BYGD 1500W Power Inverter DC 12V to 110V AC Converter Instruction Manual
- June 15, 2024
- BYGD
Table of Contents
DC to AC Power inverter
P series model
Last update: 10/23/2020
SAFETYINSTRUCTIONS-PARTB
Always consider all the technical specifications of the fitting. Verify the
stated icons on the identification label on the fitting and the icons that are
shown in part A of your safety instructions.
ATTENTION: Below you will find all the explanations with numeric
reference to the icons at the front of these safety instructions:
- This fitting should only be installed indoors.
- WEEE 2012/19/EU.
- Protection class II: the fitting is double insulated and must not be connected to an earth.
- The product is not suitable for use under dust and moisture.
- Ambient temperature: -10 – 40°C
- The product is not suitable for covering with thermally insulated material.
- A safety isolating transformer between the primary circuit and secondary circuit.
- output wave type: modified sine wave.
- The power switch should be “OFF” position due intention to clean the power inverter with a dry cloth duster, do not use abrasives or solvents. Avoid liquid on all electrical parts.
- This product is designed for general power inverter service (excluding for example explosive atmospheres).
DECLARATION
Warning: This power inverter is not designed for use with hair dryers,
power tools, heaters and other high power products. If used continuously do
not exceed the rated power of converter.
Declaration of conformity: Hereby, BYGD declares that the whole equipment
type P series model power inverter system is in compliance with Directive
2014/35/EU. This BYGD product complies with all applicable standards and
regulations regarding exposure to electromagnetic fields. In the event of
construction faults or material damages, the manufacturer
guarantees up to 18 months for power inverter (unless otherwise stated on the
packaging). Broken fuse and supply wire do not fall under the guarantee terms.
Any damage caused to the light fitting in extreme conditions (coastal areas,
industrial surroundings, farm environments) will not be covered by the
guarantee. The period of guarantee starts from the purchase date and is only
valid on presentation of the receipt.
The guarantee is void if the fitting was not installed according to the
instructions, or if it has been repaired or modified.
The manufacturer does not accept any liability for damage caused as a result
of misuse or incorrect application of the fitting. (WEEE) Disposal of your old
product: Your product is designed and manufactured with high-quality materials
and components, which can be recycled and reused. When this crossed-out
wheelie bin symbol is attached to a product, it means that the product is
covered by European Directive 2012/19/EU. Please find out about your local
collection system for electrical and electronic products. Please act according
to your local rules and do not dispose of your old products with your normal
household waste. The correct disposal of your old product will help to prevent
potential negative consequences for the environment and human health.
PROTECTION FUNCTION
SPECIFICATION
| Model | P800U | P1000U | P1200U | P1500U |
|---|---|---|---|---|
| Input rated voltage | DC 12 V (limt: DC 11 V – 15 V) | |||
| Output rated voltage | AC 100 V/110 V/220 V-240 V | |||
| Output raded frequency | 55 Hz / 60 Hz / 50 Hz | |||
| USB output | DC 5 V 2100 mA max | |||
| Output rated power | 800 W | 1000 W | 1200 W | 1500 W |
| Peak of surge power | 1600 W | 2000 W | 2400 W | 3000 W |
| Overload protection | 900 W max | 1125 W max | 1470 W max | 1605 W max |
| Output wave type | Modified sine wave | |||
| Output rated efficiency | > 85% | |||
| No working input current | < 0.05 A max | |||
| Input low voltage alarm | 10.5 V (limt: ±0.3 V) | |||
| Input low voltage shut down | DC 9.5 V (limt: ±0.3 V) | |||
| Input over voltage shut down | DC 15.5 V limt: ±0.5 V) | |||
| Extemal fuse | 25 Ax 4 | 30 Ax 4 | 35 Ax 4 | 40 Ax 4 |
| Ambient temperature | -10 40°C | |||
| Cooling method | Fan / Metal encolsure | |||
| Accessories | Battery clip cable | Leadwire |
User manual
The power inverter images are for reference only and do not represent the actual product. Please refer to the final product in the box.
DIMENSION
| 8oo w| 1000 W| 1200 W| 1500 W
---|---|---|---|---
L| 212 mm| 250 mm| 285 mm| 285 mm
W| 167 mm| 137 mm| 167 mm| 167 mm
H| 78 mm| 78 mm| 78 mm| 78 mm
Weight| 1.35 kg| 1.73 kg| 2.0 kg| 2.0 kg
PRODUCT DISPLAY
1. AC output socket
2. Fan
3. USB port
4. Power light (green)
5. Power switch| 6. Fault light (red)
7. Fan
8. “-” DC connect Terminal (black)
9. External fusel
10. “+” DC connect Terminal (red)
---|---
INSTALLATION
Jiangxi Baiying High-Tech Holdings Co., LTD
6th, Jingcheng Road, Yujiang lindustry Park, Yujiang Town, Yingtna City,
Jiangxi Province, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>