Seagate ST1000VM002 Pipeline HD Internal Hard Drive User Manual
- June 15, 2024
- Seagate
Table of Contents
Seagate ST1000VM002 Pipeline HD Internal Hard Drive
Introduction
This manual describes the functional, mechanical, and interface specifications for the following Seagate Pipeline HD® SATA model drives:
- ST2000VM003
- ST1000VM002
These drives provide the following key features:
- 5900 RPM spindle speed
- High instantaneous (burst) data-transfer rates with a default of 6Gb/s for ST1000VM002 and ST2000VM003 models. Limit settings for 1.5Gb/s and 3.0Gb/s are available via S.M.A.R.T. Command Transport command.
- Support for S.M.A.R.T. drive monitoring and reporting
- Perpendicular recording, Tunneling Magnetoresistive (TMR) recording heads, and EPRML technology, for increased areal density
- State-of-the-art cache and on-the-fly error-correction algorithms
- Native Command Queueing with command ordering to increase performance in demanding applications
- Full-track multiple-sector transfer capability without local processor intervention
- Quiet operation
- Compliant with RoHS requirements in China and Europe
- SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
- Supports latching SATA cables and connectors
- Worldwide Name (WWN) capability uniquely identifies the drive.
- Supports Trusted Send/Receive Security Protocol
- Reliability for 24×7 video applications
- Supports ATA8 streaming commands
- Supports power-up in the standby feature
- Supports Trusted Send/Receive Security Protocol
- Performance-tuned for seamless video applications
- Built-in error recovery for non-stop video streaming
- Best-in-class acoustic performance means virtually silent operation
- Enhanced caching capabilities enable superior video recording quality.
About the Serial ATA Interface
The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include:
- Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jumpers or other configuration options.
- Thinner and more flexible cabling for improved enclosure airflow and ease of installation.
- Scalability to higher performance levels.
In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disk drive in your current system and expect all of your existing applications to work as normal.
The Serial ATA interface connects each disk drive in a point-to-point configuration with the Serial ATA host adapter. There is no master/slave relationship with Serial ATA devices like there is with parallel ATA. If two drives are attached on one Serial ATA host adapter, the host operating system views the two devices as if they were both “masters” on two separate ports. This essentially means both drives behave as if they are Device 0 (master) devices.
Note: The host adapter may, optionally, emulate a master/slave environment to host software where two devices on separate Serial ATA ports are represented to host software as a Device 0 (master) and Device 1 (slave) accessed at the same set of host bus addresses. A host adapter that emulates a master/slave environment manages two sets of shadow registers. This is not a typical Serial ATA environment.
The Serial ATA host adapter and drive share the function of emulating parallel ATA device behavior to provide backward compatibility with existing host systems and software. The Command and Control Block registers, PIO and DMA data transfers, resets, and interrupts are all emulated.The Serial ATA host adapter contains a set of registers that shadow the contents of the traditional device registers, referred to as the Shadow Register Block. All Serial ATA devices behave like Device 0 devices. For additional information about how Serial ATA emulates parallel ATA, refer to the “Serial ATA International Organization: Serial ATA Revision 3.0”. The specification can be downloaded from www.sata-io.org.
Drive Specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models:
- ST2000VM003
- ST1000VM002
Specification summary tables
The specifications listed in the following tables are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual.
Table 1 Drive specifications summary for 2TB and 1TB models
| Drive Specification | ST2000VM003 | ST1000VM002 |
|---|---|---|
| Formatted capacity (4K/sector)* | 2000GB (2TB) | 1000GB (1TB) |
| Guaranteed sectors | 3,907,029,168 | 1,953,525,168 |
| Heads | 4 | 2 |
| Disks | 2 | 1 |
| Bytes per sector (4K/512 bytes per sector emulated at the interface) | 4K | 4K |
| Default sectors per track | 63 | 63 |
| Default read/write heads | 16 | 16 |
| Default cylinders | 16,383 | 16,383 |
| Recording density (max) | 1807kFCI | 1807kFCI |
| Track density (avg) | 352ktracks/in | 352ktracks/in |
| Areal density (avg) | 625Gfc/in2 | 625Gfc/in2 |
| Spindle speed | 5900 RPM | 5900 RPM |
| Internal data transfer rate (max) | 2147Mb/s | 2147Mb/s |
| Sustained data transfer rate OD | 159MB/s | 159MB/s |
| I/O data-transfer rate | 600MB/s | 600MB/s |
| ATA data-transfer modes supported | PIO modes: 0 to 4 | PIO modes: 0 to 4 |
| Multiword DMA modes: 0 to 2 | Multiword DMA modes: 0 to 2 | |
| Ultra DMA modes: 0 to 6 | Ultra DMA modes: 0 to 6 | |
| Cache buffer | 64MB | 64MB |
| Height (max) | 26.1mm / 1.028 in | 20.20mm/ 0.795 in |
| Width (max) | 101.6mm / 4.0 in | 101.6mm / 4.0 in |
| (± 0.010 in) | (± 0.010 in) | |
| Length (max) | 147.00mm / 5.78 in | 147.00mm / 5.78 in |
| Weight (typical) | 535g / 1.18 lb | 415g/ 0.915 lb |
| Average latency | 5.1ms | 5.1ms |
| Power-on to ready (max) | <17s | <6s |
For Specifications and Datasheet, please visit https://manuals.plus/seagate /seagate-st1000vm002-pipeline-hd-internal-hard-drive-specifications-and- datasheet
Frequently Asked Questions
What is the Annualized Failure Rate (AFR) for the Seagate ST1000VM002 Pipeline HD Internal Hard Drive?
