Pyle PCO885 PDU Surge Protector User Guide
- June 15, 2024
- Pyle
Table of Contents
Pyle PCO885 PDU Surge Protector
This unit was developed using the expertise of professional sound engineers and working musicians. You will find your new unit has superior performance and greater flexibility than any other power conditioner in its price range. READ THIS MANUAL CAREFULLY TO GET THE MOST OUT OF YOUR NEW UNIT.
Features
For advanced RF/EMI noise filtering and the quietest operation of your equipment..
- Triple Mode Varistor Surge And Spike Protection
- 4 Front and 16 Rear Outlets (With Room For 4 ” Wall Warts”)
- 15 Amp Rating With Rear Panel Circuit Breaker (UL)
- Rugged Single Rack Space Metal Housing For Maximum Reliability
CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN
- ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
- CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
- An equilateral triangle enclosing a lightning flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock.
- An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed with this unit.
WARNING
This product can expose you to a chemical or group of chemicals, which may include ”Nickel Carbonate” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.
IMPORTANT SAFETY INSTRUCTIONS
WARNING! When using electric products, basic precautions should always be followed, including the following:
- Read all the instructions before using the product.
- DO NOT use this product near water (e.g. near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.).
- This product should be used only with a cart or stand that will keep it level and stable and prevent wobbling.
- This product, in combination with amplifiers, headphones, or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist.
- The product should be located so that its location or position does not interfere with its proper ventilation.
- The product should be located away from heat sources such as radiators, heat vents, or other devices (including amplifiers) that produce heat.
- The product should be connected to a power supply only of the type described in the operating instructions or as marked on the product.
- The power supply cord should:
- Be undamaged
- Never share an outlet or extension cord with other devices so that the outlet’s extension on the cord’s power rating is exceeded.
- Be left plugged into the outlet when left unused for a long period of time.
- Care should be taken so that objects do not fall into, and liquids are not spilled through, the enclosure’s openings.
- The products should be serviced by qualified service personnel when:
- The power supply cord or the plug has been damaged.
- Objects have fallen into, or liquid has been spilled onto the product.
- The product has been exposed to rain.
- The product does not appear to operate normally or exhibit a marked change in performance.
- The product has been dropped, or the enclosure damaged.
- Do not attempt to service the product beyond what is described in the user-maintenance instructions. All other servicing should be referred to a qualified service personnel.
- Do not defeat the safety purpose of the grounding-type plug, which features a third grounding prong. If this provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
FRONT AND BACK PANEL
- POWER SWITCH: Outlet switch activates protection and filtration to all outlets. To turn the unit ON or OFF, press the upper or lower portion of this button.
- Voltage LED Digital Screen
- Dual USB Charge (5V/2A): Charge for Mobile-phone
- 4 FRONT PANEL OUTLETS
- 16 REAR PANEL OUTLETS: EMI/RFI Filtered, spike/surge protected, and switched.
- CIRCUIT BREAKER: Resettable 15 Amp thermal circuit breaker.
- POWER CORD: Heavy duty 14-gauge power cord for connection to the AC Power Mains (115V/60Hz).
INSTALLATION AND OPERATION
- The Power Conditioners are the perfect accessories for any rack mount system. Install in the top slot of a standard 19-inch rack, and the 4 Front and16 switched AC outlets on the rear panel will provide full safety protection to all your rack equipment. These conditioners protect your delicate electronic equipment by combining a high-voltage varistor surge and transient suppressor with an RFI/EMI interference filter. The filter helps prevent noise from fluorescent lights, motors, and similar sources of “electronic pollution” from contaminating the AC feed to your sensitive video, audio, VTR, or computer circuits.
- Plug Power Cord (7) into a standard grounded 120V outlet.
- Plug sensitive electronic equipment into the 8 Rear Panel Outlets (4)
- Turn the Outlet Power Switch (1) to the “ON” position. Lit LED indicates conditioned power to the connected equipment.
- MAXIMUM LOAD: The Power Conditioner 4 Front and 16 Rear Panel Outlets are rated at 15 amps total load (or 3600W at 120VAC). If this maximum load is exceeded, the Circuit Breaker will trip, cutting off power to all connected equipment in your rack. If this happens, reduce the load by unplugging one or more units from the power conditioner, and push the circuit breaker to reset it.
