bo-camp 2200500 Espresso Makers Instructions
- June 15, 2024
- bo-camp
Table of Contents
bo-camp 2200500 Espresso Makers
ESPRESSO MAKERS
Specifications
Product Codes| 2200500, 2200510, 2200515, 2200518, 2200519, 2200520, 2200522, 2200526
Image Description The image shows several components of an espresso
maker. These include a black, cylindrical part with a handle, a filter basket
with coffee grounds, and a filter holder with a spout.
The parts appear to be designed for assembly into a complete espresso maker,
used for brewing coffee.
FAQ
What should I do if the espresso maker starts to sputter?
- Once the espresso maker starts to sputter, you should wait until the sputtering stops, indicating that the coffee is ready.
Is the handle on the espresso maker heat-resistant?
- Yes, the handle is heat-resistant. However, you should not allow high flames to touch the handle for extended periods to prevent damage.
How do I determine the correct amount of water and coffee to use in the espresso maker?
- You should fill the lower part with the desired amount of water, not exceeding the overpressure valve, and fill the filter with ground coffee in proportion to the water volume and your desired coffee strength.
Usage
- Turn off the top part.
- Fill the lower part with water as wanted, but not more than the overpressure valve.
- Fill the filter inner part withcoffee, in ratio to the amount of water and desired strength of the coffee.
- Replace the top part and put the perculator on a heat source until the sputter stops.
- The handle is heat resistant, but do not let high flames around the perculator touch the handle for longer time.
- BO-CAMP.COM
Documents / Resources
| bo-
camp 2200500 Espresso
Makers
[pdf] Instructions
2200500, 2200510, 2200515, 2200518, 2200519, 2200520, 2200522, 2200526,
2200500 Espresso Makers, 2200500, Espresso Makers, Makers
---|---