Bear LLJ-B12K1 Countertop Blender User Manual

: June 15, 2024
: BEAR

Table of Contents

Bear’s Words
Package Contents
Diagram
Operation Guide
Cleaning & Maintenance:
Safety Precautions
Troubleshooting
Correct Disposal of This Product
Warranty and Customer Service
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Bear LLJ-B12K1 Countertop Blender

Bear’s Words

If you love delicious smoothies, shakes or juice, Bear Countertop Blender is the best choice you need in your kitchen. This blender makes quick work of crushing ice and blending frozen fruit, leaving you with delicious drinks any time you desire.
Thank you for choosing Bear Countertop Blender. Please read the following instructions carefully before use!

Package Contents

Blender Cup with Blade Assembly ***1

**

Blender Base Unit ***1

**

User Manual ***1

**

Diagram

Measuring Cup
Cover
Blender Cup
Seal for Blade Base
Blade Base
Blender Base Unit
Knob Button

**Marked of Blender Cup

**

Knob Button

Pulse Function: Use for cleaning or crushing ice.

“O” Function: Turn off the blender and stop blending.
“1” Function: Low speed blending.
“2” Function: High speed blending.

Operation Guide

Assembly and Check
Ensure that waterproof sealing is in the blade base to avoid spilling or cases which machine does not work.
Put the blade base on the bottom of blender cup, and then turn clockwise to lock it.
Prepare for the ingredients and cut into less than 0.8inch pieces. Then put into the blender cup and close the cover and measuring cup.
Put the blender cup into the base unit and turn it clockwise to tighten it.
Connect to the rated power supply and set the speed by the knob button at your favor.
Set the speed to “O” after use, and unplug. Then pull out the juice or smoothies to enjoy.

Note:

Water level should not exceed the MAX 1200ml marking line
The ingredients should not be over 0.8inch to avoid cases in which food is hard to blend.
Please close the cover of blender cup and the blade base properly to avoid spillage of the ingredients.
Do not run it continuously for longer than 1 min. Then wait for 2 mins when the process completes as a cycle.
Please wait for 15-20 mins after operating 3 cycles.
Please switch off the blender if food is to be added during operation through measuring cup.

Cleaning & Maintenance:

Unplug the appliance before cleaning.
The blades are very sharp. Please pay special attention while cleaning to avoid being hurt.
After use, please clean the blender cup and blade base in a timely manner, and then dry them after washing.
The outside of blender base can be wiped with a wet towel.
DO NOT immerse the blender base into water or rinse it with water or other liquids.
Rinse and clean the interior of the blender cup and wipe the exterior and the base of the cup with a piece of mildly damp cloth.
The cover can be put into water to clean. Neutral detergent may be used while cleaning if necessary.
Never use steel balls, abrasive cleaners or corrosive liquids such as benzine or acetone to clean the product.
After cleaning, please let all the accessories dry completely before re-assembling onto the machine and then start operation. This product should be stored in a dry place.
D0 NOT wash this unit by dishwasher or dish dryer.

Safety Precautions

The input voltage of this product is 120V, please confirm it before use.
Please make sure the product is assembled properly before using.
lt is forbidden to use the blender without water, so as to prevent the local high temperature caused by high rotation speed from burning the waterproof sealing ring.
Make sure to disconnect the power cord before disassembling or moving any parts of the product.
lf the power cord is damaged, DO NOT disassemble and repair it yourself to avoid danger.
Check all parts for damage before use. Please stop using the product and contact the after-sales service department in time if damage is found.
This product is for home use only.
The blades are sharp, please pay attention to it when removing or cleaning.
lf the machine is stuck in food and automatically shut down during use, tum off the power, remove the blade base, and clean the jammed food. Please wait for 20-30 mins for cooling down.
DO NOT put too hot ingredients (MAX 5o·c;14o’F) into the cup to avoid deformation and damage of the cup.
DO NOT use the unit under the high temperature environment of nearby the stove. Otherwise, the unit may stop working.
Please do not put your hands or others in the jar when operating to avoid accident.

Troubleshooting

Question	Possible Reason	Suggested Solution
Not working/ no power	No power supply	Check the power supply
Power cord, plug or socket damaged, or they are not well connected.	Check the

status of plug and socket.
Make sure they are well connected.
Cup and base unit are not install properly| Assembly properly
Auto-shut
off while operating| Abnormal voltage overheat| check if the voltage of power Supply too high or too low
Check if the plug/socket are
Check if the SOCket overload or extend socket damaged.
Bad smell when using| It is a normal situation for the first few usage| It there are Still unpleasant smells after repeated use.
please send them to the maintenance location for inspection
cup leaking| Check if the blender cup and the measuring cup are tightened| Tighten the cup and measuring cup
the cup is broken| Change the blender cup
if forgetting install the sealing| place the sealing and keep it steady

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)
This Marking shown on the product or its literature , indicate that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

Warranty and Customer Service

If you are in any way dissatisfied with this product kindly return ship it to Amazon in its original box for a full replacement or refund.
All parts and materials are guaranteed for a one year period from date of purchase, against malfunction or defects in materials or workmanship.
All enquires may be addressed to Bearwarranty@bears.com.cn and we shall respond to you as soon as possible.
If you appreciate and love our products, please stay connected with us. More surprises may be found at .