Kingston IronKey Keypad 200 Series Encrypted USB Flash Drive User Guide

June 15, 2024
Kingston

Kingston logo Quick Start Guide
IronKey Keypad 200

IronKey Keypad 200 Series Encrypted USB Flash Drive

Find the language and latest documentation here.
IronKey Keypad 200 Quick Start Guide

Kingston IronKey Keypad 200 Series Encrypted USB Flash
Drive

The Kingston® IronKeyTM Keypad 200 (KP200) may need to be charged before use for 30-60 minutes by inserting into a powered USB port.
The KP200 is supplied in the ‘Initial Shipment State’ with no pre-set User PIN. An 8-15 digit User PIN must be created before the drive can be used as set out below under ‘First Time Use’.

PIN Requirements:

  • Must be between 8-15 digits in length
  • Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3-3)
  • Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7-8), (7-8-9-0-1-2-3-4)

First Time Use

  1. Press KEY button once .
    All LEDs switch on, solid RED and blinking GREEN and BLUE LEDs.

  2. Press the KEY button twice (double-click)  .
    LEDs switch to a blinking BLUE LED.

  3. Enter your New (8-15 digit) User PIN and press the KEY button twice (double-click) .
    Blinking BLUE LED will switch to a blinking GREEN LED.

  4. Re-enter your New (8-15 digit) User PIN and press the KEY button twice (double-click) .
    Solid RED LED will switch to a solid GREEN LED indicating the User PIN has been successfully created and drive unlocked.

To lock the KP200, save all data and safely eject the drive.

To unlock the KP200 with the User PIN, follow the steps as set out below.

Unlocking with the User PIN

  1. Press KEY button once.
    RED LED will blink.

  2. Enter your User PIN and press the KEY button once.
    Solid RED LED will switch to a solid GREEN LED indicating the User PIN has been successfully entered and the drive unlocked.

Note: Once KP200 has been successfully un- locked, the solid GREEN LED will remain on for 30 seconds only, during which time the KP200 needs to be connected to a powered USB port to access the drive. To configure the drive, refer to the user manual pre-loaded on your KP200.

Kingston logowww.kingston.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Kingston User Manuals

Related Manuals