hama 00083180 Audio Converter AC80 Instruction Manual
- June 6, 2024
- Hama
Table of Contents
00083180
„AC80”
Audio Converter
Audio-Konverter
Operating Instructions
|
---|---
Thank you for choosing aHama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you
sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates product parts energized with a dangerous voltage of
sufficient magnitude to constitute a risk of electric shock.
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package Contents
- ‘AC80’ audio converter
- These operating instructions
Safety Notes
- The product is intended for private, non-commercial use only.
- Protect the product from dirt, moisture, and overheating, and only use it in a dry environment.
- Keep this product, like all electrical products, out of the reach of children!
- Use the product for its intended purpose only.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Do not operate the product outside the power limits given in the specifications.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not use the product in moist environments and avoid
- Do not drop the product and do not expose it to any major
- Do not modify the product in any way. Doing so voids the
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately according to locally applicable regulations.
Risk of electric shock
- Do not open the device or continue to operate it if it becomes damaged.
- Do not use the product if the AC adapter, the adapter cable, or the main cable are damaged.
- Do not attempt to service or repair the product yourself.
Leave any and all service work to qualified experts.
Introduction
The audio converter is an ideal expansion for TVs, home cinemas, and game
consoles. Frequently, these devices do not have all of the connections that
are required. Most often, there is digital audio output for connecting to a
surround sound system. However, if you want to connect to a standard stereo
system or active speakers, the required connections are often not available.
The audio converter lets you tap into the digital sound output using the
coaxial output or the optical output. The device converts the digital sound
and then outputs it to an analogue stereo sound output (2 RCA).
The converter is suitable for digital sound signals at sampling rates up to 96
kHz and resolutions up to 24 bits, and can thus be used in almost any
situation.
Getting started and operation
Note
- Always refer to the operating instructions for all the devices you are connecting.
- Lay all cables so that they do not pose a tripping hazard.
- Do not bend or crush the cable.
Before installation, ensure that all devices to be connected are switched off.
- Connect Toslink cable (not included) to the ‘Toslink’ audio input (1) or an RCA cable (not included) to the ‘Coaxial’ audio input (2) and to your playback device (for example, TV,Blu-ray player, game console).
- Now connect another RCA cable (2 RCA–2RCA, not included) to the ‘R/L’audio output (5) and to your audio device (for example, amplifier, active speaker).
Note
The white RCAplug connects to the LEFT audio output, the red RCA plug to the
RIGHT audio output.
Warning
- Connect the product only to a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
- Disconnect the product from the network using the power button –if this is not available, unplug the power cord from the socket.
- When using a multi-socket power strip, make sure that the sum power draw of all the connected devices does not exceed its maximum throughput rating.
- If you will not be using the product for a long period of time, disconnect it from the mains power.
- Connect the connecting cable of the power supply unit to the 5V DC connection (4).
- Now connect the power supply unit to an easily accessible outlet. The power LED (3) lights up red.
Care and Maintenance
Note
Disconnect the device from the power supply before cleaning it or if it is not
going to be used for a long period of time.
- Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
- Make sure that water does not get into the product.
Warranty Disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper
use of the product or from failure to observe the operating instructions
and/or safety notes.
Technical Data
| Digital input | RCAorToslink (optical) |
|---|---|
| Analog output | 2xRCA(R/L) |
| Sampling rate | 32, 44.1, 48, 96 kHz |
| Power supply | 5V DC 100 mA |
Specifications in accordance with Regulation (EU) 2019/1782
Manufacturer’sname or trademark, commercial registration number, and address|
Hama, HRA12159, Dresdner Str. 9, 86653 Monheim
---|---
Model identifier| FJ-SW126K0501000DE
Input voltage| 100 –240V
Input AC frequency| 50 /60Hz
Output voltage /Output current /
Output power| 5.0 VDC/ 1.0 A/ 5.0 W
Average active efficiency| 73.6 %
Efficiency at low load (10 %)| 62.9 %
No-load power consumption| 0.1 W
Recycling Information
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers areobliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices/batteries, you are making an important contribution to protecting our environment.
Hama GmbH &CoKG
86652 Monheim /Germany
**Service &Support
www.hama.com
+49 9091 502-0
**
www.hama.com/nep
Alllistedbrandsare trademarks of the corresponding companies. Errors and
omissions excepted,
and subjecttotechnical changes. Our general terms of delivery and payment are
applied.
00083180/07.21