JRready ST6112 2 Pin Gray Waterproof Electrical Wire Connector

Product Overview

JRready’s DT/DTM/DTP Series connectors encompass a wide range of products serving a variety of industries. With applications in Heavy Duty, Transportation, Marine, Diagnostic, Military, Alternative Energy and Agricultural industries, as well as spanning the gap between controlled to harsh environmental conditions, our DT/DTM/DTP Series connectors keep you connected with confidence. Although our products provide the best economic alternatives for today’s standard connector market, it is through our continuous efforts to improve the standard products that truly demonstrate our innovative product design.

Product Material

Stamped：Phosphor bronze； Finish：Tin/Nickel-plated

DT/DTM/DTP Series Part Numbering Sequence

JRready DT Family Comparison

DTM Series

The DTM Series connectors is built for use with lower amperages. They work with size 20 contacts, which are 16-22AWG wires, and offer 7.5A(Max) current capacity. A great way to remember these is that the“M” in DTM means “mini”. The mini connectors handle lower amperages.

DT Series

The DT Series connectors is designed for use with size 16 contacts, which are 20-14 AWG wires, and offer 13A(Max) current capacity. These are the most commonly used line in the DT series of environmentally sealed connectors. Their durable housing is built to handle the toughest environmental conditions making them a solid choice for a range of applications.

DTP Series

Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin, inexpensive connectors. The series meets the same specifications as the DTM and DT but offers the designer the ability to use multiple 12 gauge contacts, each with a 25A(Max) current capacity.

Product Preview

| | |
Contact Size| Size 20(7.5 amps Max)| Size 16(13 amps Max)| Size 12(25 amps Max)
Wire Range| 16-22 AWG| 14-20 AWG| 12-16 AWG
Recommended Wire Insulation Diameter| 1.35mm-3.05mm| 2.23mm-3.68mm| 3.40mm-4.32mm

Current Capacity

|

16AWG[1.00mm²]: 7.5 A

18AWG[0.75mm²]: 7.5 A

20AWG[0.50mm²]: 7.5 A

22AWG[0.35mm²]: 5 A

|

14AWG[2.00mm²]: 13 A

16AWG[1.00mm²]: 13 A

18AWG[0.75mm²]: 10 A

20AWG[0.50mm²]: 7.5 A

|

12AWG[3.00mm²]: 25 A

14AWG[2.00mm²]: 18 A

16AWG[1.00mm²]: 13 A

Number of Cavities| 2,3,4,6,8 and 12 cavity| 2,3,4,6,8 and 12 cavity| 2 and 4 cavity
Temperature| -40~125°C
Contact Millivolt Drop| 60 mV (solid contact) max;

100 mV (stamped & formed contact) max

Insulation Resistance| 1000 megohms minimum at 25°C
Dielectric Value| 1500 volts AC
Connector Terminal Retention| contacts achieve a minimum pull-out force of 20 lbs| contacts achieve a minimum pull-out force of 25 lbs| contacts achieve a minimum pull-out force of 30 lbs

Connector Retention

|

A mated connector subjected to a pulling force by the exiting wire bundle at 20 lbs. times the number of contacts to a maximum of 80 lbs. applying load for 30 seconds

|

A mated connector subjected to a pulling force by the exiting wire bundle at 25 lbs.

times the number of contacts to a maximum of 100 lbs. applying load for 30 seconds

|

A mated connector subjected to a pulling force by the exiting wire bundle at 30 lbs.

times the number of contacts to a maximum of 120 lbs. applying load for 30 seconds

Waterproof IP Ratings| IP67

Durability

| No electrical or mechanical defects after 100 cycles of engagement and disengagement.
Compatibility| Compatible with existing standard products industry-wide

JRready DT Series Connector

JRready DT Series connectors are compatible with other existing standard products industry-wide.

Features & Benefits

Current Capacity

| Nominal Voltage Architecture (V): 12, 24, 48 Current (Amp)

16-14 AWG [1.0-2.00mm²]: 13 A

18 AWG [0.75mm²]: 10 A

20 AWG [0.50mm²]: 7.5 A

Wire Range| Size 16 contacts will accept wire ranges of 14 thru 20AWG
Temperature| Operating temperature range: -40°C to +125°C at rated current
Dielectric Value| Meets or exceeds 1500 volts minimum
Connector Terminal Retention| When subjected to a direct pull, contacts achieve a minimum pull-out force of 25 lbs.
Connector Retention| A mated connector subjected to a pulling force by the exiting wire bundle at 25 lbs.

times the number of contacts to a maximum of 100 lbs. applying load for 30 seconds

Mating Cycle Durability

| Following 100 cycles of connection engagement and disengagement, degradation

either mechanical or electrical is not evident

Contact Millivolt Drop| Size 16 contacts with 16AWG conductor – 100 mV drop max at 13A test current
Waterproof IP Ratings| IP67

DT SERIES ORDERING INFORMATION

Plugs 、Receptacles and Wedges

JRready DTM Series Connector

JRready DTM Series connectors are compatible with other existing standard products industry-wide.

