Singular XYZ T8 Pro High Precision Tablet Instruction Manual

T8 Pro High Precision Tablet

T8 Pro
High Precision
Tablet Manual
V1.0, modified on 2021.12.04

Corporate Office
SingularXYZ Intelligent Technology Ltd.
Room 211, Floor 2, Building A, No. 599 Gaojing Road, 201702 Shanghai, China
Tel: +86-21-60835489
Fax: +86-21-60835497
Website: http://www.singularxyz.com
E-mail: singularxyz@singularxyz.com
Trademark notice
© 2021 SingularXYZ Intelligent Technology
Ltd. All rights reserved.
SingularXYZ is the official trademark of SingularXYZ Intelligent Technology Ltd.,
registered in People’s Republic of China, EU, USA and Canada.
FCC Notice
SingularXYZ® RT8Procomply with the limits for a Class B digital device, pursuant to the Part 15 of the FCC rules when it is used in the Portable Mode.
Operation is subject to the following twoconditions:
4 This device may not cause harmful interference;
5 It must accept any interference received, including interference that may causeundesired operation.
Copyright Notice
T his is the V1.0 (Dec, 2021) revision of the T8Pro User Guide. It cannot be copiedor translated into any language without the written permission of SingularXYZ.
Technical Assistant
If you have any question and can’t find the answer in this manual, please contact your local dealer from which you purchased the T8Pro. Alternatively, request technical support from SingularXYZ .Website: www.singularxyz.com or technical support email: singularxyz@singularxyz.com. Your feedback about this Guide will help us to improve it with future revisions.
Safety Information
Before using the Tablet, please make sure that you have read and understood this User Guide, as well as the safety requirements.
4 Connect your devices strictly based on this UserGuide
5 Avoid falling to ground, or colliding with other items
6 Do not rotate GNSS antenna
7 Do not cover the radio, keep a sound ventilationenvironment
8 Change the cable if damaged
Related Regulations
The tablet contains integral Bluetooth wireless technology. Regulations regarding the use of the datalink vary greatly from country to country. In some countries, the unit can be used without obtaining an enduser license. But in some countries the administrative permissions are required. For license information, please consult your localdealer.
Use and Care
The tablet can withstand the rough treatment that typically occurs in the field. However,the tablet is high- precision electronic equipment and should be treated with reasonablecare.
Warning and Caution
An absence of specific alerts does not mean that there are no safety risks involved. A Warningor Caution information is intended to minimize the risk of personal injury and/or damage tothe equipment.
WARNING- A Warning alerts you to a potential risk of serious injury to your person and/or damage to the equipment, because of improper operations or wrong settings of the equipment.
CAUTION- A Caution alerts you to a possible risk of damage to the equipment and/or data loss.
Warranty Notice
SingularXYZ does not warranty devices damage because of force majeure (lighting,high voltage or collision). SingularXYZ does not warranty the disassembleddevices.

Chapter 1 Introduction

1.1 About the T8Pro
Embedded with high precision GNSS module, the T8 Pro can simultaneously track all running and planned constellations including GPS, GLONASS, BeiDou, Galilei, QZSS and Navic, providing centimeter level positioning accuracy to satisfy the demands of most GIS applications.
1.2 T8Pro Features
Below is the T8Pro key features: 1.3 Specifications
SYSTEM

COMMUNICATION

CDMA: BCO
EVDO: BCO
WCDMA: B1/B2/85/B8
TD-SCDMA: B34/B39
TDDLTE:
Band38/Band39/Band40/Band41
FDDLTE:
Band1 /Band2/Band3/Band4/Band5/Ba
nd7/Band8/ Band1 7/Band20/Band28
Bluetooth| BT 4.2
SIM Card| Dual SIM & Dual standby
USB| Type C
External Interface| USB, UART, GPIO

GNSS SPECIFICATIONS

– BeiDou: B11, B21, B3I, B1C, B2a
– GLONASS: L1, L2
– Galileo: E1, ESb, E5a
– QZSS: LIC, L2, L5, LIC/A
– Navic: L5
– SBAS: L1, L5
Single Baseline RTK| 8 mm + 1 ppm Horizontal
15 mm + 1 ppm Vertical
Standalone| 1.5m3D RMS

PHYSICAL

Sensor, Gyroscope, OTG

ENVIRONMENTAL

SOFTWARE
Compatible with common third-party GIS and field surveying software, such as ArcGIS Collector, Mapit GIS, FieldGenius Android etc.

1. The helix antenna of T8 Pro is detachable, which can be replaced with geodetic antenna, providing better GNSS signal quality for land surveying solution.

All specifications are subject to change without notice.

Chapter 2 Packing Overview

This section provides overall T8Pro tablet parts list, including basic supplies and customized kits based on yourrequirements.
2.1 Basic supply kit

2.2 Optional Choices

Chapter 3 Installation and Setup

This section shows T8Pro installation in difference work mode, including use the helix antenna and geodetic antenna.
3.1 Helix antenna
Below picture is about how T8Pro connect with Helix antenna. Then can conduct the position collection work after fixed the helix antenna well. Suggest make the antenna head to sky. 3.2 Geodetic antenna
Below shows how T8Pro connect with the geodetic antenna. Use the provided cable make the connections.

Chapter 4 Operation

4.1 SingularPad software
SingularPad can connect to internal OEM board and set work mode directly.
4.1.1 Connection 4.1.2 Set work mode
After connection, it will show a icon in the software as Rover, click and set CORS parameters: IP, Port, User, Password and MountPoint. Finally remember apply it. 4.1.3 Survey and Stakeout
Then the status will get fixed, and you can start your work **4.2 SingularSurv

• High Precision software
  High-Precision software is designed to configure the correction for integrated GNSS board, and also for checking information of the GNSS board, including satellites status, NMEA message, firmware version andmore. Before you start your work with SinglarSurv, you need to get single via High-Precision not SinglarSurv.
  4.2.1 Setup CORS connection or connect to your single Basestation
  –make sure you have put SIM card to the tablet, or connected with WiFi beforesetup.
  Click Setup IP, input the IP address and Port for your server Select MountPoint from the list→ input the account name and password →click CONNECT After CORS configuration you will find the positioning status changed to FIX. And High-Precision software will share the location to the tablet, which means when there has another software requests the location, it will get the high accuracy location. 4.2.2 Check satellites information and NMEA message
  Click Satellites and NMEA to check the corresponding information. 4.2.3 Send command to communicate with the integrated board.
  Input the command for the board, click send command. Here take “log version” as example, you can getthe firmware version information. 4.2.4 SingularSurv Software
  Go SingularSurv, in Connection, select Controller GNSS, and click Connect. Then you can go toTopo Survey to collect points. 4.3 Other 3rd Party GISsoftware**
  For GIS software which supports read the tablet location, all can work by T8 PRO high precision tablet. Blow shows some samples of GIS software.

SingularXYZ intelligent Technology Ltd.
Floor 2, Building A, No. 599 Gaojing Road, 201702 Shanghai, China
**** +86-21-60835489
+86-21-60835497
singulanmyz@singularxyz.com
www.singulamyz.com

References

• ComNav Technology Ltd_ComNav,GNSS OEM Board,GNSS Receiver,GNSS Antenna,Wireless Data Link,Software,Collector

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>