gooboy 64988 LED Clamp Magnifying Lamp User Manual

good boy 64988 LED Clamp Magnifying Lamp

Product Information

Specifications

• Item number : 64988, 64986
• Connections: Contour plug (Type C, CEE 7/17)
• Input voltage: 220-240 V, 50/60 Hz (64988), 20 V, 0.5 A (64986)
• Lens type : Crystal glass lens (64988), Standard glass lens (64986)
• Magnifying lens : Magnification of 3 dpt (1.75x)
• LEDs: 90 SMD LEDs, 60 SMD LEDs
• Luminous color : Cool white (64988), Warm white – cool white (64986)
• Color temperature : 6500 K (64988), 3500 – 6500 K (64986)
• Color rendering index : 80 Ra
• Beam angle : Not specified
• Energy efficiency class: F
• L70 B50 lifetime : 25000 h
• Switching cycles : 12500 x
• Protection level / Protection class : IP20 / II (64988), IP20 / III (64986)
• Dimmability : Dimmable with 6 settings
• Weighted energy consumption : 9 kWh / 1000 h (64988), 10 kWh / 1000 h (64986)
• Working radius : 700 mm (64988), 1.5 m (64986)
• Magnifier head swivel range : 10 – 60 mm (64988), 10 – 50 mm (64986)
• Cable length : Not specified
• Thickness table clamp: Not specified
• Dimensions |
• Weight: 820 x 650 x 230 mm | 2590 g (64988), 820 x 650 x 205 mm | 2232 g (64986)

Product Usage Instructions

Safety Instructions Please always observe the accident prevention regulations for
electrical systems and equipment set forth by the Health and Safety Executive. Trained personnel must always supervise the handling of products and accessories in schools, training facilities, and workshops for hobbies and self-help. Risk of crushing.

Description and Function

The product is an energy-efficient and versatile LED magnifying lamp with a replaceable glass lens. It is ergonomically shaped, adjustable, space-saving, and designed for mounting on stable horizontal surfaces.

Package Contents

• 64988: LED clamp magnifying lamp, table clamp, user manual
• 64986 : LED clamp magnifying lamp, table clamp, power supply, user manual

Controls

See Fig. 1.

1. (Cover)
2. (Locking screw)
3. (Control button)
4. (Mounting ring)
5. (Magnifying lens)
6. (Handle)
7. (Swing arm)
8. (Power supply and DC connection)
9. (Table clamp)

Preparation

Make sure the product is suitable for indoor use only and works with alternating current. It is classified as Class II equipment according to IEC standards.

Assembly and Disassembly

BAIL! Risk of injury due to unsuitable environmental conditions.

WARNING! The working radius is 10 – 60 mm (64988).

Follow the steps below for assembly:

1. Attach the LED clamp magnifying lamp to the table clamp (See Fig. 3). Make sure the connection between the lamp and the table clamp is secure.
2. Tighten the locking screw (2) on top of the lamp as needed. Turn the locking screw clockwise.

Lamp Dimmable (64988)

Replacing the Light Source The light sources are not replaceable as they are fixed. Removing and Replacing the Magnifying Lens Not specified.

Maintenance, Care, Storage, and Transportation

The product is maintenance-free.

WARNING! Risk of injury due to improper disposal.

Disposal Instructions

FAQs

Q: Is the lamp suitable for outdoor use?

A: No, the lamp is designed for indoor use only.

Q: Can the light source be replaced?

A: No, the light sources are not replaceable as they are fixed.

Q: What is the working radius of the lamp?

A: The working radius is 10 – 60 mm (64988) and 10 – 50 mm (64986).

Specifications

Useful luminous flux (Φuse) in

a wide cone (120°)

| 730 lm| 800 lm
Luminous color| cool white| warm white – cool white
Color temperature| 6500 K| 3500 – 6500 K
Color rendering index| 80 Ra
Beam angle| 103°| 108°
Energy efficiency class| F
L70 B50 lifetime| 25000 h
Switching cycles| 12500 x
Protection level / Protection class| IP20 / II| IP20 / III
Dimmability| Dimmable (6 settings)
Weighted energy consumption| 9 kWh / 1000 h| 10 kWh / 1000 h
Working radius| 700 mm
Magnifier head swivel range| 360°| 250°
Magnifier head tilt angle| 90°| 100°
Cable length| 1.5 m| –
Thickness table clamp| 10 – 60 mm| 10 – 50 mm
Dimensions | Weight| 820 x 650 x 230 mm | 2590 g| 820 x 650 x 205 mm | 2232 g
Power Supply
Connectors| | EURO plug (Type C, CEE 7/16), DC plug 5.5 x 2.1 mm
Input| | 220-240 V           , 50/60 Hz,

0.3 A max.

Output| | 20 V    , 0.5 A, 10 W
Polarity| | positive
Protections class| | II
Cable length| | 1.5 m
Dimensions | Weight| | 62 x 60 x 39 mm | 76.5 g

Safety instructions

• The user manual is part of the product and contains important information for correct use.
• Read the user manual completely and carefully before use.
• The user manual must be available for uncertainties and passing the product.
• Keep this user manual.
• Do not open the housing.
• Do not modify product and accessories.
• Use product, product parts and accessories only in perfect condition.
• Do not repair defective products yourself, but contact the dealer or the manufacturer.
• NEVER leave the product unattended while in operation.

Not recommended for children and people with physical and/or mentally limited capabilities.

• Secure packaging, small parts, and insulation against accidental use. Please always observe the accident prevention regulations for electrical systems and equipment set forth by the Health and Safety Executive.
  Trained personnel must always supervise the handling of products and accessories in schools, training facilities, and workshops for hobbies and self-help.

Risk of crushing

• Do not put your fingers or limbs in the clamping device.

