ATSAFEPRO AT215A002-3NM Bicycle Torque Wrench Set Installation Guide
- June 15, 2024
- ATSAFEPRO
Table of Contents
ATSAFEPRO AT215A002-3NM Bicycle Torque Wrench Set Installation Guide
ATsafepro is committed to provide customers with high-quality tools. Improve our product quality is our main task, We have a professional production team and service team, while providing quality products, we also provide satisfactory services, Any question for the tools are welcome!
Operation method
1.Pull down the locker and hold it. The wrench is unlocked.
2.Turn the handle to set the torque while holding the lock knob. Clockwise increase value, counterclockwise decrease value. (The figure below shows the adjustment method of 66Nm)
3. After setting the required torque, release the hand, and the button will
bounce back and lock the handle.
4. Turn the handle left and right to make sure the wrench is locked and start
using. (The minor scale may move a small amount to either side of the
centerline mark without affecting the accuracy of your setting.)
5. Choose the direction of clockwise or counterclockwise on the paddle of the
wrench head.
6. If choose clockwise (counterclockwise) direction, Rotate the wrench
clockwise(counterclockwise), when you hear the “click”, it means that you have
reached the required strength.
7. After use, reset the torque wrench to 0 to maintain its life.
TO GET SUPPORT:
E-mail: support@atsafepro.com
Website: www. atsafepro.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>