Beko WUX61032W-IT Washing Machine User’s Manual

Beko WUX61032W-IT Washing Machine

WUX61032W-IT

Document Number=1911861331_EN / 05-08-20.(9:51)

This product was manufactured using the latest technology in environmentally friendly conditions.

General safety instructions

This section includes security instructions that may help prevent injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed.

Life and property safety

• Never place the product on a carpet-covered floor. Electrical parts will get overheated since air cannot circulate from under the device. This will cause problems with your product.
• Unplug the product if it is not in use.
• Always have the installation and repair procedures carried out by the Authorised Service Agent. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
• The water supply and draining hoses must be securely fastened and remain undamaged. Otherwise, a water leak may occur.
• While there is still water inside the product, never open the loading door or remove the filter. Otherwise, risk of flooding and injury from hot water will occur.
• Do not force open the locked loading door. Door can be opened a few minutes after the washing cycle ends. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.
• Use detergents, softeners, and supplements suitable for automatic washing machines only.
• Follow the instructions on the label of textiles and the detergent package.

Children’s safety

• This product can be used by children who are at the age of 8 and over and people whose physical, sensory or mental skills are not fully developed or who do not have the necessary required experience and knowledge as long as they are supervised or trained about the safe use of the product and its risks. Children should not play with the device. Cleaning and maintenance work should not be performed by children unless they are supervised by someone. Children of less than 3 years should be kept away unless continuously supervised.
• Packaging materials may be dangerous for children. Keep packaging materials in a safe place away from the reach of the children.
• Electrical products are dangerous for children. Keep the children away from the product when it is in use. Do not allow them to play with the product. Use child lock to prevent children from intervening with the product.
• Do not forget to close the loading door when leaving the room where the product is located.
• Store all detergents and additives in a safe place away from the reach of the children by closing the cover of the detergent container or sealing the detergent package.

Electrical safety

• If the product has a failure, it should not be operated unless it is repaired by the Authorised Service Agent. Risk of electric shock!
• This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the program, see the “Cancelling the program” section.
• Plug the product into a grounded outlet protected by a 16 A fuse. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding by the local regulations.
• Do not wash the product by spraying or pouring water onto it! Risk of electric shock!
• Never touch the power cable plug with wet hands! Do not grab the power cord to unplug the machine, always unplug it by holding the socket with one hand, and pulling the plug with the other hand.
• The product should be unplugged during installation, maintenance, cleaning, and repair procedures.
• If the power cable is damaged, it must be replaced by the manufacturer, after-sales service, or a similarly qualified person (preferably an electrician) or someone designated by the importer to avoid possible risks.

Hot surface safety

While washing the laundry at high temperatures, the loading door glass will get hot. Considering this fact, during washing operation keep the children away from the loading door of the product to prevent them touching it.

Important instructions for environment

Compliance with the WEEE Directive and Disposing of the Waste Product:

This product complies with the EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

This symbol indicates that this product shall not be disposed of with other household wastes at the end of its service life. Used devices must be returned to an official collection point for recycling of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was purchased. Each household performs an important role in recovering and recycling of old appliances. Appropriate disposal of used appliances helps prevent potential negative consequences for the environment and human health.

Compliance with RoHS Directive

The product you have purchased complies with the EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package information

The packaging materials of the product are manufactured from recyclable materials by our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Intended use

• This product has been designed for domestic use. It is not for commercial purposes or it should not be used out of its intended use.
• The product must only be used for washing and rinsing of laundry that are marked accordingly.
• The manufacturer waives any responsibility arising from incorrect usage or transportation.
• The service life of your product is 10 years. During this period, original spare parts will be available to operate the appliance properly.

Technical specifications

• Available
Electrical input (V/Hz)| 230 V / 50Hz
Total current (A)| 10
Total power (W)| 1550
Main model code| 9213

The model information as stored in the product database can be reached by entering the following website and searching for your model identifier (*) found energy label: https://eprel.ec.europa.eu/

Installation

• Apply to the nearest authorized service agent for the installation of your product.
• Preparation of the location and electrical, tap water, and waste water installations at the place of installation is under the customer’s responsibility.
• Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.
• Make sure that the installation and electrical connections of the product are performed by an authorized service. Manufacturers shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.
• Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

Appropriate Installation Location

• Place the product on a hard and level floor. Do not put it onto a carpet with high pile or other similar surfaces.
• When the washing machine and dryer are placed on top of each other, their total weight –when loaded– amounts to 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!
• Do not place the product on the power cable.
• Do not install the product in environments where the temperature falls below 0 ºC.
• Leaving a gap at the sides of the machine is suggested to reduce vibration and noise
• On a graduated floor, do not place the product next to the edge or on a platform.
• Do not place heat sources such as Hobs, Irons, Ovens, etc. on the washing machine and do not use them on the product.

Removing packaging reinforcement (If the product has)

Tilt the machine backward to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Do not make this operation alone by yourself.

Removing the transportation locks

1. Loosen all bolts with an appropriate wrench until they turn freely.
2. Remove the transport safety bolts by turning them slightly.
3. Insert the plastic covers in the bag containing the user manual to the openings on the rear panel.

CAUTION: Remove the transportation safety bolts before operating the washing machine! Otherwise, the product will be damaged.

• Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.
• Install the transport safety bolts in reverse order of the disassembly procedure.
• Never move the product without the transportation safety bolts properly fixed in place!

Connecting water supply

The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have 10 – 80 litres of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure-reducing valve if the water pressure is higher.

• CAUTION: Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.
• CAUTION: Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.

1. Tighten the nuts of the hose by hand. Never use a tool when tightening the nuts.
2. When the hose connection is completed, check whether there are leak problems at the connection points by opening the taps fully. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leaks and resultant damages, keep the taps closed when you do not use the product.

Connecting the drain hose to the drain

Attach the end of the drain hose directly to the waste water drain, lavatory or bathtub.

CAUTION: Your drain house will be flooded if the hose comes out of its housing during water discharge. Moreover, there is a risk of scalding due to high washing temperatures! To prevent such situations and make sure that the machine performs water intake and discharge processes without any problem, fix the drain hose securely.

• Connect the drain hose to a minimum height of 40 cm and a maximum height of 100 cm.
• In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.
• To prevent the waste water from going back into the machine again and to ensure easy drainage, do not immerse the end of the hose into the wastewater or do not insert it into the drain for more than 15 cm. If it is too long, cut it short.
• The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.
• If the length of the hose is too short, use it by adding an original extension hose. The length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

Adjusting the feet

CAUTION: To ensure that the product operates more silently and vibration- free, it must stand level and balance on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.

CAUTION: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

1. Loosen the lock nuts on the feet by hand.
2. Adjust the feet until the product stands in a stable and balanced way. 3. Tighten all lock nuts by hand again.

