RUGGED RIDGE 11540 XHD Double X Striker Installation Guide
- June 15, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 11540 XHD Double X Striker
Product Information
The Rugged Ridge XHD Double X Striker is a heavy-duty accessory designed to enhance the functionality and durability of your vehicle. It is specifically designed for vehicle self-recovery purposes and should not be used as a towing point. The Striker Bar s not intended for towing or vehicle recovery.
Specifications :
- Model : Rugged Ridge XHD Double X Striker
- Working Load Limit : 6.5 tons
- Material : High-strength steel
- Color: Black
Product Usage Instructions:
Section 1: Adding Double X Striker to an Existing Installation
- Ensure that the D-Rings and any top or front mounted accessories are removed from the center section.
- Place the Double X Striker over the center section, ensuringthat it sits on the frame rails but is not yet attached.
- Secure the Double X Striker with the provided 8 top bolts andwashers. Do not tighten the bolts at this stage.
Section 2: Installing the Front Bolts
- Install the front 8 bolts and washers provided with the center section. Do not tighten the bolts yet.
- Ensure that all 16 bolts have been started.
Section 3: Finalizing the Installation
- Tighten the front 8 bolts first, followed by the top 8 bolts.
- Verify that the installation is secure and all bolts are tightened properly.
- The installation is now complete.
FAQ
Q: Can I use the D-Ring mounts for towing?
A: No, the D-Ring mounts should only be used to assist in vehicle self- recovery. They are not designed for towing purposes.
Q: What should I do if the Striker Bar is damaged or distorted?
A: If the Striker Bar is damaged or distorted, it should be replaced before use. Continuing to use a damaged or distorted Striker Bar may result in serious injury.
Q: Where can I find warranty information for the product?
A: For warranty information, please visit the official website at www .Omix-Ada.com.
Contents
• Double X Striker (1)
WARNING
To avoid serious injury: never exceed 6.5 ton working load on D-Ring mounts. Use only to assist in vehicle self-recovery; never use D-Ring mounts as towing point. Inspect before use. Replace if damaged or distorted. Striker Bar is not to be used for towing or vehicle recovery.
- If Double X Striker is being added to an existing installation; remove D-Rings and/or any top or front mounted accesoires from center section. Center section should be sitting on frame rails but not attached.
- Place Double X Striker over center section and secure with 8 top bolts and washers (provided with center section). Do not tighten bolts.
- Install front 8 bolts and washers (provided with center section). Do not tighten bolts.
- Once all 16 bolts have been started, tighten the front 8 bolts, followed by the top 8 bolts. Installation is now complete.
- OMIX-ADA® TECHNICAL SUPPORT
- PHONE: M-F 8am – 5pm EST 1-800-449-6649 |
- EMAIL: techsupport@omix-ada.com
WARRANTY
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>