DOMETIC SB39544 Bezel Kit Instruction Manual
- June 15, 2024
- Dometic
Table of Contents
DOMETIC SB39544 Bezel Kit
NOTICE
Installer: These instructions contain important safety information and
must be forwarded to the boat owner.
- Fully install the helm mounting plate (item 1) and helm by instructions packed with the helm.
- Slide the bezel (item 2) over the shaft and retain it in place with two screws (item 3).
- Insert the key (item 4) in the slot on the shaft, and push the steering wheel firmly onto the shaft.
- Retain the steering wheel in place with the washer (item 5) and lock nut (item 6).
CAUTION!
The steering wheel should fit snugly on the key. To avoid damage to the helm,
do not hammer into position.
Parts Description
| Item | Description | Qty. |
|---|
**1***
2
3
4
5
6
**7***
**8***
**9***
**10***
**11***
| Mounting Plate Bezel
Screw, #8–32 x 1” Long, Self Tap
Woodruff Key Washer, 1/2” ID Locknut, 12”–20
Bolt, 1/4”–20 x 2-1/8” Long Locknut, 1/4”–20
Washer, 1” OD
Bolt, 1/4”–20 x 1” Long, Lock Patch
Washer, 1/2” ID
| 1
1
2
1
1
1
3
3
3
3
3
NOTICE: Keep these instructions with your boat for future reference.
These items were installed by instructions packed with the helm (ref. IS-
SH5210/15 for SB39526, and IS-SH5230/35 for SB39544)
-
YOUR LOCAL DEALER
dometic.com/dealer -
YOUR LOCAL SUPPORT
dometic.com/contact -
YOUR LOCAL SALES OFFICE
dometic.com/sales-offices -
A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of:
DOMETIC GROUP AB
Hemvärnsgatan 15 SE-17154 Solna Sweden