Electrical connection

Connect the product to a grounded outlet protected by a 16 A fuse. The Manufacturer shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

• Connection must comply with national regulations.
• The wiring for the electrical outlet circuit must be sufficient to meet the appliance requirements. The use of a Ground Fault Circuit Interrupter (GFCI) is recommended.
• The power cable plug must be within easy reach after installation.
• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.
• The voltage specified in the “Technical specifications” section must be equal to your mains voltage.
• Do not make connections via extension cables or multi-plugs.

CAUTION: Damaged power cables must be replaced by the Authorised Service Agents.

Initial use

Before starting to use the product make sure that the preparations are made which are in line with the “Important Safety and Environment Instructions” and the instructions in the “Installation” section.

• To prepare the product for washing laundry, perform the first operation in the Drum Cleaning programme. If this program is not available on your machine, apply the method which is described in section 4.4.2.
• Use an anti-limescale suitable for the washing machines.
• Some water might have remained in the product due to the quality control processes in the production. It is not harmful to the product.

Preparation

Sorting the laundry

• • Sort laundry according to the type of fabric, color, degree of soiling and allowable water temperature.
• Always obey the instructions given on the garment tags.

Preparing laundry for washing

• Laundry items with metal attachments such as underwired bras, belt buckles or metal buttons will damage the machine. Remove the metal pieces or wash the clothes by putting them in a laundry bag or pillowcase.
• Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out and brush. Such objects may damage the product or cause noise problems.
• Put small-size clothes such as infant socks and nylon stockings in a laundry bag or pillowcase.
• Place curtains in without compressing them. Remove curtain attachment items.
• Fasten zippers, sew loose buttons and mend rips and tears.
• Wash “machine washable” or “hand washable” labelled products only with an appropriate programme.
• Do not wash colours and whites together. New, dark-coloured cottons release a lot of dye. Wash them separately.
• Tough stains must be treated properly before washing. If unsure, check with a dry cleaner.
• Only use the dyes/color changers and descaling agents which are appropriate to machine wash. Always follow the instructions on the package.
• Wash trousers and delicate laundry turned inside out.
• Keep laundry items made of Angora wool in the freezer for a few hours before washing. This will reduce pilling.
• Laundry that is subjected to materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before being placed into the machine. Such dust and powders on the laundry may build up on the inner parts of the machine in time and can cause damage.

Tips for energy and water saving

The following information will help you use the product in an ecological and energy/water-efficient manner.

• Operate the product in the highest load capacity allowed for the programme you have selected, but do not overload. See, “Programme and consumption table”.
• Observe the temperature instructions on the detergent packaging.
• Wash slightly soiled laundry at low temperatures.
• Use faster programs for small quantities of lightly soiled laundry.
• Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.
• If you plan to dry your laundry in a dryer, select the highest spin speed recommended during the washing process.
• Do not use more detergent than the recommended on the detergent packaging.

Loading the laundry

1. Open the laundry cover.
2. Put the laundry items into the machine in a loose manner.
3. Push and close the loading cover until you hear the locking sound. Ensure that no items are caught in the door. The loading door is locked while a program is running. The door can only be opened a while after the programme comes to an end.

Correct load capacity

• The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired.
• The machine automatically adjusts the water amount according to the weight of the laundry put inside it.
• WARNING: Follow the information in the “Programme and consumption table”. When overloaded, the machine’s washing performance will drop. Moreover, noise and vibration problems may occur.

Using detergent and softener

When using detergent, softener, starch, fabric dye, bleacher and decolorant, and descaling agents; read the manufacturer’s instructions written on the package and follow the dosages specified. Use a measuring cup if available.

The detergent drawer is composed of three compartments:

• (1) for prewash
• (2) for main wash
• (3) for softener
• ( ) in addition, there is a siphon piece in the softener compartment.

Detergent, softener and other cleaning agents

• Add detergent and softener before starting the washing programme.
• While the washing cycle is in progress, do not leave the detergent dispenser open!
• When using a program without prewash, do not put any detergent into the prewash compartment (compartment nr. “1”).
• In a programme with prewash, do not put liquid detergent into the prewash compartment (compartment nr. “1”).
• Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place the detergent bag or the dispensing ball directly among the laundry in the machine.

If you are using liquid detergent, do not forget to place the liquid detergent container into the main wash compartment (compartment number “2”).

Choosing the detergent type

The detergent type to be used depends on the washing programme, fabric type and color.

• Use different detergents for coloured and white laundry.
• Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) intended solely for delicate clothes and at suggested programmes.
• When washing dark-coloured clothes and quilts, it is recommended to use liquid detergent.
• Wash woollens at suggested programme with a special detergent made specifically for woollens
• Please review the program descriptions part for the suggested program for different textiles.
• All recommendations about detergents are valid for a selectable temperature range of programmes.
  • CAUTION: Use only detergents manufactured specifically for washing machines.
  • CAUTION: Do not use soap powder.

Adjusting detergent amount

The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness.

• Do not use amounts exceeding the dosage quantities recommended on the detergent package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection.
• Use less detergent for small amounts or lightly soiled clothes.

Using softeners

• Pour the softener into the softener compartment of the detergent drawer.
• Do not exceed the (>max<) level sign on the softener compartment.
• If the softener has lost its fluidity, dilute it with water before putting it in the detergent drawer.

Using liquid detergents

If the product contains a liquid detergent cup:

• Put the liquid detergent container into the compartment no “2”.
• If the liquid detergent loses its fluidity, dilute it with water before putting it into the detergent container.

If the product is equipped with a liquid detergent part:

• When you want to use liquid detergent, press on the point shown to rotate the apparatus. The part that falls off will function as a barrier for the liquid detergent.
• If required, clean the apparatus with water when it is in place or by removing it.
• If you will use powder detergent, the apparatus must be secured at the top position.
• If the product does not contain a liquid detergent cup:
• Do not use liquid detergent for the prewash in a programme with prewash.
• Liquid detergent stains your clothes when used with the Delayed Start function. If you are going to use the Delayed Start function, do not use liquid detergent.

Using gel and tablet detergent

• If the gel detergent thickness is fluidal and your machine does not contain a special liquid detergent cup, put the gel detergent into the main wash detergent compartment during the first water intake. If your machine contains a liquid detergent cup, fill the detergent into this cup before starting the programme.
• If the gel detergent thickness is not fluid or in the shape of a capsule liquid tablet, put it directly into the drum before washing.
• Put tablet detergents into the main wash compartment (compartment nr. “2”) or directly into the drum before washing.

Using starch

• Put the liquid soda, powder soda or fabric dye into the softener compartment. Do not use softener and starch together in a washing cycle.
• Wipe the inside of the machine with a damp and clean cloth after using starch.

