SIEMENS E10PL-112 Intelligent VAV Actuator Bacnet Instruction Manual
- June 15, 2024
- SIEMENS
Table of Contents
**SIEMENS E10PL-112 Intelligent VAV Actuator Bacnet Instruction Manual
**
Contents
-
a. Actuator
-
b. Shaft insert for use with
3/8-inch (8-10 mm) shafts -
c. Mounting bracket
-
d. Hex wrench
-
e. Mounting screws
Hints/Warnings
NOTE: To open damper clockwise, use the configuration tool to set the
Control action parameter to Direct.
To open damper counterclockwise, use the configuration tool to set the Control
action parameter to Reverse.
Shaft Attachment
3/8-inch (8-10 mm) shafts – **Figures 1, 2, 4, and 5.
1/2-inch (10-13 mm) shafts Figures 3 and 5.
**
Bracket Attachment
Tight space installation
CAUTION: These holes for use with accessory kits only. Do not use in the installation of direct-coupled applications.
Limits for Angular Rotation
NOTE: It is recommended to proportionally adjust the Rise time parameter from 0 to 100% and the Fall time parameter from 100 to 0% using the configuration tool if limits for angular rotation are manually set
Dimensions In Inches (mm)
Wiring diagrams
Supply and Exhaust VAV with Integrated Damper Actuator and Heating/Chilled
Ceiling – DXR1.E10PL-112/US
Fan Powered Box with Variable Speed Fan and Staged Electric Reheater –
DXR1.E10PL-113/US
- Not internally connected to with from power supply (internally connected with of Y5 and Y6 outputs only).
Open Source Software (OSS)
All Open Source Software components used within the product (including
copyright and licensing) are available at
https://www.siemens.com/download?A6V11607673
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners. © 2021-2022 Siemens Industry, Inc.
Siemens Industry, Inc.
Smart Infrastructure
1000 Deerfield Parkway
Buffalo Grove, IL 60089
USA
+ 1 847-215-1000
Your feedback is important to us. If you have comments about this document, please send them to sbt_technical.editor.us.sbt@siemens.com
Document No. A5W00206529A
Printed in China
Page 4 of 4
