Coverado F-150 Seat Cover Installation Guide

**Coverado F-150 Seat Cover Installation Guide

**

PACKAGE CONTENTS

FRONT SEAT COVERS

COMPONENTS

• Strap Chuck x 10

• Strap Hook x 4

Rear Seat Covers

Preinstallation Guide

Catalogue

Front seat cover installation tutorial… 2
Rear seat cover installation tutorial……3-6

1. Front seat backrest cover

2. Front seat cushion cover

3. 40% Rear seat backrest cover

*Notice : Please untie all the magic buckles before starting the installation.

Front Seat installation

• Unbutton the top, Put on the seat cover from top to bottom.

• Tuck the excess top edge under the headrest hole, and button up all the buttons.

• Tuck the chucks into the gap between the seat and backrest

• Put the headrest cover on, attach the back strap to the front back, Then attach the long part of the front headrest cover to the back along the strap

• Position the cushion cover as shown, Tuck the chucks into the gap, Drag the hooks to the bottom and hang them on the pole under the seat.

• Come behind the front seat, Tuck the two chucks (cushion cover) into the reserved elastic band (backrest cover).

• Press the button at the connection to remove the headrest.

• Place the 40% backrest cover as shown in the picture, and tuck the chucks into the gaps..

• Put down the 40% backrest and put the seat cover on.

• Pull the straps on both sides to the middle and fasten the buckles as shown.

• Lift the backrest, and adjust the seat cover to a suitable position.

• Put the headrest back and put on the headrest cover.

• Put on the cushion covers as shown and tuck the strap into the gap.

• Raise the 40% seat and drag out the strap from the gap.

• Fasten the two straps from bottom to top through the straps on each side.

• Finished Display

• Put down the seat.

• Adjust the edges

• Press the button at the connection to remove the headrests.

• Place the 60% backrest cover as shown in the picture, and tuck the buckles into the gaps.

• Put down the 60% backrest and put the seat cover on

• Fasten the buckles and straps as shown.

• Lift the backrest, adjust the seat cover to a suitable position and expose the headrest holes.

• Put the headrests back and put on the headrest covers.

• Put on the cushion covers as shown and tuck the straps into the gap.

• Raise the 60% seat and drag out the strap from the gap.

• Fasten the straps and buckles from bottom to top. 1 and 4 need to go through the side straps.

• Finished Display

• Put down the seat.

• Adjust the edges

Appendix
Our products come in two batches. They are all good but there’s a little difference in rear seat installation. Here is a comparison of the two installation methods.

40% Rear Seat Cover
60% Rear Seat Cover


Scan the QR code to enter youth to view the installation video tutorial

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>