Using limescale remover

• When required, use limescale removers manufactured specifically for washing machines only. Using bleaches
• Add the bleach at the beginning of the washing cycle by selecting a prewash program. Do not put detergent in the prewash compartment. As an alternative application, select a programme with extra rinse and add the bleaching agent while the machine is taking water from the detergent compartment during the first rinsing step.
• Do not use bleaching agents and detergents by mixing them.
• Use just a small amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation. Do not pour the bleach onto the laundry and do not use it with the colored items.
• When using an oxygen-based decolorant, select a program that washes the laundry at a low temperature.
• Oxygen-based decolorant can be used with the detergent; however, if it is not at the same consistency, first put detergent in the compartment number “2” in the detergent dispenser and wait for the machine to flush the detergent when taking in water. While the machine continues taking in water, add decolorant in the same compartment.

Tips for efficient washing

| Clothes
---|---
Light Colours and Whites| Colours| Black/Dark Colours| Delicates/ Woolens/Silks
(Recommended temperature range based on soiling level: 40-90 C)| (Recommended temperature range based on soiling level: cold -40

C)

| (Recommended temperature range based on soiling

level: cold -40 C)

| (Recommended temperature range based on soiling

level: cold -30 C)

Soiling Level|

Heavily Soiled

(difficult stains such as grass, coffee, fruits and blood.)

| It may be necessary to pre-treat the stains or perform prewash. Powder and liquid detergents recommended for whites can be used at dosages recommended

for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and stains that are sensitive to bleaches.

| Powder and liquid detergents recommended for colors can be used at dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and stains that are sensitive to bleaches.

Use detergents without bleach.

|

Liquid detergents are suitable for colors and dark colors can be used at dosages recommended for heavily soiled clothes.

|

Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must

be washed with special woollen detergents.

Normally Soiled

(For example, stains caused by the body on collars and cuffs)

|

Powder and liquid detergents recommended for whites can be used at dosages recommended for normally soiled clothes.

| Powder and liquid detergents recommended for colors can be used at dosages recommended for normally soiled clothes. Detergents that do not contain bleach

should be used.

| Liquid detergents suitable for colors and dark colors can be used at dosages recommended for normally soiled

clothes.

| Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special

woolen detergents.

Lightly Soiled

(No visible stains exist.)

|

Powder and liquid detergents recommended for whites can be used at dosages recommended for lightly soiled clothes.

| Powder and liquid detergents recommended for colors can be used at dosages recommended for lightly soiled clothes. Detergents which do not contain bleach should

be used.

| Liquid detergents are suitable for colors and dark colors can be used at dosages recommended for lightly soiled clothes.| Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woolen detergents.

Symbols Table

Operating the product

Control panel

• 1 – Programme Selection Knob (Uppermost position On / Off)
• 2 – Display
• 3 – End Time Adjustment Button
• 4 – Programme Follow-up Indicator
• 5 – Start/Pause Button
• 6 – Auxiliary Function Button 3
• 7 – Auxiliary Function Button 2
• 8 – Auxiliary Function Button 1
• 9 – Spin Speed Adjustment Button 10 – Temperature Adjustment Button

Preparing the machine

1. Make sure that the hoses are connected tightly.
2. Plug in your machine.
3. Turn the tap on completely.
4. Place the laundry in the machine.
5. Add detergent and fabric softener.

Programme selection and tips for efficient washing

1. Select the program suitable for the type, quantity, and soiling degree of the laundry by the “Programme and consumption table” and the temperature table below.
2. Use the Programme Selection knob to select the desired program.

Programme and Consumption Table

Program

| Max. Load (kg)|

Water Consumption (l)

|

Energy Consumption (kWh)

|

Max. Speed

| Rapido| Prelavaggio| Pet Hair Removal| AntiPiega+|

Temperature

(°C)

Cottone

| 90| 6| 83| 1.950| 1000| •| •| •| •| Cold-90
60| 6| 83| 1.800| 1000| •| •| •| •| Cold-90
40| 6| 81| 0.950| 1000| •| •| •| •| Cold-90

Eco 40-60

| 40 *| 6| 45.0| 1.020| 1000| | | | | 40-60
40 *,| 3| 31.0| 0.560| 1000| | | | | 40-60
40 ***| 1.5| 24.0| 0.410| 1000| | | | | 40-60

Classico

| 60 | 6| 47.5| 0.730| 1000| | | | | 40-60
60 | 3| 35.0| 0.615| 1000| | | | | 40-60
40 **| 3| 33.7| 0.610| 1000| | | | | 40-60
Sintetici| 60| 2.5| 68| 1.150| 1000| •| •| •| •| Cold-60
40| 2.5| 66| 0.750| 1000| •| •| •| •| Cold-60

Xpress / Super Xpress

| 90| 6| 62| 1.800| 1000| •| | | •| Cold-90
60| 6| 62| 0.900| 1000| •| | | •| Cold-90
30| 6| 60| 0.200| 1000| •| | | •| Cold-90
Xpress / Super Xpress + Rapido| 30| 2| 60| 0.150| 1000| •| | | •| Cold-90
Mix 40| 40| 3| 70| 0.800| 800| •| •| | •| Cold-40
Lana / Lavaggio a Mano| 40| 1.5| 45| 0.450| 1000| | | | | Cold-40
Delicati| 30| 2| 48| 0.650| 800| | | | | Cold-40
Piumino| 60| 1.5| 85| 0.800| 1000| | | | | Cold-60
Outdoor/Sport| 40| 2.5| 44| 0.450| 1000| | •| | | Cold-40
Capi Scuri / Jeans| 40| 2.5| 70| 0.750| 1000| •| •| •| •| Cold-40
Lingerie| 30| 1| 52| 0.250| 600| | | | | Cold-30
Camicie| 60| 2.5| 60| 1.100| 800| •| •| •| •| Cold-60
Hygiene| 90| 6| 99| 2.300| 1000| | | | | 20-90
Drum Clean| 90| –| 67| 2.100| 600| | | | | 90

• • : Selectable
• *: Automatically selected, cannot be cancelled.
• **: Eco 40-60 ( ) is the test programme in accordance with EN 60456:2016 and energy label with Commission Delegated Regulation (EU) 1061/2010)
• **: Classic ( ) is the test program in accordance with EN 60456:2016 and energy label with Commission Delegated Regulation (EU) 1061/2010
• ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with
• EN 60456:2016/prA:2019 and energy label with Commission Delegated Regulation (EU) 2019/2014
• -: See the programme description for maximum load.

INFORMATION

• Water and power consumption may vary subject to changes in water pressure, water hardness and water temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in the mains voltage.
• When selecting a programme, you can see the washing duration on the display of your machine. Depending on the amount of laundry you have loaded into the machine, there might be a difference of 1 to 1.5 hours between the duration shown on the display and the actual duration of the washing programme. The duration will be corrected automatically right after the washing programme has started.
• The auxiliary functions in the table may vary according to the model of your machine.
• Auxiliary function selection modes can be changed by the manufacturing company. Existing selection modes can be removed or new selection modes can be added.
• Always select the lowest appropriate temperature. The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration.
• Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content.