FEATURES
- Triple Mode Varistor Surge And Spike Protection
- 16 Rear Outlets (With Room For 4 ” Wall Warts”) Controlled By A Front Panel Switch
- 4 Front Outlets
- 2 USB Front Outlets (5V x 2A)
- Digital Voltage Display Screen
- 15 Amp Rating With Rear Panel Circuit Breaker (UL)
- Rugged Single Rack Space Metal Housing For Maximum Reliability
- Eliminates Unwanted Radio Frequency Interference (RFI) and Electromagnetic Interference (EMI)
- Overload and Surge Protection
- 2U Rack Mountable
- Steel Front Panel and Chassis
- Push to Reset
WHAT’S IN THE BOX:
- 20-Outlet Rack Mount Power Conditioner
TECHNICAL SPECS:
- Power Supply: 120V/60Hz, UL Standard Socket
- Construction Material: Iron
- 6.56 Foot Power Cord
- Peak Impulse Current: 1500 Amps
- Product Dimensions (L x W x H): 48X18.5X9 cm 19” x 7.28” x 3.54” -inches
Questions? Issues?
We are here to help!
- Phone: (1) 718-535-1800
- Email: support@pyleusa.com
FREQUENTLY ASKED QUESTIONS
What brand manufactures the Pyle PCO885 PDU Surge Protector, and what color is it available in?
The Pyle PCO885 PDU Surge Protector is manufactured by Pyle, and it is available in black.
How many total power outlets does the Pyle PCO885 PDU Surge Protector feature, and what is its voltage rating?
The Pyle PCO885 PDU Surge Protector has 20 outlets in total, and it is rated for 120 Volts.
What are the dimensions of the Pyle PCO885 PDU Surge Protector, including its length and width?
The dimensions of the Pyle PCO885 PDU Surge Protector are 19 inches in length and 7.28 inches in width.
What is the weight of the Pyle PCO885 PDU Surge Protector?
The Pyle PCO885 PDU Surge Protector weighs 8.36 pounds.
What is the item model number of the Pyle PCO885 PDU Surge Protector?
The item model number of the Pyle PCO885 PDU Surge Protector is PCO885.
What type of surge protection does the Pyle PCO885 PDU Surge Protector feature, and what does it protect against?
The Pyle PCO885 PDU Surge Protector features triple mode varistor surge and spike protection, protecting equipment when voltage fluctuates, swells, or spikes during storms and power outages.
How many rear and front outlets does the Pyle PCO885 PDU Surge Protector have, and does it include USB outlets?
The Pyle PCO885 PDU Surge Protector has 16 rear and 4 front outlets, along with 2 USB front outlets (5V x 2A).
Is there a master power switch on the Pyle PCO885 PDU Surge Protector, and what is its purpose?
Yes, the Pyle PCO885 PDU Surge Protector includes a master power switch that allows you to completely shut off electronics when not in use for power/energy saving.
How does the Pyle PCO885 PDU Surge Protector eliminate unwanted noise, and what types of interference does it address?
The Pyle PCO885 PDU Surge Protector features built-in AC noise filters that eliminate unwanted radio frequency (RFI) and electromagnetic interference (EMI), improving equipment stability and prolonging the service life of electronics.
Is the Pyle PCO885 PDU Surge Protector designed for rack-mount installation, and what is the rack height?
Yes, the Pyle PCO885 PDU Surge Protector is designed for 2U rackmount installation, providing hassle-free cable management and a neat look to your work station.
What materials are used in the construction of the Pyle PCO885 PDU Surge Protector, ensuring its durability?
The Pyle PCO885 PDU Surge Protector is made with a sturdy steel front panel and chassis, ensuring durability.
How long is the power cord of the Pyle PCO885 PDU Surge Protector, and what is its gauge?
The power cord of the Pyle PCO885 PDU Surge Protector is 6.56 feet long, and the gauge information is not provided in the given data.
Can the Pyle PCO885 PDU Surge Protector withstand light tugging, and what is its purpose in converting AC outlets into a mini-charging station?
Yes, the Pyle PCO885 PDU Surge Protector can withstand light tugging. It is designed to convert any standard AC outlet into a mini-charging station for smartphones/laptops with bulky chargers.
What is the purpose of the USB outlets on the Pyle PCO885 PDU Surge Protector, and what is their power output?
The USB outlets on the Pyle PCO885 PDU Surge Protector serve for charging devices, and each USB outlet has a power output of 5V x 2A.
Does the Pyle PCO885 PDU Surge Protector come with any warranty or replacement policy?
Information about warranty or replacement policies for the Pyle PCO885 PDU Surge Protector is not provided in the given data. It's recommended to check the product documentation or contact the manufacturer for this information.
DOWNLOAD THE PDF LINK:Pyle PCO885 PDU Surge Protector User Guide
REFERENCE:Pyle PCO885 PDU Surge Protector User Guide- Device.Report