GREENLUX GXLS282 LED Outdoor Ceiling Light Instruction Manual
- June 4, 2024
- GREENLUX
Table of Contents
- GREENLUX GXLS282 LED Outdoor Ceiling Light
- CLASSIFICATION AND ASSIGNMENT
- EXPLANATION OF USED SIGNS AND SYMBOLS
- SAFETY INSTRUCTIONS ASSEMBLY
- INSTALLATION
- DIMENSIONS
- INSTRUCTIONS FOR OPERATION/MAINTENANCE
- ENVIRONMENTAL PROTECTION / INSTRUCTIONS FOR PRODUCT USAGE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GREENLUX GXLS282 LED Outdoor Ceiling Light
CLASSIFICATION AND ASSIGNMENT
Lamp ceiling or wall with built-iņ, user unalterable LED module with integrated power Supply. The product is intended for professional / investment or universally use. It is intended tor indoor and outdoor use.
EXPLANATION OF USED SIGNS AND SYMBOLS
- S1 Nominal voltage, frequency.
- S2 Nominal power output.
- S3 Rated current.
- S4 Second-class protection against electric shock.
- S5 Protection against solid föreign objects bigger than 1,0mm provided. Protection against splashing water provided..
- S6 Amount of light put out by the lamp.
- S7 Colour rendering index.
- S8 Colour temperature range.
- S9 Average lifetime.
- S10 illumination angle.
- S11 Environment of the operating temperature range.
- S12 is Designed to be mounted on the ceiling or wall.
- S13 is intended for indoor and outdoor use.
- S14 is Unsuitable for use with a dimmer.
- S15 Replace cracked or damaged protective cover
- S16 Power factor.
- S17 Maximum power and frequency of emitted radio signal.
- S18 Power consumption in standby mode.
- S19 (SENS) Sensor Range Sensitivity controller.
- S20 (TIME) Controller sétųp time -lighting time (105-3min).
- S21 (LUX) switching regulator sensor depênding on the ambient lighting – mode sensitivity settings night /day (3-2000Lux).
- S22 Detection distance.
- S23 Vertical detection range.
- S24 HorizZontal detection range.
- S25 Be careful, the risk of electric shock.
- S26 Complies with the requirements of the CE conformity assessment for safe application within the European Union.
- S27 Complies with the requirements of the RoHS (Restriction of Hazardous Substances) directive according to ĘU regulations
- 01-02 Please consult the section ENVIRONMENTAL PROTECTION.
SAFETY INSTRUCTIONS ASSEMBLY
- Prior to beginning the installation, familiarise yourself with the manual.
- Installation and applicability assessment for the specific conditions need to be carried out by appropriately qualified personnel.
- The product may not be installed on the surface or near flammable materials or objęcts, combustibles, etc. It is necessary to adhere to fire protection measures.”
- The product can not be used in an environment with gas, biogas, chemical fumes, chemicals and similar conditions affecting safety, product functionality and fire protection.
- Protect the product from exçessive hęat, particularly during mounting on the ceiling under the roof, or against overheating due to the effect of other heaters, ventilation, pumps etc
- The product is suitable for mounting on flammable surfaces (the surface does not ignite, eg. Concrete, plaster, metal) nõrmally flammable (the flash point is at least equal to 200° C when no softening or deformation due to the temperature e.g. wood and wo0d materials, With a thickness greater than 2 mm)
- Recommended ideal instăllation height is 2,5 to 3,5 meters. It is necessary to take Into account that the correct function of the sensor IS influenced by many external tactors: In the vicinity of the sensor should be no differences in temperature air (eg exhaust ventilation, radiator vents, etc.) Excessive movement objects in the vicinity (Such as swaying trees) Direct or intense reflected light falling on the sensor. Switching of other electriçal equipment close to the sensors and the like.
- Any activity during the installation, operation, adjustment or maintenance of the lamp must be performed after disconnecting the power supply. Must be avoided involvement Fixtures another person.
- During the assembly and installation, it is necessary to adhere to the procedures in the drawings.
- Prior to first use, it is necessary to make sure that the mechanical attachment, electrical connection and conditions of use are in order.
INSTALLATION
DIMENSIONS
INSTRUCTIONS FOR OPERATION/MAINTENANCE
- The product may be heated to a higher operating temperature. The product must not be covered over and overheating operating temperature affect other heat sources.
- The product should not be used with a cracked or broken cover (diffuser) or without him. It is necessary to immediately replace the cracked cover. If the cover is not fixed must be light disconnected from the network and not used.
- Fixtures for cleaning Do not use chemical agents disturbing material lamps.
- The light source in this luminaire may only be replaced by the manufacturer or his Contract techniçian or a similarly qualified person.
- This product has some featurès its own, which are manifested in that the product has a higher sensitivity when objects move across the field of view of the sensor than after -in its direction. Optimum sensitivity is of objeçts moving at a speed of 0.6 to 1.5 m/s. A slight decrease in sensitivity may also occur during operation at temperatures in extreme operating temperatures within the vicinity.
ENVIRONMENTAL PROTECTION / INSTRUCTIONS FOR PRODUCT USAGE
01 Pay attention to cleanliness, environmental protection and waste
management.
02 The product designation is to be presented for the purpose of managed
disposal-collęction of electrical and electronic equipment. These products are
not to be disposed of along with common or other waste, under penalty of a
fine. These products may be harmful to the environment and human health and
require further forms of processing, espeçially via recycling or disposal.
Products with this marking must be delivered to a collection point for
electrical and elęctroniç equipment. Information regarding collection points
for these products is provided by local authorities or vendors of this type of
goods. When its lifetime is over, the equipment can also be turned over to the
vendor when buying a new product, provided the quantity returned is not
greater than the quantity purchased for the same type of equipment. No changes
or technical modificațions are acceptable. Otherwise, all responsibilities are
transferred to the person performing such changes. Failure to abide by this
manual can cause fire, burning, electric shock, physical injuries, and other
material or immaterial damage. The supplier is not responsible in any way for
the consequences of failing to abide by the recommendations provided via this
manual, including improper assembly or installation, operation, insufficient
maintenance and supervision during usage, or other consequences among others
the place and method of usage. We recommend that you keep this manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>