Consumption Values (EN)

|

Temperature Selection (°C)

|

Spin Speed (rpm)

|

Capacity (kg)

|

Program Duration (hh: mm)

|

Energy Consumption(kWh/ cycle)

|

Water Consumption(L/ cycle)

|

Laundry Temperature (°C)

|

Remaining Moisture Content (%)

Eco 40-60

| 40| 1000| 6| 03:17| 1.020| 45.0| 40| 61
40| 1000| 3| 02:35| 0.560| 31.0| 30| 61
40| 1000| 1.5| 02:35| 0.410| 24.0| 26| 66
Cotone| 20| 1000| 6| 03:25| 0.500| 81.0| 20| 62
Cotone| 60| 1000| 6| 03:25| 1.800| 83.0| 60| 62
Sintetici| 40| 1000| 2.5| 02:15| 0.750| 66.0| 40| 45
Xpress / Super Xpress| 30| 1000| 6| 00:28| 0.200| 60.0| 23| 62

Main programmes

Depending on the type of fabric, use the following main programmes.

• Cotone (Cottons)
  You can wash your durable cotton laundry (sheets, bed linens, towels, bathrobes, underwear etc.) in this programme. When you press the quick wash function key, programme duration becomes notably shorter but effective washing is ensured thanks to intense washing movements. If the quick wash function is not selected, superior washing and rinsing performance is ensured for your heavily soiled laundry.

• Sintetici (Synthetics)
  You can use this programme to wash t-shirts, synthetic/cotton mix fabrics etc. Programme duration is notably shorter and efficient washing performance is ensured. If the quick wash function is not selected, superior washing and rinsing performance is ensured for your heavily soiled laundry.

• Lana/ Lavaggio a Mano (Woollens / Hand Wash)
  Use this programme to wash your woollen/delicate clothes. Select the appropriate temperature complying with the tag of your clothes. Your laundry will be washed with very delicate movements to avoid any damage.

Additional programmes

For special cases, additional programmes are available on the machine.

INFORMATION: Additional programmes may differ according to the model of the machine.

Eco 40-60

The eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle, and this programme is used to assess compliance with the EU ecodesign legislation.

Although it washes longer than all other programmes, it provides high energy and water savings. The actual water temperature may be different from the stated wash temperature. When you load the machine with less laundry (e.g. ½ capacity or less), periods in programme stages may automatically get shorter. In this case, energy and water consumption will decrease.

• Hygiene
  This is a long programme you can use for laundry that requires hygienic and intense washing at a high temperature for a long time. A high level of hygiene is ensured thanks to the long heating and additional rinsing step.

• Classico (Classic)
  Use to wash your normally soiled, durable cotton and linen laundry. Although it washes longer than all other programmes, it provides high energy and water savings. Actual water temperature may be different from the stated wash temperature. When you load the machine with less laundry (e.g. ½ capacity or less), periods in programme stages may automatically get shorter. In this case, energy and water consumption will decrease more, providing a more economic wash

• Delicate (Delicates)
  You can use this programme to wash delicate laundry such as cotton/synthetic mix knitted clothes or socks. Washing movements in this programme are more delicate. Set the temperature to 20 degrees or use the Cold Wash option for clothes whose colour you wish to preserve.

• Xpress / Super Xpress
  Use this programme to wash your lightly soiled cotton clothes in a short time. The programme duration can be reduced to 14 minutes when the quick wash function is selected. When the quick wash function is selected, a maximum 2 (two) kg of laundry must be washed.

• Capi Scuri/ Jeans (Dark Care / Jeans)
  Use this programme to preserve the colour of your dark-coloured clothes and jeans. This programme provides high efficiency in washing, thanks to a special drum movement, even at low temperatures. It is recommended to use liquid detergent or woollen shampoo for dark-coloured laundry. Do not wash your delicate clothes that contain wool etc. in this programme.

• Mix 40
  You can use this programme to wash cotton and synthetics together without the need to sort them.

• Camicie (Shirts)

  • Use this programme to wash shirts made of cotton, synthetic and synthetic blended fabrics together. This programme ensures that your clothes wrinkle less. When the quick wash function is selected, the Pre-treatment algorithm is used.
  • Apply the pre-treatment chemical directly onto the clothes, or add it together with the detergent when the machine starts to take in water from the main wash compartment. This way, it will take you much shorter to get the performance you would normally get with a regular washing cycle. The life of your shirts will be longer.

• Outdoor/Sport
  Use this programme to wash outdoor/sports clothes that contain cotton/synthetic mix, as well as waterproof cloths like gore-tex. This programme washes your laundry delicately thanks to its special turning movements.

• Lingerie
  You can use this programme to wash hand-washable delicate clothes or women’s underwear. A small amount of laundry must be washed in a laundry bag. Clasps and buttons must be done up, and clothes with zip must be zipped.

• Piumino (Down Wear)
  Use this programme to wash down coats, vests, jackets etc. that bear a “machine-washable” tag. Thanks to special spin profiles, it is ensured that water reaches the air gaps between feathers.

Special programmes

For specific applications, select any of the following programmes.

Centrifuga+Scarico (Spin+Drain)

• Use this programme to remove the water on the clothes/in the machine.
• Before selecting this programme, select the desired spin speed and press the Start/Pause button. First, the machine will drain the water inside of it. Then, it will spin the laundry at the selected spin speed, and drain the water coming off of the laundry.
• If you only want to drain the water without spinning the laundry, select the “Spin+Pump programme, and use the Spin Speed Adjustment button to select the No Spin function. Press the Start/Pause button.

INFORMATION: Use a lower spin speed for delicate laundries.

Temperature selection

• Whenever a new programme is selected, the recommended temperature for the selected programme appears on the temperature indicator.
• To decrease the temperature, press the Temperature Adjustment button. The temperature will decrease gradually. When the cold level is selected, temperature level lights will not be on.

INFORMATION: If the programme has not reached the heating step, you can change the temperature without switching the machine to Pause mode.

Spin speed selection

• Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator.
• To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually. Then, depending on the model of the product, “Rinse Hold” and “No Spin” options appear on the display. When the “No Spin” function is selected, rinse level indicator lights will not be on.

Rinse hold

• If you are not going to unload your clothes immediately after the programme ends, you can use the rinse hold function to keep your laundry in the final rinsing water in order to prevent it from getting wrinkled when there is no water in the machine. Press Start/Pause button after this process if you want to drain the water without spinning your laundry. Programme will resume where it left off, drain the water and then it will be complete.
• If you want to spin the laundry held in water, adjust the Spin Speed and press the Start/Pause button. Programme will resume. Water will be drained, laundry will be spun and the programme will end.

