MAXFREE F1 14 Inch Laptop Dual Screen Extender User Guide
- June 17, 2024
- MAXFREE
Table of Contents
MAXFREE F1 14 Inch Laptop Dual Screen Extender
Product Specifications
- Product Model: F1
- Product Weight: 1.81 KG
- Product Size: 385.5×248.8×20.7MM
- Resolution: 1920*1080P
- Panel Type: IPS
- Loud Speaker: 2 PCS
- TYPE-C Input: 5-20V/5A
- TYPE-C Output: 5-20V/4.25A
- Refresh Rate: 60Hz
Installation and Storage
Method of Unfolding
- Erect the support bar.
- Adjust the base size to fit the laptop.
- Press to pop up the screen.
- Remove the screens in order.
Installing the Screen
Horizontal screen installation:
Note : The maximum stretching length of the base is 400mm.
- Step 1: Align the card slot of the screen with the buckle in the shaft, and press it in the direction shown in the figure.
- Step 2: Press the screen in the direction shown in the figure until the screen snaps into place.
Vertical screen installation:
- Step 1: Align the card slot of the screen with the buckle in the shaft, and press it in the direction shown in the figure.
- Step 2: Press the screen in the direction shown in the figure until the screen snaps into place.
Various Applications of Dual Screens
- Bottom support small bracket
- Support small bracket
- Support small bracket
- Detached Mode
- Portrait Display
- Landscape Display
Connect F1 with Laptop
Connect F1 to your laptop and check that your laptop has a Type-C, Type-A, or HDMI port that can provide 5V/2A power. Connect F1 to your laptop through F1’s Type-C and MINI HDMI port, following the options below:
Connect to F1 through the Type-C interface of the notebook:
- Option 1: If your laptop has one Type-C port (full function port), and the Type-C output port of the laptop can provide more than 5V/2A power supply, directly connect the F1 and the laptop with Type-C cable.
- Option 2: If your laptop has one Type-C port (full function port), and your laptop Type-C outlet cannot provide more than 5V/2A power supply or the display has no signal/the signal is unstable after connection, then you need to connect an external 5V/2A adapter to power F1. Then connect the F1 to the laptop with Type-C cable.
FAQ
Q: What should I do if my laptop does not have a Type-C or HDMI
port?
A: If your laptop does not have a Type-C or HDMI port, you will need additional adapters to connect F1 to your laptop. Ensure that the adapters can provide the required power output for F1.
Q: Can I use F1 with mobile devices other than laptops?
A: Yes, you can connect F1 to mobile phones or other devices as long as they have compatible ports and power output requirements.
Q: How do I adjust audio settings on F1?
A: You can adjust audio settings by following the instructions provided in the Audio Settings section of the user manual.
Warning
Pay attention to the switching sequence of the screen
- Ensure that all connected cables are secure and not loose before usage.
- The continuous power required for this product is 10W. Please confirm that the Type-C or Type-A port of the laptop can withstand 10W (5V/2A), if not, the brightness of the product will be reduced to maintain the function.
Product Contents
Accessories
Carefully check package contents, if anything is missing or damaged, please contact Maxfree customer service for support: support@maxfree.com
Product Specifications
Product Model:| F1| Product Weight:| 1.81 KG| Product Size:|
385.5×248.8×20.7MM
---|---|---|---|---|---
Resolution:| 1920*1080P| Panel Type:| IPS| Loud Speaker:| 2 PCS
TYPE-C Input:| 5-20V/5A| TYPE-C Output:| 5-20V/4.25A| Refresh Rate:| 60Hz
Installation and Storage
-
Method of Unfolding****
-
Installing the screen
- Step 1: Align the card slot of the screen with the buckle in the shaft, and press it in the direction shown in the figure
- Step 2: Press the screen in the direction shown in the figure until the screen snaps into place
-
Various Applications of Dual Screens
-
Connect F1 with Laptop
Connect F1to your laptop and check that your laptop has a Type-C, Type-A or HDMI port that can provide 5V/2A power.
Connect F1 to your laptop through F1’s Type-C and MINI HDMI port, following the options below:
Connect to F1 through the Type-C
interface of the notebook-
Option 1: If your laptop has one Type-C port (full function port), and the Type-C output port of the laptop can provide more than 5V/2A power supply, directly connect the F1 and the laptop with Type-C cable.
