Saramonic SR-MV2000W Wired Wireless Dual Function Microphone User Manual

June 15, 2024
Saramonic

Wired/Wireless Dual-Function Microphone
SR-MV2000W
User Manual

Product Structure

Saramonic SR-MV2000W Wired Wireless Dual Function
Microphone

  1. Headphone volume control
  2. Gain/mute control
  3. Type-C port
  4. 3.5mm headphone jack
  5. Locking knob
  6. Smart LED indicator
  7. Battery level indicator
  8. Power/pair button
  9. Mic stand

RX

Saramonic SR-MV2000W Wired Wireless Dual Function Microphone -
RX

  1. 3.5mm headphone jack
  2. Type-C connector
  3. Volume control (+/-) / Pair button
  4. Mono/stereo switch
  5. Power indicator

Accessories

| Type-C female to
USB-A male adapter| | 3/8’’ to 5/8’’
screw adapter
---|---|---|---
| USB-A to
Type-C cable| | Type-C to
Type-C cable

Functions

  1. Magnetic BaseSaramonic SR-MV2000W Wired Wireless Dual Function Microphone - Magnetic Base
  2. Angle AdjustmentSaramonic SR-MV2000W Wired Wireless Dual Function Microphone - Angle Adjustment

Battery Charging

Indicator Status
Charging (breathing white light)
Full charged
Current battery level (75% power)
Low battery (25% power)

Operation Guide

A – Wired Operation

  1. Connect the microphone to your smartphone/computer
    Devices| Smartphone| Computer
    ---|---|---
    Connection| Type-C to Type-C cable;
    Type-C to Lightning cable (not included)| USB-A to
    Type-C cable
    System
    Requirements| Andriod/iOS devices| Windows 7/10
    Mac OS 10.12 or later

Note:
1. SR-MV2000W is also compatible with iOS devices.
The Type-C to Lightning adapter cable is not included. Please purchase it separately if needed.
2. For optimum sound, please press and hold the volume control and gain control knobs simultaneously to restore factory setting. The indicator will turn red and blinks three times.Saramonic SR-MV2000W Wired Wireless Dual
Function Microphone - Wired Operation

  1. Adjust the knobs according to your needsSaramonic SR-MV2000W Wired Wireless Dual Function Microphone - knobs
    | Direct/Playback Monitoring| Gain/Mute Control
    ---|---|---
    Control Button| |
    Smart LED
    Indicator Color| | | |
    Operating| Press the button to switch between direct and playback monitoring;
    Turn the knob to adjust the headphone volume.| Press the button to mute/unmute the microphone;
    Turn the knob to adjust gains for microphone input level.

B – Wireless Operation

  1. Turn on the transmitter
    Note: When using the wired function, short press the power button to enable the wireless function simultaneously.Saramonic SR-MV2000W Wired
Wireless Dual Function Microphone - knobs 1

  2. Connect the receiver to an external device
    1. Connect to a Type-C device 2. Connect to a USB-A deviceSaramonic SR-
MV2000W Wired Wireless Dual Function Microphone - knobs
3

  3. TX & RX Pairing TX
    Status| Indicator light colour
    ---|---
    Unpaired| green light flashes in cycle
    Pairing| green light flashes rapidly
    Paired Successfully| solid green light

Saramonic SR-MV2000W Wired Wireless Dual Function Microphone - knobs
4Saramonic SR-MV2000W Wired
Wireless Dual Function Microphone - knobs 5

Status Indicator light colour
Unpaired blue light flashes slowly
Pairing blue light flashes rapidly
Paired Successfully solid blue light

Note: If you ever need to use two USB mic in one device, you can simply add a second SR-MV2000W wireless transmitter (sold separately) and make it a 2-person wireless microphone. To add a second SR-MV2000W transmitter, please repeat the above pairing operation.

Specifications

Wired Operation

Mic Capsule 14mm Electret Condenser Capsule
Polar Pattern Cardioid
Frequency Response 20Hz-20kHz
Sensitivity -36dB (0dB=1V/Pa, 1kHz 1Pa)
Signal-to-Noise Ratio 80dB
Maximum SPL 120dB
Sampling Rate 48kHz
Bit Rate 16bit/24bit
Mic Gain 0~54dB
Working Voltage 5V 110mA
Audio Output Connector 3.5mm Headphone Jack, Type-C Port
Operating Temperature 0°C to 50°C
Storage Temperature –20°C to +55°C

Wireless Operation
Mic Capsule| 14mm Electret Condenser Capsule
Polar Pattern| Cardioid
Frequency Response| 35Hz-18kHz
Sensitivity| -36dB (0dB=1V/Pa, 1kHz 1Pa)
Signal-to-Noise Ratio| 80dB
Maximum SPL| 120dB
Transmission Type| 2.4GHz
Modulation| GFSK
Antenna| Dipole Antenna
Operating Range| 60m (Outdoors without obstacles)
RF Output Power| <10mW
Distortion| <0.05%
Battery Life| 6 hours
Charging Time| 1.5 hours
Battery Capacity| 850mAh
Dimensions| TX: 165×78.6×90mm
RX: 71.6×27.1×10.55mm
Weight| TX: 359g
RX: 12.5g

Packing List

  • SR-MV2000W Microphone×1
  • Wireless Receiver×1
  • Type-C Female to USB-A Male Adapter×1
  • 3/8’’ to 5/8’’ Screw Adapter×1
  • 6.6’(2m) USB-A to Type-C Cable×1
  • 6.6’(2m) Type-C to Type-C Cable×1

Polar Pattern

Frequency Response

Saramonic SR-MV2000W Wired Wireless Dual Function Microphone - Frequency
Response

1F0300400197Saramonic SR-MV2000W Wired Wireless Dual Function Microphone -
QR Code 1http://www.jiayz.com/AppDownloadQR/SmartRecorderQRPhone.html
For better recording experience, the application
SmartRecorder is recommended.http://weixin.qq.com/r/ikk1LQXEelgFrUFO9xyY
Scan the QR code and follow us!

Jiayz Photo Industrial., Ltd
A16 Building, Intelligent Terminal Industrial Park of Silicon Valley
Power, Guanlan, Longhua District, Shenzhen, China
****400-613-1096
www.saramonic.com
info@saramonic.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Saramonic User Manuals

Related Manuals