INFORMATION: If the programme has not reached the spin step, you can change the spin speed without switching the machine to Pause mode.

Auxiliary function selection

• Select the desired auxiliary functions before starting the programme. You can also select or cancel auxiliary functions suitable for the running programme without pressing the Start/Pause button while the machine is operating. To do this, the machine must be in a step before the auxiliary function you are going to select or
• cancel. If the auxiliary function cannot be selected or cancelled, the light of the relevant function will flash 3 times to warn the user.

INFORMATION

• If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be cancelled and the second auxiliary function selection will remain active.
• An auxiliary function that is not compatible with the programme cannot be selected. (See “Programme and consumption table”)
• Auxiliary Function buttons may vary according to the model of the machine.

Auxiliary functions

• Prelavaggio (Prewash)
  • A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time.
  • INFORMATION: Prewash without detergent is recommended for tulle and curtains.
• • Rapido (Fast+)
  • When this function is selected, the durations of relevant programmes get shorter by 50%.
  • Thanks to the optimised washing steps, high mechanic activity and optimum water consumption, high washing performance is achieved in spite of the reduced duration.
• Pet Hair Removal
  • This function allows you to remove the pet hair on your garments more efficiently.
  • If you select this function, Prewash and Extra Rinse programmes will be added to the regular programme. This way, more water will be used for the washing cycle to ensure that pet hair is removed more efficiently.

Functions/Programmes Selected by Pressing the Function Buttons for 3 Seconds

Drum Clean

• To select this programme, press and hold the auxiliary function button 1 for 3 seconds.
• Use it regularly (every 1-2 months) to clean the drum and ensure the required hygiene is provided. Run the programme while the machine is empty. To obtain better results, put powder lime-scale remover for washing machines into the detergent compartment no. “2”. When the programme is over, leave the loading door ajar so that the inside of the machine gets dry.

INFORMATION

• This is not a washing programme. It is a maintenance programme.
• Do not run this programme when there are any objects in the machine. If you try to do so, the machine will automatically detect that there is a load inside and abort the programme.

Child Lock

• You can prevent children from tampering with the machine by using the Child Lock feature. Thus you can avoid any changes in a running programme.

INFORMATION

• If the Programme Selection knob is turned when the Child Lock is enabled, “Con” appears on the display. While the Child Lock is enabled, you cannot make any change in the programmes, the selected temperature, the speed or the auxiliary functions.
• Even if another program is selected with the Programme Selection knob while the Child Lock is enabled, the previously selected programme will continue running.

To enable Child Lock:

Press and hold the Auxiliary Function button 2 for 3 seconds. While you’re holding the button pressed for 3 seconds, C03, C02 and C01 will be displayed respectively. Then, “Con” will be displayed to warn the user that child lock is enabled.If you press any button or turn the Programme Selection knob while the Child Lock is enabled, the same warning will be displayed.

To disable Child Lock:

• Press and hold the Auxiliary Function button 2 for 3 seconds while the programme is running. While you’re holding the button pressed for 3 seconds, C03, C02 and C01 will be displayed respectively. Then, “COF” will be displayed to warn the user that the child lock is disabled.

INFORMATION

• In addition to the method above, to deactivate the Child Lock, switch the Programme Selection knob to the On/Off position when no programme is running, and select another programme.
• Child Lock will not be disabled after a power failure or unplugging.

AntiPieaga+ (AntiCrease+)

If you press and hold the auxiliary function button 3 for 3 seconds, this function will be selected and the programme follow-up light of the relevant programme will turn on. When this function is selected, the drum will rotate for up to eight hours to ensure that the clothes do not crease at the end of the programme. At any time during these eight hours, you can cancel the programme and unload the machine. Just press any button or turn the programme selection knob to end the function. The programme follow-up light will remain on even if you end the function by pressing any button. If you end the function by turning the programme selection knob, the programme follow-up light will remain on or go off depending on the selected programme. If you do not cancel the function by pressing the Auxiliary Function button 3 for 3 seconds, it will be used in the next washing cycles as well.

End Time Adjustment

The End Time Adjustment function allows you to set the end time of the programme up to 19 hours. You can increase this time by 1-hour intervals.

INFORMATION: Please do not use liquid detergent if you have selected the End Time Adjustment function. Stains might remain on the clothes.

1. Open the loading door, place the laundry add detergent, etc.
2. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3. Press the End Time Adjustment button and select the desired time.
4. Press the Start/Pause button. The delayed end time you have set will be displayed. The countdown will start for the delayed end. On the display, “_” will move up and down next to the delayed end time.
   • INFORMATION: If the programme has not started, you can add laundry to the machine during the delayed end time.
5. At the end of the countdown, the duration of the selected programme will be displayed. “_” will disappear and the selected programme will start.

Changing the delayed end time

If you want to change the time during countdown: Turn the programme selection knob to cancel the delayed end time function, and then set the desired time again.

1. Press the End Time Adjustment button. When pressed for the first time, the programme duration will be rounded up to the closest whole number times. Each following press will increase the time by an hour.
2. If you want to decrease the delayed end time, press the End Time Adjustment button consecutively until the desired time is displayed.

Cancelling the delayed end function

If you want to cancel the delayed end-time countdown and start the programme immediately:

1. Set the Programme Selection knob to any programme. This way, the Delayed End time will be cancelled. The End/Cancel light will flash continuously.
2. Then, select the programme you want to run again.
3. Press the Start/Pause button to start the programme.

Starting the programme

1. Press the Start/Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.

INFORMATION: If no programme is started or no key is pressed within 10 minutes during the programme selection process, the display lights will go off. Once the Programme Selection knob is turned or any button is pressed, display lights will turn on again.

Progress of programme

Progress of a running programme can be followed from the Programme Follow-up indicator. At the beginning of each programme step, the relevant indicator light will turn on.

INFORMATION

• If the “Anti-crease+” auxiliary function has been selected, the “End” LED and “Anti-crease+” LED will be on at the same time while this step is continuing.
• To end the programme while the “Anti-crease+” step is running, simply press any button or turn the programme selection knob.

You can change the auxiliary functions, speed and temperature settings without stopping the programme flow while the programme is running. To do this, the change you are going to make must be something that will be carried out after the programme step that is running. If the change is not suitable, relevant lights will flash 3 times.

INFORMATION: If the machine does not proceed to the spinning step, the Rinse Hold function might be active or the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the machine.

Loading door lock

• There is a locking system on the loading door of the machine that prevents the opening of the loading door in cases when the water level is unsuitable.
• The loading door light will start flashing when the machine is switched to Pause mode. The machine checks the level of the water inside. If the level is suitable, the loading door light will turn off and the loading door can be opened within 1-2 minutes.
• If the level is unsuitable, the loading door light will remain on and the loading door cannot be opened. If you are obliged to open the loading door while the Loading Door light is on, you must cancel the current programme. See “Cancelling the programme”
• Opening the loading door in case of power failure:

INFORMATION: In case of a power failure, you can use the loading door emergency handle under the pump filter lid to manually open the loading door.

