NOVA RICO M1 Safari 25cm World Map Instructions

NOVA RICO M1 Safari 25cm World Map

SAFETY INSTRUCTIONS

For educational use. Suitable for indoor use only. Content: illuminated globe (bulb included) with meridian and base. Instructions leaflet. Magnifier included, if expected.

• The illuminated globe is not a toy. Children should use it only under adult supervision.
• The illuminated globe is an electrical appliance if placed on raised surfaces, make sure it is stable to avoid slipping or falling.
• A damaged cable should only be replaced by the manufacturer or a qualified electrician.
• If after unpacking and connecting, the light does not work, make sure the bulb is screwed in tightly.
• Never remove the plug from the socket by pulling on the cord.
• Do not hang or drape anything on the globe.
• Keep these instructions for future reference

CLEANING AND CARING FOR YOUR GLOBE

Firstly, unplug your globe and allow it to cool down. Clean the surfaces by using a damp cloth. Use water only, never use alcohol or other cleaning solvents which would permanently damage the surfaces. Do not expose to direct sunlight.

INSTRUCTIONS FOR ASSEMBLING THE GLOBE

Screw in the lower part of the arc to the base (see picture A) by turning the base. (See picture B).

If the globe is equipped with a plastic meridian and wooden base, please, insert the screw from below through the wooden base and the conical spacer and screw it on to the thread of the meridian.

INSTRUCTIONS FOR CHANGING THE BULB

CAUTION! The illuminated globe is supplied with a light source that can be replaced by the end user. If bulb needs replacing, always use the correct bulb size: type E14, max 18W, 220-240V ~ 50/60 Hz.

• Disconnect the globe from the electric supply and wait a few minutes for the bulb to cool down.
• If the globe has a metal Meridian: Remove the plastic pin according to figures M1 to M3 (possibly with the aid of a small screwdriver). Remove the ball, as can be seen in the figures M4 and M5.

• Caution: Be careful not to scratch the meridian on the globe.

• If the globe has a plastic Meridian: Carefully pull up the meridian arc until the axle comes out of the globe. (See picture 1).Hold the meridian arc up and push the globe forward. ( See picture 2, arrow direction 2). Now lift out the globe from the lamp base ( see picture 2, arrow direction 3).
  
  
  

• Be careful not to scratch the globe with the meridian.

• Now you can change the light bulb according to Fig. M6.
  

• Replace the ball again following the illustrations in reverse order.

• This product contains a light source of energy efficiency class F.

REPLACING FUSE – Applicable for globes equipped with UK plug only

This plug is fitted with a 3° fuse. In the event of the fuse failing it should only be replaced by a 3A fuse that complies with BS1363.
The wires in the main lead are coloured in accordance with the following code:
Blue = Neutral & Brown = Live
The wires should be connected to the plug terminals as follows:
Blue – Neutral or black or blue
Brown = Live or red or brown
Do not connect either wire to the earth terminal.

DISPOSAL OF WASTE EQUIPMENT BY USERS IN PRIVATE HOUSEHOLDS IN THE
EUROPEAN UNION – This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to recycle this product by handing this equipment to a designated collection point for the recycling of waste electrical and electronic equipment. The separate recycling of the equipment at the time of its disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local council or the shop where you purchased the product.

Product compliant with European safety directives.

UK Conformity Assessed (UKCA) indicates conformity with the applicable requirements for products sold within Great Britain.

Double Insulation.

According to legal regulations, not suitable for children under 14 years.

Customer Support

TECNODIDATTICA S.P.A.
Via Garibaldi, 67 – 16040 San Colombano C. GE – Italy
info@tecnodidattica.it – www.tecnodidattica.it
info@novarico.com – www.novarico.com

References

• Tecnodidattica spa :: Mappamondi :: Globi Geografici - Tecnodidattica
• Tecnodidattica spa :: Mappamondi :: Globi Geografici - Tecnodidattica

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>