MONIMOTO MONIMOTO9U Motorcycle Tracker User Manual

MONIMOTO MONIMOTO9U Motorcycle Tracker

Product Information

Specifications

• Compatibility: iOS 9.3 or Android 5.0 devices and all subsequent operating systems
• Charging Port: USB-C
• Minimum OS Requirements for App: iOS 14 and Android 8

What’s in the Box:

• 1 X MONIMOTO9U
• 1 X KEY FOB

Getting Started:

Step 1
Charging your MONIMOTO9U Battery for the first time:

1. Get a USB-C charging cable and adapter (not provided with MONIMOTO9U)
2. Remove MONIMOTO9U from the packaging
3. Find the USB-C charging port located on the end of MONIMOTO9U
4. Plug your USB-C charging cable into the charging port
5. Wait till LED’s indicate full battery
6. After MONIMOTO9U is fully charged, remove the cable, and proceed with the setup

Step 2
Installing and Setting Up the Monimoto App:

• Search Monimoto in App Store or Google Play Store to download and install the Monimoto App on your smartphone. Minimum OS requirements are iOS 14 and Android 8.
• Run the Monimoto App and follow the on-screen step-by-step instructions that will guide you through the setup process. Android users, please make sure that both Bluetooth and location services are turned on.
• IMPORTANT : All the pairings are done only through the app. Do not try to pair your MONIMOTO9U device or the key fob directly through your Phone’s Bluetooth Settings, otherwise, the App will be unable to pair.
• Once the setup process has been completed, you should receive an SMS from your device. Be sure to add that number to your contacts with an appropriate name so you recognize it immediately in case of an alarm.

Product Usage Instructions

How MONIMOTO9U Works:
MONIMOTO9U has 2 main modes – Ready Mode and Alarm Mode.

Ready Mode:

• Moving your protected belongings: Push Call notification – YES
• Is the Key nearby? – NO
• Wake up

IMPORTANT : The App uses internet connections as its primary way to communicate with the device, so it’s highly recommended to keep mobile data or Wi-Fi turned ON on your Phone at all times.

Please note that MONIMOTO9U is not a ‘real-time’ tracking device. It does not have a constant connection with the LTE network and is not constantly sending its location. MONIMOTO9U connects to the LTE network and sends locations only when Alarm mode is triggered. This helps to considerably save battery life.

Alarm Mode:
When MONIMOTO9U senses any type of motion, movement, or vibration, the first thing it does is a Key Fob check. If the Key Fob is not found, the device will enter Alarm mode.  Key Fob – ALARM MODE: Push Call notification OWNER – Key more than 10 meters THIEF

FAQ:

• Q: Is MONIMOTO9U a real-time tracking device?
• A: No, MONIMOTO9U is not a real-time tracking device. It connects to the LTE network and sends locations only when Alarm mode is triggered to save battery life.
• Q: How can I contact support for MONIMOTO9U?
• A: You can contact our Support team via the app Help section or send a message to support@monimoto.com

THANK YOU
FOR PURCHASING MONIMOTO9U!
We will do our best to help you secure your property. If you have any issues with your MONIMOTO9U, please contact our Support team via the app Help section or send a message to support@monimoto.com

WHAT’S IN THE BOX

BEFORE YOU START
The device can be used with iOS 9.3 or Android 5.0 devices and all subsequent operating systems.

However, your smartphone must also have Bluetooth 4.0+ (BLE) functionality, as the connection between your phone and MONIMOTO9U uses this technology. In the pictures below you can see MONIMOTO9U packed with LTE, 2G, GPS, Bluetooth, and other smart technology inside. It also contains an eSIM card (chip soldered to the board) and a rechargeable Lithium battery inside.

Additionally, MONIMOTO9U comes with a Key Fob that works on a proximity basis (using Bluetooth) to prevent the tracker from alarming when you move your own belongings. We recommend keeping it with the owner (not anywhere inside or on the bicycle) at all times. Why? If you keep it on your belongings and it gets stolen – the alarm will not start since MONIMOTO9U will see the key fob nearby.

Most users would naturally keep the keyfob with such keys, but we must warn you that if your belongings are stolen along with your keys and keyfob together, then the previously described situation will happen where the tracker is not able to alarm because it detects the nearby keyfob.