WARNING!: Before opening the loading door, make sure that there is no water in the machine to avoid flooding. Water may be hot and could cause scalding.

Changing the selections after programme has started

• Switching the machine to pause mode
• Press the Start/Pause to switch the machine to pause mode while a programme is running. The light of the current programme will flash on the Programme Follow-up indicator, indicating that the machine has switched to pause mode.
• Also, when the loading door is ready to be opened, the Loading Door light will turn off in addition to the programme step light.
• Changing the auxiliary function, speed and temperature
• Depending on the step the programme has reached, you can cancel or select auxiliary functions. See “Auxiliary function selection”.
• You can also change the speed and temperature settings. See “Spin speed selection” and “Temperature selection”.

INFORMATION: If no change is allowed, the relevant light will flash 3 times.

Adding and removing laundry

1. Press the “Start/Pause” button to pause the machine. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the loading door and add or take out the laundry.
4. Close the loading door.
5. Make changes in auxiliary functions, temperature and speed settings if necessary.
6. Press the “Start/Pause” button to start the machine.

Cancelling the programme

To cancel the programme, turn the Programme Selection knob to select another programme. The previous programme will be cancelled. The end/Cancel light will flash continuously to notify that the programme has been cancelled.

When you turn the Programme Selection knob, the machine will end the programme but will not discharge the water inside. When you select and start a new programme, the newly selected programme will start depending on the step the previous programme was cancelled. For example, the machine may take in additional water or continue to wash with the water inside.

INFORMATION: Depending on the step where the programme was cancelled in, you may have to add detergent and softener again for the programme you have selected anew.

End of programme

At the end of the programme, “End” will be displayed.

1. Wait until the light of the loading door goes off completely.
2. Switch the programme selection knob to On/Off to switch off the machine.
3. Take out your laundry and close the loading door. Your machine is now ready for the next washing cycle.

Your machine has the “Pause Mode” function.

After using the On/Off button to switch on the machine, if you do not start any programme in the selection step or do not perform anything else, or if you do not do anything in 10 minutes after the selected programme has ended, the machine will automatically switch to energy saving mode. Also, if your product has a display that shows programme time, this display will completely turn off. If you turn the Programme Selection knob or touch any button, the lights and the display will switch back to the previous position. The selections you make when exiting the energy efficiency mode may change. Check if your selections are correct before starting the programme. If necessary, make adjustments again. This is not an error.

Maintenance and cleaning

The service life of the product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals.

Cleaning the detergent drawer

• Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time.
• Lift the rear part of the siphon to remove it as illustrated.

If more than the normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned.

1. Press the dotted point on the siphon in the softener compartment and pull it towards you until the compartment is removed from the machine.
2. Wash the detergent drawer and the siphon with plenty of lukewarm water in a washbasin. In order to prevent the residues from contacting your skin, clean it with an appropriate brush by wearing a pair of gloves.
3. Insert the drawer back into its place after cleaning and make sure that it is seated well.

Cleaning the loading door and the drum

• For products with drum cleaning programme, please see Operating the product – Programmes.

• Repeat the Drum Cleaning process every 2 months.

• Use a detergent / anti-limescale suitable for the washing machines.

• After every washing make sure that no foreign substance is left in the drum. If the holes below shown in the figure are blocked, open the holes using a toothpick.

• Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum surface by using cleaning agents for stainless steel.

• Never use steel wool or wire wool. These will damage the painted, chrome and plastic surfaces.

Cleaning the body and control panel

• Wipe the body of the machine with soapy water or non-corrosive mild gel detergents as necessary, and dry with a soft cloth.
• Use only a soft and damp cloth to clean the control panel.

Cleaning the water intake filters

There is a filter at the end of each water intake valve at the rear of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water from entering the washing machine. Filters should be cleaned as they do get dirty.

1. Close the taps.
2. Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean them with an appropriate brush. If the filters are too dirty, remove them from their places with pliers and clean them in this way.
3. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water.
4. Replace the seals and filters carefully and tighten their nuts by hand.

Draining the remaining water and cleaning the pump filter

• The filter system in your machine prevents solid items such as buttons, coins and fabric fibres from clogging the pump impeller during the discharge of washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend.
• If the machine fails to drain water, the pump filter is clogged. The filter must be cleaned whenever it is clogged or every 3 months. Water must be drained off first to clean the pump filter.
• In addition, prior to transporting the machine (e.g., when moving to another house) and in case of freezing of the water, water may have to be drained completely.
  • CAUTION: Foreign substances left in the pump filter may damage your machine or may cause noise problems.
  • CAUTION: If the product is not being used, shut the tap shut, remove the main pipe and drain the water inside the machine against any likely freezing.
  • CAUTION: After each use, turn off the water tap to which the mains hose is connected.

1. In order to clean the dirty filter and discharge the water: 1 Unplug the machine to cut off the supply power.

2. • CAUTION: The temperature of the water inside the machine may rise up to 90 ºC. To avoid the burning risk, clean the filter after the water inside the machine is cooled down.

3. Open the filter cover.

4. Follow the below procedures in order to drain water.
   The product does not have an emergency water drain hose, in order to drain the water:

   • In order to collect the water to flow out of the filter, place a large vessel in front of the filter.
   • Turn and loosen the pump filter until water starts to flow (counterclockwise). Fill the flowing water into the container you have placed in front of the filter. Always keep a piece of cloth handy to absorb any spilled water.
   • When the water inside the machine is finished, take out the filter completely by turning it.

5. Clean any residues inside the filter as well as fibres, if any, around the pump impeller region.

6. Replace the filter.

7. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, place the tabs in the lower part into their places first, and then press the upper part to close.