-
Option 2: If your laptop has one Type-C port (full function port), and your laptop Type-C outlet cannot provide more than 5V/2A power supply or the display has no signal/the signal is unstable after connection, then you need to connect an external 5V/2A adapter to power F1. Then connect the F1 to the laptop with a Type-C cable.
Connect to F1 through the Type-C interface of the notebook
Connect F1 to your laptop through F1’s Type-C and MINI HDMI port, following the options below: -
Solution 3: If your laptop does not have a Type-C port, you can use an HDMI-mini HDMI cable to connect the F1 screen to the HDMI port of the laptop, and then connect the 5V/2A adapter to power F1 Screen.
-
-
Connect F1 with Mobile Phone
-
Connect F1 with Other Devices
Connect the F1 to the desk-top computer host, switch, mini PC, or set-top box (the screen needs an external power supply
-
Disassemble the Screen
- Step 1: Push up the screen in the direction shown in the figure
- Step 2: Pull the screen out from the buckle of the hinge according to the direction shown in the figure
-
Storage of the F1
- Rotate the support rod clockwise 90 degrees in a horizontal direction for storage
- Be careful not to scratch the screen when rotating the spindle supporting the screen
Note: Pay attention to the storage order of the left screen and the right screen to avoid damaging the screen.
Audio Settings
Switch settings windows 10 / Windows 11 computer end output
- Right-click the loudspeaker icon down-right
- Select “switch on sound ” in pop-up dialog box
- Left click “turn on sound settings” and pop-up the box as provided,Here users can set about sound;
Here users can set about sound
- Master volume;
- Select output device: ( F1-R / Speaker );
- Device attributes.
Settings of MACOS Computer End Sound
- Choose Apple menu > System Settings
- Click “Output”, then select the device you want to use in the list of sound output devices ：( F1 / Speaker )
Display Settings for Windows 10/Windows 11/MacOS
Windows 10 / Windows 11 Display Settings
- Right-click a blank area of the desktop. Select ‘Display Settings’ from the pop-up dialogue box. Left-click “Display Settings” to open the settings dialogue box, as shown.
- Under the “Rearrange displays” section, drag and drop each display to rearrange them according to their physical layout on your desktop. Scroll down to the bottom of the page to further configure the display for extended or mirrored mode.
Note: When installing vertically, it is necessary to set the display direction to rotate 270 degrees in the computer’s display settings.
MacOS 13 Ventura Display Settings
- Enter the “System Preferences” menu
- Configure your monitor
- Arrange Displays
To rearrange displays, drag them to the desired position.
To mirror displays, hold Option key while dragging them on top of each other.
To relocate the menu bar, drag it to a different display.
In this menu, you can set the resolution and mirror/expand the display you want.
Note: When installing vertically,
it is necessary to set the display direction to rotate 270 degrees in the
computer’s display settings.
OSD Settings
Button Operation Guide
| Classification | Key Function | Remark |
|---|
Before entering the menu
| Click to enter the menu interface| /
Press and hold for 3 seconds to turn off the screen| /
Toggle up to increase volume| “+”
Scroll down to decrease the volume| “-”
After entering the menu
| Click to enter the corresponding column| Confirm
Long press for 2 seconds to exit the selected screen| Return
Scroll up/down to select the corresponding column| Choose
Transportation, Storage, and Use Requirements
To ensure the long-term use of this product and prevent accidental occurrences such as an electric shock, fire, etc.., please read all usage requirements and operating procedures before using this product and comply with the following requirements:
- Please use the original cable.
- Remove the protective film on the surface of the screens before use.
- The power input required by this product is 5V-20V +/-2V,and it required sustained operating power is ≥10W.(If the power supply provided by the laptops is not within this range, please use an external power supply.)
- Do not squeeze or apply exceeding force to the surface of the screens.
- Avoid using sharp objects on the screen surface.
- Avoid excessive humidity and dust build-up to avoid any sort of failure, causing circuit corrosion.
- This product is suitable for general commercial and household use in an optimal temperature environment between -20℃and 60℃.
- Disconnect any power cables when the device is not in use.
- The maximum folding angle of the F1 is 360 degrees. When at the maximum angle, the screen should not be further bent or squeezed to avoid damage.
www.maxfree.com
— www.maxfreeofficial.com —
The manufacturer reserves the right to make changes to the product and update
this manual at any time.
Any questions, please contact:
support@maxfree.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>