Features & Benefits

Current Capacity

| Nominal Voltage Architecture (V): 12, 24, 48 Current (Amp)

16AWG [1.0-1.5mm²]: 7.5 A

18 AWG [0.75mm²]: 7.5 A

20 AWG [0.50mm²]: 7.5 A

22 AWG [0.35mm²]: 5 A

Wire Range| Size 20 contacts will accept wire ranges of 16 thru 22AWG
Temperature| Operating temperature range: -40°C to +125°C at rated current
Dielectric Value| Meets or exceeds 1500 volts minimum
Connector Terminal Retention| When subjected to a direct pull, contacts achieve a minimum pull-out force of 20 lbs.
Connector Retention| A mated connector subjected to a pulling force by the exiting wire bundle at 20 lbs.

times the number of contacts to a maximum of 80 lbs. applying load for 30 seconds

Mating Cycle Durability

| Following 100 cycles of connection engagement and disengagement, degradation

either mechanical or electrical is not evident

Contact Millivolt Drop| Size 20 contacts with 20AWG conductor – 100 mV drop max at 7.5A test current
Waterproof IP Ratings| IP67

DTM SERIES ORDERING INFORMATION

Plugs 、Receptacles and Wedges

JRready DTP Series Connector

JRready DTP Series connectors are compatible with other existing standard products industry-wide.

Features & Benefits

Current Capacity

| Nominal Voltage Architecture (V): 12, 24, 48 Current (Amp)

12AWG [3.0mm²]: 25 A

14 AWG [2.0mm²]: 18 A

16 AWG [1.0mm²]: 13 A

Wire Range| Size 12 contacts will accept wire ranges of 12 thru 16AWG
Temperature| Operating temperature range: -40°C to +125°C at rated current
Dielectric Value| Meets or exceeds 1500 volts minimum
Connector Terminal Retention| When subjected to a direct pull, contacts achieve a minimum pull-out force of 30 lbs.
Connector Retention| A mated connector subjected to a pulling force by the exiting wire bundle at 30 lbs.

times the number of contacts to a maximum of 120 lbs. applying load for 30 seconds

Mating Cycle Durability

| Following 100 cycles of connection engagement and disengagement, degradation

either mechanical or electrical is not evident

Contact Millivolt Drop| Size 12 contacts with 12AWG conductor – 100 mV drop max at 25A test current
Waterproof IP Ratings| IP67

DTP SERIES ORDERING INFORMATION

Plugs 、Receptacles and Wedges

NOTE: Wedgelocks are required for all plug and receptacles

JRready DT/DTM/DTP Standard Contact Information

JRready offers two types of contacts for use in our products: Solid and Stamped & Formed. Both types of contacts utilize the simple crimp-style termination,requiring no solder usage.

Standard Contacts – Solid Sockets & Pins

Standard Contacts – Stamped & Formed Sockets & Pins

JRready DT Connector Kit

Wedge Lock&Contact Remove and install schedule

JRready DT Family Accessories&Tools 1/2

12/#16/#20 Solide Contacts

Crimp Wire Range：12-22AWG Advantage：Long Lever design, labor-saving

| NEW-DT2| 4-indent Hand Crimp Tool, Suitable for crimping Deutsch #12/#16/#20 Solide Contacts

Crimp Wire Range：12-22AWG

Advantage：Same as JRD-HDT-48

Multicolour oxidation color

****| ACT-M202| 4-indent Minitype Hand Crimp Tool, Suitable for crimping Deutsch #12/#16/#20 Solide Contacts

Crimp Wire Range：12-22AWG

Advantage： Miniaturization design, portable

Recommend crimping #16 , #20 Contacts

****| NEW-DT1| 4-indent Minitype Hand Crimp Tool, Suitable for crimping Deutsch #12/#16/#20 Solide Contacts

Crimp Wire Range：12-22AWG

Advantage： Same as ACT-M202 Multicolor oxidation color

Recommend crimping #16 , #20 Contacts

****| YJQ-W2DTQ| Pneumatic 4-indent Crimp tool, Suitable for crimping Deutsch #12/#16/#20 Solide Contacts Crimp Wire Range：12-22AWG

Advantage： Work faster and more efficient

| ACT-LY-20DT ACT-LY-16DT ACT-LY-12DT| ACT-LY-20DT

DT 20# Stamping Terminal Hand Crimping Pliers, Suitable for wire diameter range of 20-16AWG

ACT-LY-16DT

DT 16# Stamping Terminal Hand Crimping Pliers, Suitable for wire diameter range of 18-14AWG

ACT-LY-12DT

DT 12# Stamping Terminal Hand Crimping Pliers, Suitable

for wire diameter range of 14-12AWG

JRready DT Family Accessories&Tools 2/2

(Suite for DT,DTM,DTP,DTV,DRB,DRCP and STRIKE

connectors)

| 0411-310-1605| Removal Tool, plastic, Size 16, Suite wire range 18- 16 AWG,Maximum Insulation Diameter 3.4mm
| 0411-291-1405| Removal Tool, plastic, Size 16, Suite wire range 16- 14 AWG,Maximum Insulation Diameter 3.81mm
| 0411-240-2005| Removal Tool, plastic, Size 20, Suite wire range 22- 16 AWG,Maximum Insulation Diameter 2.41mm
| 114010| Removal Tool, plastic Size 12
Sealing Plugs| P/N| Description
---|---|---
| 114017| Use for Contact Size 12#,16#
| 0413-204-2005| Use for Contact Size 20#
NOTE: Open cavities provide pathways for contaminates to enter the connectors.

To maintain seal integrity, any unused cavity must be filled with the appropriate size sealing plug.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>