The AFR for the Seagate ST1000VM002 Pipeline HD Internal Hard Drive is 0.55% when operated in an environment with ambient air temperatures of 25°C. However, operating at temperatures outside the specified range may increase the AFR.
How can I determine the warranty for my Seagate ST1000VM002 Pipeline HD Internal Hard Drive?
What is the purpose of the Pipeline HD Internal Hard Drive (ST1000VM002), and what applications is it suitable for?
The Seagate Pipeline HD Internal Hard Drive (ST1000VM002) is designed for 24×7 video applications. It is suitable for use in applications where reliability and continuous video streaming are essential, such as surveillance systems, digital video recorders (DVRs), and media storage.
Does the Seagate ST1000VM002 drive support hotplug operation per the Serial ATA Revision 3.0 specification?
Yes, the Seagate ST1000VM002 Pipeline HD Internal Hard Drive supports hotplug operation per the Serial ATA Revision 3.0 specification. This means you can connect and disconnect the drive while the system is running without the need to reboot.
Can I use Seagate ST1000VM002 hard drive for regular data storage and computing tasks, or is it primarily intended for video applications?
While the drive is optimized for video applications, you can still use it for regular data storage and computing tasks. It offers reliable performance and can handle various types of data, but its design and features make it particularly well-suited for continuous video streaming.
What should I do if I encounter nonrecoverable read errors while using the Seagate ST1000VM002 drive?
Nonrecoverable read errors are relatively rare, but if you encounter them, it's advisable to back up your data as soon as possible. These errors may indicate potential issues with the drive's data integrity. If the errors persist, you should consider replacing the drive or seeking technical support.
Can I use the Seagate ST1000VM002 Pipeline HD Internal Hard Drive in a RAID configuration?
Yes, you can use this hard drive in a RAID (Redundant Array of Independent Disks) configuration. It is compatible with various RAID levels, including RAID 0, RAID 1, RAID 5, and more. However, for best results, it's recommended to use drives with similar specifications and capacities in a RAID array.
Does Seagate ST1000VM002 hard drive come with any diagnostic or management software for monitoring its health and performance?
Yes, the drive supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology), which allows you to monitor its health and performance using compatible diagnostic software. Seagate also provides SeaTools, a diagnostic tool that can perform drive self-tests and provide information about the drive's condition.
Can I install Seagate ST1000VM002 hard drive in a desktop computer, or is it specifically designed for use in surveillance systems and DVRs?
You can install the Seagate ST1000VM002 Pipeline HD Internal Hard Drive in a desktop computer. While it is optimized for video applications, it is a standard SATA hard drive and can be used in a variety of computing environments, including desktop PCs.
Is Seagate ST1000VM002 hard drive compatible with both Windows and macOS operating systems?
Yes, the Seagate ST1000VM002 Pipeline HD Internal Hard Drive is compatible with both Windows and macOS operating systems. You can use it as primary storage, secondary storage, or for data backup on systems running these operating systems.
What is the RPM (Revolutions Per Minute) of the Seagate Pipeline HD Internal Hard Drive (ST1000VM002), and how does it impact performance?
The Seagate Pipeline HD Internal Hard Drive operates at a speed of 5900 RPM (Revolutions Per Minute). RPM affects the drive's data access speed and overall performance. While it may not be as fast as drives with higher RPM (e.g., 7200 RPM or 10,000 RPM), it is suitable for video streaming and surveillance applications where sustained data transfer is crucial.
Can I use Seagate ST1000VM002 hard drive for storing multimedia content such as videos, music, and photos?
Yes, you can use the Seagate ST1000VM002 Pipeline HD Internal Hard Drive to store multimedia content. It is suitable for storing a wide range of digital media files, including videos, music, photos, and more. Its large capacity and reliability make it a good choice for multimedia storage.
User Manual
Reference:Seagate ST1000VM002 Pipeline HD User Manual- device.report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>