That is why we recommend keeping the Key Fob in a jacket, pants pocket, backpack, or bag – somewhere on your person. With that said, if you do decide to keep the keyfob together with any bicycle keys, we highly recommend making sure you always have your keys with you before leaving your belongings unattended

GETTING STARTED

Charging your MONIMOTO9U Battery for the first time.

STEP 1

• Get a USB-C charging cable and adapter (not provided with MONIMOTO9U)
• Remove MONIMOTO9U from the packaging
• Find the USB-C charging port located at the end of MONIMOTO9U
• Plug your USB-C charging cable into the charging port
• Wait till LED indicates full battery
• After MONIMOTO9U is fully charged, remove the cable, and proceed with the setup.

STEP 2

Search “Monimoto” in the App Store or Google Play Store:

• Download the Monimoto App and install it on your smartphone. The minimum OS requirements are iOS 14 and Android 8

• Run the Monimoto App and follow the on-screen step-by-step instructions that will guide you through the setup process. Android users, please make sure that both Bluetooth and location services are turned on.

• IMPORTANT:
  All the pairings are done only through the app. Please do not try to pair your MONIMOTO9U device or the key fob directly through your Phone’s Bluetooth Settings, otherwise the App will be unable to pair.

• Once the setup process has been completed you should receive an SMS from your device. Be sure to add that number to your contacts with an appropriate name so you recognize it immediately in case of an alarm.

HOW MONIMOTO9U WORKS

MONIMOTO9U has 2 main modes – Ready Mode and Alarm Mode.

IMPORTANT:
The App uses internet connections as its primary way to communicate with the device so it’s highly recommended to keep mobile data or Wi-Fi turned ON on your Phone at all times.

Please note that MONIMOTO9U is not a ‘real-time’ tracking device. It does not have a constant connection with the LTE network and is not constantly sending its location. MONIMOTO9U connects to the LTE network and sends locations only when Alarm mode is triggered. This helps to considerably save battery life.

READY (ARMED) MODE
Once you go through the setup wizard and successfully configure your device – you should see a green “READY” sign. This means MONIMOTO9U is ready to detect any type of movement and notify you if the Key Fob is not around. You do not need to activate MONIMOTO9U in any other way.

Moving the belongings

MONIMOTO9U remains in Ready (Armed) mode if the owner has a Key Fob while moving the belongings.

ALARM MODE

When MONIMOTO9U senses any type of motion, movement, or vibration, the first thing it does is a Key Fob check. If the Key Fob is not found, the device will enter Alarm mode.

When in alarm mode MONIMOTO9U first calls the owner’s number. It will call ONCE and after that, you will start receiving push notifications to the MONIMOTO9U app. You will see a GPS location if precise location data is received or an approximate location from LTE network triangulation using Cell ID if GPS is not available.

By default, you will get updates every 5-10 minutes (or every 2-3 minutes if Live Tracking is enabled) in Alarm mode while the movement continues. Once your MONIMOTO9U-equipped belongings have stopped moving you will be updated with the last location after 30 minutes and Alarm mode will be canceled. If movement resumes, the alarm will start again.

THESE TWO TIMELINES ILLUSTRATE HOW MONIMOTO9U BEHAVES TIME-WISE:

EXITING ALARM MODE
There are 4 ways an alarm is canceled and returns MONIMOTO9U back to Ready (Armed) mode:

• Exit Alarm with Key Fob
  Once the Key Fob is detected within the 10m (~30ft) range, MONIMOTO9U will automatically return to Ready mode.

• Deactivate by app
  You can turn off Alarm mode by app only when your phone is within Bluetooth signal range (Maximum 50m / ~150ft in an open area without obstacles). If you open the app, go to the Settings Tab and press “Connect” (establishing Bluetooth connection)– it will return to Ready (Armed) mode and cancel Alarm mode. If there is no motion for 30 minutes MONIMOTO9U cancels the alarm.

• Send to Sleep by App
  Sleep mode can only be activated immediately after an alarm is triggered, and only when the user manually chooses to sleep on the device. You can put MONIMOTO9U to sleep for

• 1- 24 hours using the app
  This action will disarm MONIMOTO9U and you will not be able to bring it back to Ready (Armed) mode until the selected sleep period ends. When the sleep period ends it will return to Ready (Armed) mode automatically, no action is required. This can be useful if you’ve gone for a ride but forgot the Key Fob at home and want to stop receiving alerts and save battery life. Or if you gave your bike to a friend but forgot to give them the Key Fob.

