Honeywell HCE840C Ceramic Heater User Manaul

Honeywell HCE840C Ceramic Heater

IMPORTANT SAFETY INSTRUCTIONS

WARNING – READ AND SAVE THIS OPERATING AND SAFETY INSTRUCTION BEFORE USING THIS HEATER. IF YOU DO NOT UNDERSTAND THESE INSTRUCTIONS OR PRODUCT LABELS PLEASE CALL OUR CUSTOMER REPRESENTATIVES AT 800-477-0457 FOR ASSISTANCE BEFORE USING THIS PRODUCT.
Warning – Failure to follow any of these safety instructions could result in fire, injury or death.

YOUR RESPONSIBILITIES
Electrical appliances may expose people to hazards that can cause severe injury as well as death. The use of electrical products may create hazards that include, but are not limited to, injury, fire, electrical shock and electrical system damage. These instructions are intended to provide you with the information you need to use the product correctly and to avoid such hazards. When using electrical appliances, basicb precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons including the following:

1. Warning – Read all instructions before using this heater.
2. Warning – This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from all sides of the heater.
3. Warning – Extreme caution is necessary when any heater is used by or near children or invalids, and whenever the heater is left operating and unattended.
4. Warning – Always unplug heater when not in use.
5. Warning – DO NOT operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater or return heater to authorized service facility for examination and/or repair.
6. Warning – For residential use only.
7. Warning – DO NOT use outdoors.
8. Warning – This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
9. Warning – DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. DO NOT route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
10. Warning – This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
11. Warning – This heater draws 12.5 amps during operation. To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working.
12. Warning – It is normal for the plug to feel warm to the touch; however, a loose fitbetween the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
13. Warning – To disconnect the heater, first turn off the product, then grip the plug body and pull it from the wall outlet. Never pull by the cord.
14. Warning – DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
15. Warning – To prevent a possible fire, do not block air intakes or exhaust in any manner. DO NOT use on soft surfaces, like a bed, or where openings may become blocked.
16. Warning – A heater has hot and arcing or sparking parts inside. DO NOT use it in areas where gasoline, paint or flammable liquids are used or stored.
17. Warning – Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
18. Warning – Always plug heater directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
19. Warning – Never tamper with this product or attempt to fix it. Any tampering with, or modification of this product can result in serious injury, death, or fire. Risk of electric shock. DO NOT open. There are no user serviceable parts inside.
20. Warning – DO NOT remove product labels that contain warnings or safety instruction.
21. Caution – The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.
22. Caution – Before cleaning, or storage, or when not in use, turn the product’s controls to the OFF position and unplug the heater from the electrical outlet and allow to cool.
23. Caution – Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9 m) away from any combustible materials. DO NOT use on an unstable surface such as bedding or deep carpeting. Be sure the heater is not in a position where it may be tripped over by small children or pets.
24. Caution – If your home has aluminum wiring have a licensed electrician check your receptacle’s connections. When using a 1500 watt heater, aluminum wire connections can cause a safety issue.
25. SAVE THESE INSTRUCTIONS

ABOUT CERAMIC TECHNOLOGY

• Ceramic heaters generate heat by passing electricity through heating wires embedded in ceramic plates.
• In the Honeywell HeatGeniusTM Ceramic Heater, air is drawn into the back of the heater by two fans, through the ceramic elements and out the front of the heater to gently introduce warm air into the room.
• This type of heating technology provides consistent, even heating.
• For best results, place heater on the floor and allow heater to run for 5-10 minutes to reach maximum heat output.

SET UP

• The Honeywell HeatGeniusTM Ceramic Heater requires no assembly. Simply unpack heater and save all packaging materials for off-season storage.
• Place the heater on a firm, level, open surface, free from obstructions and at least 3 feet (0.9m) away from any wall or combustible material.
• DO NOT use on an unstable surface such as bedding or deep carpeting.
• BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE TRIPPED OVER BY CHILDREN OR PETS.

MOVING THE HEATER

• Turn off the heater.
• Allow it to cool for ten minutes.
• Unplug heater and move it to desired location. This heater is equipped with a Cool Touch handle for your convenience.

