AORUS C500 Glass PC Case Installation Guide
- June 3, 2024
- Aorus
Table of Contents
- Assembly Drawing
- Remove the panels
- Install water cooling radiators & cooling fans
- Install the internal 2.5″ SSDs & 3.5″ HDDs
- Install the power supply
- RGB & Fan control system
- Maximum Compatibility and Accessory Kit
- Install the vertical graphics card
- Warranty
- WEEE Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
C500 Glass PC Case
Installation Guide
Assembly Drawing
- I/O panel
- Front panel
- Tempered glass side panel
- Vertical and horizontal graphics card Installation ( PCI-E Riser Cable not included )
- Top panel
- Detachable dust filter
- PSU mounting plate
- 3.572.5″ drive bays
- 2.5″ drive bays
- ARGB & PWM fans (Pre-installed 120mm*4)
Remove the panels
- Be careful when handling the tempered glass panel.
- Install the fans or the radiators without removing the front panel.
Install water cooling radiators & cooling fans
Install the internal 2.5″ SSDs & 3.5″ HDDs
Install the power supply
RGB & Fan control system
RGB FUSION 2.0
With 16.7M customizable color options and numerous lighting effects, you can
choose lighting effects or synchronize with other AORUS devices.
- Please use the included hub (refer the below image) to connect the ARGB and PWM fans.
Maximum Compatibility and Accessory Kit
| Figure | Part’s Name | Qty | Used Fo |
|---|---|---|---|
| Screw A | 5 | PSU (4) | |
| Screw B | 18 | Motherboard (9) / VGA holder kit (2) / PCI Slot Cover (6) | |
| Screw C | 10 | 3.5″ HDD Tray (8) | |
| Screw D | 18 | 2.5″ SSD (16) / VGA holder kit (2) | |
| Standoff 6.5mm | 5 | VGA holder kit (2) / Motherboard(8, pre-installed) | |
| Standoff 16.8m | 2 | VGA holder kit | |
| VGA holder kit | 1 | Vertical VGA installation | |
| Nut setter | 1 | Standoff Installation | |
| Cable Tie | 10 | Cable management | |
| PCI Slot Cover | 6 | PCI Expansion Slot | |
| Shock Absorption Rubber | 10 | 3.5″ HDD Tray (8) |
Install the vertical graphics card
- Provides two ways (A&B) for VGA installation depending on VGA height and mechanism.
- Requires the PCIE riser cable (not included). Plug the PCI-E riser cable before installing the graphics card.
- The Type A holder bracket has been pre-installed in the chassis, which can be removed by unscrewing it for horizontal graphics card installation.
A. Supports up to 8 Slot (<160mm total clearance) Graphics card
B. Supports up to 3.5 Slot (<73mm total clearance) Graphics card
Warranty
Gigabyte provides limited product warranty. For the latest and current terms of the Limited Product Warranty, please visit http://www.gigabyte.com/supportdownloads/customer-service.aspx
WEEE Information
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.
Asia (Headquarters)
GIGA-BYTE TECHNOLOGY CO., LTD. Taiwan
Address: No.6, Baoqgiang Rd., Xindian Dist., New Taipei City 231, Taiwan
Tel: +886-2-8912-4000
http://www.gigabyte.com
China
GIGABYTE CHINA
Address: 24/F, HaiTong Securities Tower, No.689 Guangdong Road, Shanghai,
China
Tel: +86-21-6340-0912
Europe
G.B.T. TECHNOLOGY TRADING GMBH Germany
Address: Bullenkoppel 16, 22047 Hamburg, Deutschland
Tel: +49-40-25 33 040
North America
G.B.T. INC. USA
Address: 17358 Railroad Street, City of Industry, CA91748 USA
Tel: +1-626-854-9338
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>