7 hours.
• For the accessories in the pictures above, you will find them at the bottom of seat base when you pull out the reclining handle.

Armrest Assembly

1. “R” means right and “L” means left. Find the parts with “R” (right) as shown in the picture, 6-R-2, 3-R, 4-R, and repair 3 screws and screwdriver. There is an installation video on our product listing, which can be seen at the end of the main picture.
2. Place the 3-R on top of the 6-R-2 with the fabric facing outward, align Sheen Hotel si tighten the
3. Then tighten the right screw to secure the 3-R over the 6-R-2.
4. Place the 4-R on the shorter side of the 6-R-2, also the fabric is facing outward, align the screw holes and tighten 1 screw to secure it.
5. Place the 2-R on the longer side of the 6-R-2 with the cup holder portion facing the inside of the armrest.
6. Place the 2-R on top of the 6-R-2 and snap the top cup holder in place, then align the holes underneath.
7. Prepare 2 white circle screws.
8. Tighten 1 of the white circular screws under the 2-R. This screw can be tightened 80%, otherwise, it will be hard to pull off and close the cup holders.
9. Prepare the 6-R-1 and 4 screws and 1 screwdriver at the same time.
10. Align the shape of the outer frame and cover up the 6-R-1 with the side with the holes facing out.
11. From left to right, tighten each of the 4 screws 50% first to prevent other holes from not aligning, then full tightening.
12. Secure the bottom of the cup holder by tightening 80% the other white circular screw from the bottom to the top.
13. Prepare 2 metal pieces and 4 screws and 1 screwdriver.
14. Align the metal piece with the holes first and tighten the top and bottom screws 50% of the way to secure it, then tighten them all the way afterward.
15. Follow the same steps to tighten the other side as well.
16. Prepare the right handrail bag.
17. Align the zipper on the right armrest bag with the zipper on the armrest.
18. The zipper on the armrest is towards this side of the pocket and pulls well back from the side of the cup holder.
19. Sue the Mean to the iete, making
20. Align the metal piece of the right armrest with the metal edge on the left side of the cushion.
21. Insert the handrail along the metal tabs, from top to bottom, and hear a click to indicate that the fastening is complete.
22. In the same way, turn the left armrest and fix it to the left side of the cushion.

Backrest Assembly

1. Place the backpack on top of the cushion.
2. Place the backrest panel on top of the backpack and match up the zipper heads.
3. Pull the zipper head well from left to right.

Sofa Assembly

1. Lift up the fabric at the bottom of the backrest, align the pin tabs at the bottom of the backrest with the pin tabs at the back of the cushion, insert them in from the top to the bottom, and hear a click to indicate that the fixing is complete.
2. Insert the right back side panel, aligned with the metal pin tab on the right side of the backrest, from the top down.
3. The left-back side panel is inserted with the same from top to bottom.

Wire Assembly

1. Pulling back the fabric at the bottom of the backrest and connecting the white to the white power cord is the massage function of the chair.
2. Connecting the red to the red power cord is the heating function of the chair.
3. Connecting the thinner black power cord to the power cord that has a plug is the energizing feature of the overall chair, which needs to be plugged into your home’s power supply before the chair is used.
4. Connecting the thicker black power cord to the power cord of the remote control is what controls the chair’s massage heat and time control.

PROPER USAGE

1. Steps to safely stand up from your Recliner Chair
2. So stereotype onto safely in
3. Place your feet firmly on the ground
4. Dany twenties ot the chair
5. Stand up slowly from an upright.
6. Bay is so ocean control not in use.

Fabrics will fade or discolor in direct sunlight, please minimize direct sunlight to extend the life of the furniture.

IMPROPER USAGE

1. DO NOT
   stand up when the footrest is in the upright position.

2. DO NOT
   wind up ten eur recliner chair

3. DO NOT
   stand up from your recliner chair with only one arm.

4. Please handle this with care as the product contains moving parts.

Only move the recliner when it is in the ‘upright’ or ‘closed’ position. Never attempt to move the recliner when it is in any of the reclining positions. Always use the arms to move the Reliner-DO NOT use the backrest or backrest ear parts.

WARRANTY

So glad you have completed the assembly and can enjoy it. If you are satisfied with our products, thank you for showing your favored massage recliner to your around. Our products come with a 2-month warranty, you can feel free to contact us at any time.
Methods:

• If you choose Amazon, go to your Amazon order detail page
• Order> sold by contact seller (guaranteed response within 24 hours)
• If you choose another platform, please contact us by:
• Email: service@wyidaseat.com/Please indicate the shopping platform you are using and the platform order number, we will reply to you within 24 hours).

AFTER-SALE POLICY

1. For return reasons:
   • Wrong purchase, bought by mistake, no longer needed, doesn’t meet expectation, a size smaller than expectation, customer needs to cover the return shipping fee.
2. For cancel order:
   • The customer needs to pay for the shipping fee and carrier handle fee if the item has been shipped out. To change address: the customer needs to pay for extra shipping fee and carrier handle fee if the item has been shipped out.
3. Customer Service:
   • Any problem with the product or shipping issue, please feel free to contact us, we will try our best to serve and help.

Dear Customer,
Thank you for choosing us.
For safe use, please read this manual before installation, and keep it for after use. Please feel free to email us if you have any concerns about our products. We’ll reply within 24 hours. The following are the things you need to pay attention to so that we can provide you with services when you encounter problems during the installation and use of the product:

• our customer site in mime to vertical problems, please contact
• We will rectify the issue as soon as possible: We provide a 7-day no-reason return service (note that the returned product will not affect the secondary sales);
• We offer product explanations, installation instructions, product maintenance, and maintenance methods.

If you feel satisfied with our product and service,

• Please set our store as your favorite;
• Please and eave us your course perfume in our store or product
• Flayers around line worm you will greatly help us offer better services to
• Best regards avoid entity damage fee pucha knife to cut open packing as you may
• E-mail:service@wyidaseat.com.
• www.wyidaseat.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>