Troubleshooting

Reduce the amount of laundry and make sure that the loading door is closed properly.
The programme cannot be started or selected.| The washing machine has switched to self-protection mode due to a supply problem (line voltage, water pressure, etc.).| • To cancel the programme, turn the Programme Selection knob to select another programme. The previous programme will be cancelled. (see. “Cancellation of the program”)
Water in the machine.| Some water might have remained in the product due to the quality control processes in the production.| • This is not a failure; water is not harmful to the machine.
The machine enters standby mode after the programme starts or it does not take in water.| The tap is turned off.| • Turn on the taps.
The water inlet hose is bent.| • Flatten the hose.
The water inlet filter is clogged.| • Clean the filter.
The loading door may be open.| • Close the door.
The water connection may be wrong or water may be cut off (When the water is cut off, washing or rinsing LEDs flash).| • Check the water connection. If the water is cut off, press the Start/Pause key after the water has been supplied again to resume the operation from standby mode.
The machine does not drain water.| The water drain hose might be clogged or twisted.| • Clean or flatten the hose.
The pump filter is clogged.| •  Clean the pump filter.
The machine vibrates or makes noise.| The machine might be standing unbalanced.| • Adjust the feet to level the machine.
A hard substance might have entered into the pump filter.| • Clean the pump filter.
Transportation safety bolts are not removed.| • Remove the transportation safety bolts.
The laundry quantity in the machine might be too little.| • Add more laundry to the machine.
The machine might be overloaded with laundry.| • Take out some of the laundry from the machine or distribute the load by hand to balance it homogenously in the machine.
The machine might be leaning on a rigid item.| • Make sure that the machine is not leaning on anything.
There is water leaking from the bottom of the washing machine.| The water drain hose might be clogged or twisted.| • Clean or flatten the hose.
The pump filter is clogged.| • Clean the pump filter.
The machine stopped shortly after the programme started.| The machine might have stopped temporarily due to low voltage.| • It will resume running when the voltage restores to the normal level.
The machine directly discharges the water it takes in.| The draining hose might not be at an adequate height.| • Connect the water-draining hose as described in the operation manual.
No water can be seen in the machine during washing.| The water level is not visible from outside of the washing machine.| • This is not a failure.
The loading door cannot be opened.| The door lock is activated because of the water level in the machine.| • Drain the water by running the Pump or Spin programme.
The machine is heating up the water or it is in the spinning cycle.| •  Wait until the programme is completed.
Child lock is engaged. The door lock will be deactivated a couple of minutes after the programme has come to an end.| • Wait for a couple of minutes for deactivation of the door lock.
The loading door may be stuck because of the pressure it is subjected to.| • Grab the handle and push and pull the loading door to release and open it.
Washing takes longer time than specified in the manual.(*)| Water pressure is low.| • Machine waits until taking in an adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.
Voltage might be low.| • Washing time is prolonged to avoid poor washing results when the supply voltage is low.
The input temperature of water might be low.| • Required time to heat up the water extends in cold seasons. Also, washing time can be lengthened to avoid poor washing results.
Several rinses and/or the amount of rinse water might have increased.| • Machine increases the amount of rinse water when good rinsing is needed and adds an extra rinsing step if necessary.
Excessive foam might have occurred and an automatic foam absorption system might have been activated due to too much detergent usage.| •  Use the recommended amount of detergent.

machine takes in an adequate amount of water. The machine will wait until there is a sufficient amount of water to avoid poor washing results due to lack of water. The timer indicator will resume the countdown after this.
The timer may stop during the heating step.| • The timer indicator will not countdown until the machine reaches the selected temperature.
The timer may stop during the spinning step.| • An automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.
Programme time does not countdown. ()| There might be an unbalanced load in the machine.| • An automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.
The machine does not switch to the spinning step. ()| There might be an unbalanced load in the machine.| • An automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.
The machine will not spin if the water is not drained completely.| • Check the filter and the draining hose.
Excessive foam might have occurred and an automatic foam absorption system might have been activated due to too much detergent usage.| •  Use the recommended amount of detergent.
Washing performance is poor: Laundry turns grey. ()| An insufficient amount of detergent has been used over a long period of time.| • Use the recommended amount of detergent appropriate for water hardness and the laundry.
Washing was made at low temperatures for a long time.| • Select the proper temperature for the laundry to be washed.
An insufficient amount of detergent is used with hard water.| • Using an insufficient amount of detergent with hard water causes the soil to stick to the cloth and this turns the cloth grey in time. It is difficult to eliminate greying once it happens. Use the recommended amount of detergent appropriate for water hardness and the laundry.
Too much detergent is used.| • Use the recommended amount of detergent appropriate for water hardness and the laundry.
Washing performance is poor: Stains persist or the laundry is not whitened. ()| An insufficient amount of detergent is used.| • Use the recommended amount of detergent appropriate for water hardness and the laundry.
Excessive laundry was loaded in.| • Do not load the machine in excess. Load with amounts recommended in the “Programme and consumption table”.
The wrong programme and temperature were selected.| • Select the proper programme and temperature for the laundry to be washed.
The wrong type of detergent is used.| • Use the original detergent appropriate for the machine.
Too much detergent is used.| • Put the detergent in the correct compartment. Do not mix the bleaching agent and the detergent with each other.
Washing performance is poor: Oily stains appeared on the laundry. ()| Regular drum cleaning is not applied.| • Clean the drum regularly. For this, please see 4.4.2.
Washing performance is poor: Clothes smell unpleasant. ()| Odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/or in short programmes.| • Leave the detergent drawer as well as the loading door of the machine ajar after each washing. Thus, a humid environment favourable for bacteria cannot occur in the machine.
The colour of the clothes faded. (**)| Excessive laundry was loaded in.| • Do not load the machine in excess.
The detergent in use is damp.| • Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
A higher temperature is selected.| • Select the proper programme and temperature according to the type and soiling degree of the laundry.

washing machine and your laundry. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
The detergent is put in the wrong compartment.| • If detergent is put in the prewash compartment although the prewash cycle is not selected, the machine can take this detergent during the rinsing or softener step. Put the detergent in the correct compartment.
The pump filter is clogged.| • Check the filter.
The drain hose is folded.| • Check the drain hose.
The laundry became stiff after washing. ()| An insufficient amount of detergent is used.| • Using an insufficient amount of detergent for the water hardness can cause the laundry to become stiff in time. Use an appropriate amount of detergent according to the water hardness.
The detergent is put in the wrong compartment.| • If detergent is put in the prewash compartment although the prewash cycle is not selected, the machine can take this detergent during the rinsing or softener step. Put the detergent in the correct compartment.
Detergent might be mixed with the softener.| • Do not mix the softener with detergent. Wash and clean the dispenser with hot water.
Laundry does not smell like the softener. ()| The detergent is put in the wrong compartment.| • If detergent is put in the prewash compartment although the prewash cycle is not selected, the machine can take this detergent during the rinsing or softener step. Wash and clean the dispenser with hot water. Put the detergent in the correct compartment.
Detergent might be mixed with the softener.| • Do not mix the softener with detergent. Wash and clean the dispenser with hot water.
Detergent residue in the detergent drawer. ()| Detergent is put in a wet drawer.| • Dry the detergent drawer before putting in the detergent.
The detergent has gotten damp.| • Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
Water pressure is low.| • Check the water pressure.
The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent compartment are blocked.| • Check the holes and clean if they are clogged.
There is a problem with the detergent drawer valves.| • Call the Authorised Service Agent.
Detergent might be mixed with the softener.| • Do not mix the softener with detergent. Wash and clean the dispenser with hot water.
Regular drum cleaning is not applied.| • Clean the drum regularly. For this, please see 4.4.2.
Too much foam forms in the machine. ()| Improper detergents for the washing machine are being used.| • Use detergents appropriate for the washing machine.
Excessive amount of detergent is used.| • Use only sufficient amount of detergent.
The detergent was stored under improper conditions.| • Store detergent in a closed and dry location. Do not store in excessively hot places.
Some meshed laundry such as tulle may foam too much because of their texture.| • Use smaller amounts of detergent for this type of item.
The detergent is put in the wrong compartment.| • Put the detergent in the correct compartment.
The softener is being taken early.| • There may be a problem in the valves or in the detergent dispenser. Call the Authorised Service Agent.
The foam is overflowing from the detergent drawer.| Too much detergent is used.| • Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer.
| • Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and

consumption table”. When you use additional chemicals (stain removers, bleachs, etc),

reduce the amount of detergent.