PERIODIC CHECK
MONIMOTO9U regularly performs a battery check and updates the status of your phone. If MONIMOTO9U encounters LTE network issues or batteries are drained and periodic checks cannot be performed you will be notified in the app.
The frequency of periodic checks can be set using the MONIMOTO9U app.

We recommend sticking to the default setting and receiving periodic updates every day. This will assure you the device is working properly and will notify you when the battery is empty. By Default, periodic checks are not set to send a location. That can be adjusted from the Settings menu, however, we do not encourage you to have locations sent with periodic checks since it drains the battery significantly to send location updates.

TESTING AN ALARM ON MONIMOTO9U

1. Leave your Key Fob at home.
2. Switch off Bluetooth on your phone and close the Monimoto Application.
3. Take your MONIMOTO9U-equipped belongings for a test movement.
4. In approx. In 1 minute you should receive a call from MONIMOTO9U and soon after push notifications should arrive to the App.
5. Open the App and check whether it is showing the precise GPS or approximate LTE network-based location.
6. If you received precise GPS locations – use one of the exit alarm mode methods in Section 5.3 to disarm the alarm. Congratulations, your belongings are now safe!
7. If you received an approximate location please re-install your MONIMOTO9U in a different spot on your belongings.
8. Repeat the test movement until you get precise GPS locations.

KEY FOB BATTERY REPLACEMENT

1. Insert a flat screwdriver into the special hole and lift.
2. Separate the two black pieces.
3. Take the piece with the battery.
4. Slide the old battery with your finger to the left side to remove it, then properly dispose of the used battery.
5. Put a new CR2032 battery into the enclosure. The positive (+) side of the battery faces down and the negative (-) side faces up.
6. Slide the new battery to the right side until the battery is in its slot.
7. Realign the two sides and firmly close till you hear a ‘click’ sound.

RESETTING YOUR DEVICE TO DEFAULT PARAMETERS

1. Ensure batteries are inserted into your MONIMOTO9U.
2. Push and hold the reset button for 3 seconds.
3. You will see a few LED blinks followed by one long BLUE LED blink for 3 seconds.

LED INDICATIONS

UPDATING FIRMWARE
If a new firmware is available, you will see a pop-up appear in the App saying “New Firoption to install once you connect to MONIMOTO9U through the Settings section of the app by pressing the Connect button.

TECHNICAL SPECIFICATIONS

• BATTERIES
  MONIMOTO9U: 3.7V Li-Polymer (900mAh) rechargeable
  Key Fob: 3V Lithium CR2032 (1 battery)

• BATTERY OPERATION TIME
  MONIMOTO9U: up to 18 months
  Key Fob: up to 12 months

• MONIMOTO9U SUPPORTED LTE BANDS
  for operation in EU 3, 8, 20
  for operation in the USA 2, 4, 5, 12
  for operation in Japan: 1, 8, 18, 19
  for operation in Australia and New Zealand: 28

• SIM COVERAGE
  EU, UK, USA

• BLUETOOTH VERSION
  LE

• GPS LOCK TIME ASSISTED GPS, ESIM
  Hot start: <2 sec (open sky); Cold start: <45 sec

• SATELLITE NAVIGATION
  BeiDou, Galileo, GLONASS, GPS / QZSS

• INDOOR NAVIGATION
  Wi-Fi Positioning System (WPS) starting from 4.4.0.0 FW version

• DUST AND WATER RESISTANCE RATING
  MONIMOTO9U: IP65
  Key Fob: IP65
  USB
  C-type

• MAX CHARGING INPUT POWER
  5W

• ACCELEROMETER
  3 Axis

• RANGE OF OPERATING TEMPERATURES
  +5°C to +45°C (41°F to 113°F)

• DIMENSIONS
  93x39x13 mm

• DEVICE WEIGHT
  100g

• WARRANTY
  Valid for 2 years from purchase date *The operation time will vary depending on the usage of the device. Each set of batteries should give you up to ~1,000 location pings.

ADDITIONAL INFORMATION

TERMS OF USE
The following terms and conditions govern the use of the MONIMOTO9U device and contain important information on limitations regarding the product’s use and function, as well as information on the limitations of the manufacturer’s liability. Please carefully read these terms and conditions for download, installation, display, and use of the mobile application (“Application”) before you download, install, display, or use the Application.