OPERATION

NOTE : NEVER LEAVE AN OPERATING UNIT UNATTENDED

• With heater in the OFF position ( ), plug the heater into a polarized 120V outlet. DO NOT FORCE THE
  POLARIZED PLUG INTO THE OUTLET; it will only fit one way.

• The Honeywell HeatGeniusTM Ceramic Heater is designed to be placed at least 3 feet away from the wall, allowing for convection room heating and safer operation.

• Turn heater on by pressing the Power Button ( ).The Power Indicator will light and the heater will start in the Constant HI Room Setting (Hi).

• NOTE : Because the Low settings do not require as much electricity to operate, they are more energy efficient and may be a better option if you are concerned about saving energy.

• When done using this appliance, make sure to manually turn the heater OFF.

• To shut the heater off, press the Power Button ( ) and the heater will begin Powering Down. The heater will shut off after counting down 6 seconds in the Temperature Display to cool down the internal components.

• See next section for overview of heat settings.

6 HEAT SETTINGS THAT GIVE YOU CONTROL OF YOUR COMFORT

6 Ways to Heat the Space You are In – Once your heater is ON, use the control buttons on the bottom to select the desired heat setting for your needs. Your heater will start on the Constant Hi Room heat setting each time you turn the heater on. Here is a handy reference to help select the heat option that best suits your desired comfort level:

• FLOOR AREA – (LOW HEAT)
  This setting uses the lower level heating element only to provide a comfortable, gentle heat to warm up the floor area in front of the heater.

• PERSONAL – (MODERATE HEAT)
  This setting uses a moderate heat level to warm you personally wherever you may be relaxing (reading, watching TV, etc.). The LO option ( ) provides a soothing heat level, while the HI option ( ) slightly increases heat output, allowing you to adjust to your desired comfort level.

• ROOM – (MODERATE-HIGH HEAT)
  Best for whole room heating, use this setting to bring warmth to cooler, drafty rooms. The LO option provides a moderate heat level, while the HI option uses maximum heat output to create a warmer environment.

• THERMOSTAT – (MODERATE-HIGH HEAT)
  To set the Thermostat, press the Thermostat Control Buttons ( ) to choose your Desired Temperature. The Desired Temperature will flash five times and then the Current Temperature in the room will display as a steady number. The Thermostat can operate on either HI or LO heat levels to achieve

• Desired Temperature by pressing the ( ) button under Room.

• NOTE: If the Current Temperature is higher than your Desired Temperature, the heater will go into cool-down mode and then shut-off until the room temperature falls below this setting or until the Desired Temperature is changed.

• HEATPHASE™ TIMER
  The new HeatPhase Timer is an auto-off feature that gradually transitions the room temperature from warmer to cooler. The timer starts at high heat and steps down 4 different heat levels until it shuts off – over a 2-hour period. This feature is ideal for setting a comfortable, relaxing environment. (Fig.

2. The timer can also be toggled to start at whichever level is desired.

• QUIET MODE
  The new Quiet Mode features uses a low heat setting and fan speed to produce a gentle “white noise” and soothing warmth. (Fig. 3)

SAFETY FEATURES

• The Honeywell HeatGeniusTM Ceramic Heater is equipped with several devices and features for added protection:
• A four-way tip-over switch that disables the heater if it is accidentally tipped in any direction. If tipped over, the unit should be set upright and follow the OPERATION instructions.
• A high-temperature safety control prevents overheating. If activated, unplug the device and wait at least 10 minutes for the unit to cool. Then plug the heater back in and follow the OPERATION instructions.
• The heater is also equipped with a thermal cut-off fuse that will permanently shut down the heater should it operate at a higher-than-normal temperature. If activated, the unit will need to be replaced.
• This heater was created using high-quality, heat-resistant plastics and has a Cool Touch handle.

FAHRENHEIT TO CELSIUS

Press and hold both Thermostat Control Buttons ( ) for three seconds to change between Fahrenheit and Celsius and back.

