Hunter SRM Gear Drive Instruction Manual
- June 15, 2024
- Hunter
Table of Contents
Hunter SRM Gear Drive
Product Information
Specifications
- Product Name: SRM
- Type: Short-range rotor
- Benefits: Economical, convenient, and efficient alternative to spray heads
User-Installed Options
The SRM offers the following user-installed options:
- Drain Check Valve (up to 2.1 m of elevation) – P/N: 462078SP
SRM Nozzle Performance Data
The SRM nozzle performance data is presented in the table below:
Nozzle| Pressure (bar)| Pressure (kPa)| Radius (m)| Flow| Precipitation
(mm/hr)
---|---|---|---|---|---
Dk. Green| 1.7| 170| 4.3| 0.13| 14
Notes :
All precipitation rates are calculated for 180-degree operation. For the precipitation rate for a 360-degree sprinkler, divide by 2.
Product Usage Instructions
Installation
To install the SRM, follow these steps:
- Select a suitable location for the SRM.
- Ensure the water supply is turned off.
- Dig a hole in the ground that is large enough to accommodate the SRM.
- Place the SRM in the hole, ensuring it is level.
- Connect the water supply pipe to the SRM.
- Turn on the water supply and check for any leaks.
- Adjust the rotation and spray range as needed.
Adjustment
To adjust the rotation and spray range of the SRM, follow these steps:
- Locate the adjustment screw on the top of the SRM.
- Using a screwdriver, turn the adjustment screw clockwise to decrease the spray range or counterclockwise to increase the spray range.
- Observe the changes in the spray pattern and adjust as needed.
Maintenance
To ensure proper functioning of the SRM, regular maintenance is recommended:
- Inspect the SRM for any damage or clogs.
- Clean any debris or dirt that may have accumulated on the nozzle or rotor.
- Check for any leaks or water pressure issues.
- Replace any worn-out or damaged parts as needed.
Frequently Asked Questions (FAQ)
- Q: Can I install multiple SRMs in my irrigation system?
- A: Yes, you can install multiple SRMs in your irrigation system. Simply follow the installation instructions for each SRM and ensure proper spacing between them for optimal coverage.
- Q: Can I use the SRM with a water source that has low pressure?
- A: The SRM is designed to work with a wide range of water pressures. However, it is recommended to check the product specifications to ensure compatibility with your specific water pressure conditions.
- Q: How do I determine the precipitation rate for a 360-degree operation?
- A: To determine the precipitation rate for a 360-degree operation, divide the given precipitation rate by 2.
SRM
The SRM is an economical short-range rotor that offers a convenient and
efficient alternative to spray heads.
KEY BENEFITS
- Adjustable arc from 40° to 360° to keep water in the appropriate areas
- Standard factory-installed 2.0 nozzle speeds installation
- Through-the-top arc adjustment for easy installation
- QuickCheck™ arc mechanism for fast Arc Adjustment
Operating Specifications
- Nozzle choices: 8
- Radius: 4.0 to 10.7 m
- Flow: 0.08 to 1.0 m3/hr; 1.4 to 16.7 l/min
- Recommended pressure range: 1.4 to 7.0 bar; 140 to 700 kPa
- Operating pressure range: 1.4 to 7.0 bar; 140 to 700 kPa
- Precipitation rate: 11 mm/hr approximately
- Nozzle trajectory: 14° approximately
- Warranty period: 1 year
User-Installed Options
Drain Check Valve (up to 2.1 m of elevation) P/N: 462078SP
SRM Nozzle Performance Data
| Nozzle | Pressure | Radius | Flow | Precip mm/hr |
|---|---|---|---|---|
| bar | kPa | m | m³/hr | l/min |
.50 •
Dk. Green
| 1.7| 170| 4.3| 0.08| 1.4| 9| 11
2| 200| 4.3| 0.09| 1.6| 10| 12
2.5| 250| 4.6| 0.11| 1.8| 10| 12
3| 300| 4.6| 0.12| 2| 12| 13
3.5| 350| 4.9| 0.13| 2.2| 11| 13
3.8| 380| 4.9| 0.14| 2.3| 12| 14
.75 •
Dk. Green
| 1.7| 170| 4.3| 0.13| 2.2| 14| 17
---|---|---|---|---|---|---|---
2| 200| 4.6| 0.14| 2.4| 14| 16
2.5| 250| 4.9| 0.16| 2.7| 13| 15
3| 300| 5.2| 0.18| 3| 13| 15
3.5| 350| 5.2| 0.19| 3.2| 14| 17
3.8| 380| 5.5| 0.2| 3.4| 13| 15
1.0 •
Dk. Green
| 1.7| 170| 5.2| 0.18| 3| 13| 15
2| 200| 5.5| 0.19| 3.2| 13| 15
2.5| 250| 5.5| 0.21| 3.5| 14| 16
3| 300| 5.8| 0.23| 3.8| 14| 16
3.5| 350| 5.8| 0.24| 4.1| 15| 17
3.8| 380| 6.1| 0.25| 4.2| 14| 16
1.5 •
Dk. Green
| 1.7| 170| 6.1| 0.27| 4.5| 15| 17
2| 200| 6.4| 0.29| 4.8| 14| 16
2.5| 250| 6.4| 0.32| 5.4| 16| 18
3| 300| 6.7| 0.36| 6| 16| 18
3.5| 350| 6.7| 0.39| 6.4| 17| 20
3.8| 380| 7| 0.4| 6.7| 16| 19
2.0 •
Dk. Green
| 1.7| 170| 7| 0.34| 5.6| 14| 16
2| 200| 7.3| 0.37| 6.2| 14| 16
2.5| 250| 7.3| 0.42| 7.1| 16| 18
3| 300| 7.6| 0.48| 8| 17| 19
3.5| 350| 7.6| 0.53| 8.8| 18| 21
3.8| 380| 7.9| 0.56| 9.3| 18| 20
2.5 •
Dk. Green
| 1.7| 170| 7.9| 0.46| 7.6| 15| 17
2| 200| 8.2| 0.49| 8.1| 14| 17
2.5| 250| 8.2| 0.54| 9| 16| 18
3| 300| 8.5| 0.59| 9.8| 16| 19
3.5| 350| 8.5| 0.63| 10.5| 17| 20
3.8| 380| 8.8| 0.65| 10.9| 17| 19
3.0 •
Dk. Green
| 1.7| 170| 8.8| 0.51| 8.5| 13| 15
2| 200| 9.1| 0.56| 9.3| 13| 15
2.5| 250| 9.1| 0.64| 10.6| 15| 18
3| 300| 9.4| 0.72| 12| 16| 19
3.5| 350| 9.4| 0.78| 13.1| 18| 20
3.8| 380| 9.8| 0.82| 13.7| 17| 20
4.0 •
Dk. Green
| 1.7| 170| 9.8| 0.8| 13.3| 17| 19
2| 200| 10.1| 0.83| 13.8| 16| 19
2.5| 250| 10.1| 0.89| 14.8| 18| 20
3| 300| 10.4| 0.94| 15.7| 17| 20
3.5| 350| 10.4| 0.98| 16.3| 18| 21
3.8| 380| 10.7| 1| 16.7| 18| 20
Notes:
All precipitation rates are calculated for 180-degree operation. For the
precipitation rate for a 360-degree sprinkler, divide by 2.
Copyright © 2023 Hunter Industries™. All rights reserved.
https://www.hunterindustries.com/en-metric/irrigation-product/rotors/srm
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>