have occurred and an automatic foam absorption system might have been activated due to too much detergent usage.| • Use the recommended amount of detergent.
(*) The machine does not switch to a spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. The laundry should be rearranged and re-spuned.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.4.2
A| CAUTION: If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.

1911861331_IT_EN

Frequently Asked Questions

What are the technical specifications of the Beko WUX61032W-IT Washing Machine?

The Beko WUX61032W-IT Washing Machine has the following technical specifications: It is manufactured by Beko with the model name WUX61032W-IT 7000040068. The dimensions are as follows: Height - 84 cm, Width - 60 cm, Depth - 44 cm, and it has a net weight of approximately 55 kg. It operates on an electrical input of 230 V / 50Hz, with a total current of 10 A and a total power consumption of 1550 W. The main model code is 9213.

How should I install the Beko WUX61032W-IT Washing Machine?

For installation, it is recommended to contact the nearest authorized service agent. The responsibility for preparing the installation location, including electrical, tap water, and waste water connections, lies with the customer. Ensure that water inlet and discharge hoses, as well as the power cable, are not folded, pinched, or crushed during installation or cleaning procedures. Authorized service personnel should handle the installation and electrical connections to prevent any potential damages. Before installation, visually check if the product has any defects, and if so, do not proceed with installation to ensure safety.

Where should I place the washing machine for appropriate installation?

To ensure proper installation, place the washing machine on a hard and level floor. Avoid placing it on carpets with high pile or similar surfaces. When stacking the washing machine and dryer, ensure they are on a solid and flat floor with sufficient load-carrying capacity, as their combined weight, when loaded, can reach 180 kilograms. Do not place the product on the power cable, and avoid installing it in environments where the temperature falls below 0 ºC. Leaving a gap at the sides of the machine is recommended to reduce vibration and noise. Avoid placing heat sources such as hobs, irons, ovens, etc., on the washing machine, and do not use them on the product.

How do I remove the packaging reinforcement and transportation locks?

To remove the packaging reinforcement, tilt the machine backward and pull the ribbon. Loosen all bolts with an appropriate wrench until they turn freely to remove the transportation safety bolts. Insert the plastic covers into the bag containing the user manual to the openings on the rear panel. Ensure that transportation safety bolts are removed before operating the washing machine to prevent damage. Keep these bolts in a safe place for future use when moving the machine, and install them in reverse order if needed. Never move the product without properly fixed transportation safety bolts.

How do I connect the water supply for the washing machine?

The water supply pressure required to run the product should be between 1 to 10 bars (0.1 – 1 MPa). You need to have 10 – 80 liters of water flowing from the fully open tap in one minute for smooth operation. If the water pressure is higher, consider attaching a pressure-reducing valve. It's important to note that models with a single water inlet should not be connected to the hot water tap to avoid damaging the laundry or causing the product to switch to protection mode. Do not use old or used water inlet hoses on the new product, as it may cause stains on your laundry. Tighten the nuts of the hose by hand, and avoid using tools for tightening. Check for leaks at the connection points by opening the taps fully after the hose connection. In case of leaks, turn off the tap, remove the nut, check the seal, and retighten the nut carefully. Keep the taps closed when the product is not in use to prevent water leaks and damage.

How should I connect the drain hose to the drain?

To connect the drain hose, attach the end of the drain hose directly to the waste water drain, lavatory, or bathtub. Secure the drain hose to a minimum height of 40 cm and a maximum height of 100 cm. Avoid elevating the drain hose after laying it on the floor or close to the ground (less than 40 cm above the ground) to prevent excessive wetness of the laundry. Do not immerse the end of the hose into the waste water or insert it into the drain for more than 15 cm; if it's too long, cut it short. Ensure that the hose end is not bent, stepped on, or pinched between the drain and the machine. If the hose length is too short, you can use an original extension hose, but its length should not exceed 3.2 m. To avoid water leaks, ensure a well-fitted connection between the extension hose and the drain hose of the product with an appropriate clamp to prevent it from coming off and leaking.

How do I adjust the feet of the washing machine?

To ensure that the product operates silently and free from vibration, it should stand level and balanced on its feet. You can achieve this by adjusting the feet. Do not use any tools to loosen the lock nuts to avoid damaging them. Loosen the lock nuts on the feet by hand, adjust the feet until the product stands in a stable and balanced manner, and then tighten all lock nuts by hand again.

How do I make the electrical connection for the washing machine?

Connect the product to a grounded outlet protected by a 16 A fuse. It's essential to ensure grounding by local regulations, as the manufacturer shall not be liable for damages resulting from the use of the product without proper grounding. The electrical connection must comply with national regulations, and the wiring for the electrical outlet circuit should be sufficient to meet the appliance requirements. The use of a Ground Fault Circuit Interrupter (GFCI) is recommended for added safety. The power cable plug must be easily accessible after installation. If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse. Ensure that the voltage specified in the Technical Specifications section matches your mains voltage. Do not make connections via extension cables or multi-plugs, and in the case of damaged power cables, they must be replaced by Authorized Service Agents.

Can I wash curtains in this washing machine?

Yes, you can wash curtains in this washing machine. However, it's important to place them in the machine without compressing them and remove any curtain attachment items to prevent damage to both the machine and the curtains.

What should I consider when preparing laundry for washing?

Remove laundry items with metal attachments such as underwired bras, belt buckles, or metal buttons, as they can damage

Can I wash laundry with metal attachments in this washing machine?

No, it is not recommended to wash laundry with metal attachments such as underwired bras, belt buckles, or metal buttons in this washing machine. These items can potentially damage the machine. Remove any items with metal attachments before washing, or use a laundry bag or pillowcase to contain them.

How should I treat tough stains before washing in this washing machine?

Tough stains should be treated properly before washing. If you have stains on your laundry, it's advisable to pre-treat them according to the type of stain and fabric. Follow the instructions on stain remover products or consult a dry cleaner if you're unsure how to treat specific stains effectively.

Reference:Beko WUX61032W-IT Washing Machine User’s Manual- device.report

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>