Blinding

• Never look directly into the light source.
• Never look at bright sources of light, such as LED lamps or lasers, through the lens.

The eyes can be damaged!

• Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.
• Only use in dry ambiance.
• Install the system and devices attached to it in a way that persons cannot be injured, or objects not be damaged for example by dropping or stumbling.
• Do not install the product near flammable liquids or gases! There is a risk of fire and explosion.
• Use only the supplied power supply.

Voltage-free only with pulled plug

• In case of emergency, after use and during a thunderstorm, pull the mains plug out of the socket directly at the plug housing.
• Switch the light off after doing any work on the product and unplug the power cord.

Fire hazard

Intense sunlight is concentrated by the lens and can magnify it to the point that it creates a fire hazard.

• Always keep the lens out of direct sunlight when it is not in use and ALWAYS close the cover flap.
• Do not attach any objects to the product.

Cutting hazard

Broken glass is extremely sharp.

• Exercise caution when removing the lens.
• Dispose broken glass with suitable protective measures.

Not suitable for fastening to fibreboard, plastics and hollow profiles! These can crack over time.

Description and function product

The product is an energy-efficient and versatile LED magnifier lamp with replaceable glass lens, It is ergonomically shaped and variably adjustable, space-saving and designed for mounting on stable horizontal supports.

Scope of delivery

• 64988 : LED clamp magnifier lamp, table clamp, User Manual
• 64986: LED clamp magnifier lamp, table clamp, power supply, User Manual

Operating Elements

See Fig. 1.

1. Cover flap
2. Locking screw
3. Operating button
4. Fixing ring
5. Magnifying lens
6. Handle
7. Swivel arm
8. Power supply and

Intended use And  Preparation

Intended use

We do not permit using the device in other ways like described in chapter „Description and Function“ or in the „Safety Instructions“. Use the product only in dry interior rooms. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.

IP20: This product is protected against medium-sized foreign objects, but not against water ingress.

Preparation

1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of product, power supply and peripherals. These must be identical.
3. Check underlays and panels for stability.

Montage and dismounting

CAUTION! Risk of injury due to unsuitable environmental conditions

• Do not mount the product in places with direct sunlight or strong light. This causes eye fatigue.

NOTICE! Material damage

• Mount and dismount the product carefully.
• Only attach the clamp to stable boards with a thickness between 10 – 50 mm (64986) or 10 – 60 mm (64988).

Not suitable for fastening to fibre, plastic and hollow profile panels! These can give way over time.

• Keep enough space around the product to ensure good ventilation and mobility.

Fastening the table clamp

1. Position the table clamp (9) on a stable board with a thickness between 10 – 50 mm (64986) or 10 – 60 mm (64988).
2. Tighten the screw until the table clamp is fixed.

Mounting

1. Place the LED magnifying lamp on the table clamp (see Fig. 3). When adjusting the LED magnifying lamp, make sure that the connection to the table clamp is only plugged in.
2. Fix the locking screw (2) at the top of the LED magnifying lamp as required. To do this, turn the locking screw clockwise.

Connection

CAUTION! Risk of injury from tripping and falling

• Lay cables in a safe manner.

Connection (64988)

• Connect the mains plug to an easily accessible socket.

Connection (64986)

1.  Connect the mains plug from the power supply (8) to an easily accessible socket.
2. Connect the DC connector of the power supply to the magnifying lamp.

Dimmability

See Fig. 2.

Magnifying lamp (64988)

• The magnifying lamp can be dimmed in 6 steps. If you press button A, the light becomes brighter, if you press button B, it becomes darker.

Magnifying lamp (64986)

The magnifying lamp has one ring with warm white LEDs and one ring with cool white LEDs. Both LED rings can be dimmed independently of each other in 6 steps via two buttons each.

1. Press button C to make the warm white light brighter. Press button D to make it darker.
2.  Press the E key to make the cool white light darker. Press key F to make it brighter.

If both LED rings are at the same brightness level, the mix results in a neutral white light. If the warm white LED ring is at the highest level and the cool white at the lowest, the light appears warm white. If you set the warm white LED ring to the lowest level and the cool white LED ring to the highest level, the light appears cool white.

Replacing the lamps

The lamps are permanently installed and cannot be replaced.

Removing and replacing the magnifying lens

The magnifying lens is replaceable and can be removed if damaged or for transport.

1. Switch off the magnifying lamp.
2. Adjust the lamp horizontally with the cover flap pointing upwards.
3. Turn the fastening ring (4) counterclockwise with both hands to loosen the lens (see Fig. 5).
4. Remove the old magnifying lens (5).
5. Insert a new magnifying lens.
6. Turn the fixing ring (4) clockwise with both hands to fix the lens.

Operation

1. Before each use, check that the lamp is securely fastened.
2. Hold the table clamp securely with one hand and align the lamp with the other hand.
3. Switch the lamp on or off using the operating button (3).

Maintenance, Care, Storage and Transportation

The product is maintenance-free.

NOTICE! Material damage

• Regularly check the tightness of the product/screws.
• Do not overtighten the screws. Threads can be damaged.
• Be careful to avoid scratches.
• Switch the product off and unplug it from the mains before each cleaning.
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected ambiance when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.

Pressure marks may remain visible when the product is disassembled.

Disposal instructions

According to the European WEEE directive, electrical and electronic equipment must not be disposed of with consumer waste. Its components must be recycled or disposed of apart from each other. Otherwise contaminative and hazardous substances can damage the health and pollute the environment. As a consumer, you are committed by law to dispose of electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection.

WEEE No : 82898622

• Goobay®
• by Wentronic GmbH | Pillmannstraße 12
• 38112 Braunschweig | Germany

Subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>