BD 250PSI 68RFE Line Pressure Module Installation Guide
- June 15, 2024
- BD
Table of Contents
BD 250PSI 68RFE Line Pressure Module
Product Information
Specifications
- Product Name: 1030369 Line Pressure Module
- Model Number: I-00228
- Compatible Vehicle: 2007-2018 6.7L
- Pressure Options:
- 250 PSI – Kit #1030369
- 220 PSI – Kit #1030366
Kit Contents
Kit #1030369 (2007-2018 6.7L 250psi)
- 68RFE 250psi Pressure Module – Quantity: 1
- Tie Wrap – Quantity: 8
- Yellow Dot – Quantity: 6
Kit #1030366 (2007-18 6.7L 220psi)
- 68RFE 220psi Pressure Module – Quantity: 1
- Tie Wrap – Quantity: 8
- Yellow Dot – Quantity: 6
Product Usage Instructions
Line Pressure Module Installation
- Before installation, ensure you have all the parts listed in the kit.
- Locate the Line Pressure Sensor and the OEM harness.
- Connect the BD pressure module inline between the Line Pressure Sensor and the OEM harness.
- Secure the BD module to the OEM harness using the provided tie wraps.
- Route the MAP sensor wire over the transmission and to the back of the intake horn.
- Connect the MAP sensor wire in line with the factory MAP sensor.
- Secure the wiring harness with the supplied tie wraps, keeping it away from moving parts like the steering shaft or front drive shaft.
- Ensure all connections are fully mated and have clicked together.
FAQ
-
Q: Where can I download the color install manuals?
A: You can download the color install manuals at www.bddiesel.com. -
Q: What are the pressure options for this line pressure module?
A: The line pressure module offers two pressure options: 250 PSI (Kit1030369) and 220 PSI (Kit #1030366).
-
Q: How many tie wraps are included in each kit?
A: Each kit includes 8 tie wraps for securing the pressure module and wiring harness.
KIT CONTENTS
Please check you have all the parts listed before you begin installation.
Module Operation
The BD 68RFE Line Pressure Module increases line pressure above stock levels to aid in holding applied transmission clutches and prevent clutch slipping. Stock line pressure varies between 60-160psi, with the 1600368 module installed the range becomes 60-250psi. With the 1600370 module installed the range becomes 60-220psi. At low load situations, the module will not command any additional pressure, but as the engine boost rises (and power output increases) the module will increase the line pressure to 250psi/220psi depending on the module.
Module installation
Connect the BD pressure module inline between the Line Pressure Sensor and the OEM harness. Secure the BD module to the OEM harness using the provided tie wraps. Route the MAP sensor wire over the transmission and to the back of the intake horn. Connect it in line with the factory MAP sensor. Secure the wiring harness with supplied tie wraps and keep away from moving parts like the steering shaft or front drive shaft. Ensure connections are fully mated and have clicked together.
Sensor Connection
BD Engine Brake Inc.
1-800-887-5030 |
https://www.bddiesel.com
References
- BD Diesel USA - Diesel Performance Parts & Products
- BD Diesel USA - Diesel Performance Parts & Products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>