CLEANING AND STORAGE

• It is recommended that the Honeywell HeatGeniusTM Ceramic Heater be cleaned at least once a month and before off-season storage.
• Turn Off ( ) and unplug the heater. Allow unit to cool.
• Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES, POLISHES OR ANY CHEMICAL SOLUTION.
• Before storing, clean the Ceramic Heater using the above-mentioned steps. Wrap the cord around the unit. Place in its original box and store it in a cool, dry place.
• This heater does not disassemble.

TROUBLESHOOTING

Problem
If your Honeywell HeatGenius Ceramic Heater shuts off unexpectedly or fails to operate, one of your heater safety features may have been activated to prevent overheating.

Solution

• Be sure it is plugged in and that the electrical outlet is working.
• Check for any obstructions. If you find an obstruction, turn the heater OFF ( ) and unplug it.
• Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then re-plug the heater in and follow the OPERATION instructions.

PRODUCT SPECIFICATIONS

3-YEAR LIMITED WARRANTY

YOU SHOULD FIRST READ ALL INSTRUCTIONS BEFORE ATTEMPTING TO USE THIS PRODUCT.

1. This 3 year limited warranty applies to repair or replacement of product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. KAZ IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase.
2. At its option, Kaz will repair or replace this product if it is found to be defective in material or workmanship.
3. This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not by the instruction manual.

Customer Service

• Questions or comments

• Call us toll-free at: 1-800-477-0457

• E-mail : consumerrelations@kaz.com

• Or visit our website at: www.HoneywellPluggedIn.com/heaters
  Please be sure to specify a model number.

• NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY. DO NOT RETURN THE PRODUCT TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY.

FAQs

Question: What is the Honeywell HCE840C Ceramic Heater?

Answer: The Honeywell HCE840C Ceramic Heater is a portable heating device designed to provide efficient warmth and comfort in small to medium-sized rooms.

Question: Can the Honeywell HCE840C Ceramic Heater be used as a fan?

Answer: Yes, it has a fan-only mode that allows you to use it as a cooling fan during the warmer months.

Question: How does the Honeywell HCE840C Ceramic Heater work?

Answer: This heater uses ceramic heating elements to generate heat. When you turn it on, it warms up the ceramic plates, which then radiate heat into the room.

Question: What are the different heat settings available in the Honeywell HCE840C Ceramic Heater?

Answer: The Honeywell HCE840C offers two heat settings: Low Heat and High Heat, allowing you to customize your comfort.

Question: What are the key features of the Honeywell HCE840C Ceramic Heater?

Answer: The key features include adjustable thermostat settings, multiple heat settings, a safety tip-over switch, overheat protection, and a cool-touch housing for safety.

Question: How does the adjustable thermostat work in the Honeywell HCE840C Ceramic Heater?

Answer: You can set your desired temperature using the adjustable thermostat, and the heater will maintain that temperature by cycling on and off as needed.

Question: What is the maximum heating power of the Honeywell HCE840C Ceramic Heater?

Answer: The heater has a maximum power output of 1500 watts.

Question: Is the Honeywell HCE840C Ceramic Heater energy-efficient?

Answer: Yes, it is designed to be energy-efficient, thanks to its ceramic heating elements and thermostat control.

Question: Does the Honeywell HCE840C Ceramic Heater have a timer function?

Answer: No, it does not have a built-in timer function.

Question: What safety features are included in the Honeywell HCE840C Ceramic Heater?

Answer: It has a safety tip-over switch, which shuts off the heater if it's accidentally knocked over, as well as overheat protection to prevent overheating.

Question: Is the Honeywell HCE840C Ceramic Heater suitable for use in bedrooms?

Answer: Yes, it's a good choice for bedrooms due to its safety features, quiet operation, and adjustable thermostat for customized comfort.

Question: Can the Honeywell HCE840C Ceramic Heater be used in a bathroom?

Answer: It is not recommended for bathroom use as it is not designed to be used in damp environments. It's best suited for dry indoor spaces.

Video- Honeywell HCE840B HeatGenius Ceramic Heater Black Energy Efficient

1500 Watt Custom Comfort with 6

Download This Manual PDF:Honeywell HCE840C Ceramic Heater User Manaul

Reference Link

Honeywell HCE840C Ceramic Heater User Manaul- Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>