TECHNICAL SUPPORT
To ensure continuous and proper operation of the MONIMOTO9U device and uninterrupted service, it is the responsibility of the User to make sure that: (i) the product is properly installed, and (ii) there is constant internet or LTE connection and electrical supply (low battery must be replaced in time).

If you experience difficulty during the installation or subsequent use of the system, you may contact the “Monimoto, UAB” distributor or dealer in your country/region. For more information see MONIMOTO.com

SAFETY INSTRUCTIONS
Please read and follow these safety guidelines to maintain the safety of operators and people around:

• DO NOT use the system where it can cause potential danger and interfere with other devices – such as medical devices.
• DO NOT use the system in a hazardous environment.
• DO NOT expose the system to high humidity, chemical environment, or mechanical impact.
•  DO NOT attempt to repair the system yourself – any repairs must be carried out by fully qualified personnel only.
• DO NOT try to disassemble MONIMOTO9U.
• EVER install or carry out maintenance during stormy weather.
• To switch the system off, remove one of the batteries.
• Keep new or used CR2032 batteries (ones that are used in MONIMOTO9U Key Fob out of the reach of children. If a battery is swallowed, it can lead to serious burns resulting in internal bleeding or death.
• Risk of explosion if the battery is replaced by an incorrect type.

WARRANTY PROCEDURES
To obtain warranty service, you may return a defective system to your original point of purchase, or the authorized “Monimoto UAB” dealer or the distributor from which you purchased the MONIMOTO9U product. To request warranty service, the purchaser is required to provide proof of purchase.

MANUFACTURER WARRANTY

“Monimoto UAB” warrants this system only to the original purchaser and only in case of defective workmanship and materials under normal use of the system for twenty-four (24) months from the date of shipment by the “Monimoto UAB” (Warranty Period). Warranty obligations do not cover expandable materials (power elements and/or batteries), holders, and enclosures. The warranty remains valid only if the system is used as intended, following all guidelines outlined in this manual and by the operating conditions specified. The warranty is void if the system has been disassembled or exposed to mechanical impact, chemicals, high humidity, fluids, corrosive and hazardous environments, or force majeure factors.

If a hardware defect arises and a valid claim is received within the Warranty Period, at its discretion, “Monimoto UAB” will either (a) repair a hardware defect at no charge, using new or refurbished replacement parts, or (b) exchange the product with a product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original product, or (c) refund the purchase price of the product.

LIMITED LIABILITY

The buyer must agree that the system will reduce the risk of theft, burglary, or other dangers but does not provide a guarantee against such events. “Monimoto UAB” will not assume any responsibility regarding personal or property, or revenue loss while using the system. “Monimoto UAB” is not affiliated with any of the Internet providers, therefore, it shall not be responsible for the quality of Internet service.

“Monimoto UAB” shall also assume no liability due to direct or indirect damage or loss, as well as unreceived income when using the system, including cases, when the damages arise due to the above-mentioned risks, due to breakdown or malfunction of the user

not being informed promptly about a risk which has arisen. In any case, the liability of “Monimoto UAB”, as much as it is allowed by the laws in force, shall not exceed the price of the acquisition of the product.

CONSUMER PROTECTION LAWS

FOR CONSUMERS WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. This warranty grants upon you specific legal rights, and you may also have other rights that vary by country, state, or province.

DISPOSAL AND RECYCLING INFORMATION

The WEEE (Waste Electrical and Electronic Equipment) symbol on this product (see left) means it must not be disposed of in household waste. To prevent possible harm to human health and/or the environment, you must dispose of this product in an approved and environmentally safe recycling facility. For further information contact your system supplier or your local waste authority. Dispose of used batteries according to the instructions.

FCC compliance information
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Modifications not expressly approved by the manufacturer may void the user’s authority to operate the equipment under FCC rules.

It is strictly forbidden to copy and distribute the information contained in this document or to pass thereof to a third party without an a priori written authorization obtained from “Monimoto UAB” “Monimoto UAB’’ reserves the right to update or modify this document and/or related products without an a priori warning. “Monimoto UAB’’ hereby declares that the smart alarm for bicycles and ebicycles MONIMOTO9U complies with the essential requirements and other relevant provisions of the RED Directive 2014/53/EU. The declaration of conformity is available at MONIMOTO.com.

User Guide v1.00 Copyright © “Monimoto UAB”, 2022. All rights reserved.

References

• The Smart Motorcycle GPS Tracker - Monimoto US

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>