CHORD CG-10BT Guitar Amplifier with Bluetooth User Manual
- June 15, 2024
- chord
Table of Contents
CHORD CG-10BT Guitar Amplifier with Bluetooth
Product Information
Specifications
- Power supply : 230Vac, 50Hz (IEC)
- Output : 10Wrms
- Speaker : 165mm (6.5″)
- Controls : Gain, Drive, Volume, Treble, Middle, Bass, BT
- Connections : Guitar input, headphones out
- Dimensions : 295 x 290 x 153mm
- Weight : 4.132kg
Product Usage Instructions
Caution
Please read this manual carefully before operating. Damage caused by misuse
is not covered by the warranty.
Control Panel
- 6.3mm guitar input jack
- GAIN control
- DRIVE button
- VOLUME control
- TREBLE EQ control
- MIDDLE EQ control
- BASS EQ control
- Bluetooth on/off/pairing button
- Headphones output
- POWER on/off switch
Operation
- Connect your guitar to the input (1) using a 6.3mm jack lead.
- If you want to use headphones for silent practice, connect them to the 3.5mm PHONES jack (9).
- Turn the GAIN (2) and VOLUME (4) controls fully down, and all other controls to the vertical (12 o’clock) position.
- Connect the amplifier to the mains using the supplied mains lead via the rear panel IEC connector.
- Switch on the POWER (10).
- With the DRIVE button (3) in the ‘out’ position and GAIN up part way, gradually turn up the VOLUME until you hear sound. Increase both to the required level. More Gain increases both volume and drive.
- To achieve an overdriven sound, press the DRIVE button in and increase the GAIN. Balance the GAIN and VOLUME to suit your preference.
- Adjust the TREBLE (5), MIDDLE (6), and BASS (7) controls to achieve the required tone character.
Bluetooth Playback
The CG-10BT has a built-in Bluetooth receiver for wireless playback of backing tracks from a smart phone.
- Press the BT button (8) to activate Bluetooth pairing mode. The indicator will flash.
- In your phone’s menu, search for “CG-10BT” and select it to pair.
- Once pairing is completed, the indicator will stay on constantly, and any tracks played on the smart phone should be heard through the CG-10BT speaker.
- Once paired, the CG-10BT will automatically connect to the paired smart phone whenever Bluetooth is switched on.
FAQ
-
Q: Can I cover the cooling vents at the rear of the amplifier?
No, you should not cover the cooling vents at the rear of the amplifier. It is important to keep them clear for proper ventilation. -
Q: Can I use the amplifier in damp or dusty environments?
No, it is recommended to keep the amplifier away from damp or dusty environments to prevent damage. -
Q: Are there any user serviceable parts inside the amplifier?
No, there are no user serviceable parts inside the amplifier. Please refer all servicing to qualified personnel. -
Q: How should I dispose of the product?
The product should not be disposed of with other household or commercial waste at the end of its useful life. Please dispose of it according to your local council guidelines. -
Q: Where can I find the EU declaration of conformity?
The EU declaration of conformity is available at the following internet address: http://www.avsl.com/assets/exportdoc/1/7/173014UK%20CE.pdf
CG-10BT
Guitar Amplifier with Bluetooth®
Item ref : 173.014UK User Manual
Caution : Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing a Chord CG-10BT classically styled 10W guitar
amplifier.
Ideal for practice and rehearsal, this combo includes a Bluetooth receiver for
playing along to tracks from a smart phone. Please read this manual to gain
the best results from your product and avoid damage through misuse.
Caution
Do not cover cooling vents at the rear of the amplifier. Keep away from damp
or dusty environments. Check mains lead is in good condition and ensure mains
outlet voltage is correct as indicated.
Use only approved fuse rated as shown. Unplug from mains before replacing
fuse.
No user serviceable parts inside. Refer all servicing to qualified personnel.
Control panel
- 6.3mm guitar input jack
- GAIN control
- DRIVE button
- VOLUME control
- TREBLE EQ control
- MIDDLE EQ control
- BASS EQ control
- Bluetooth on/off/pairing button
- Headphones output
- POWER on/off switch
Operation
- Connect guitar to the input (1) via a 6.3mm jack lead.
- If headphones are to be used for silent practice, connect these to the 3.5mm PHONES jack (9)
- Turn the GAIN & VOLUME controls (2, 4) fully down and all other controls to the vertical (12 o’clock) position. Connect to mains using the supplied mains lead via the rear panel IEC connector and switch POWER on (10)
- With the DRIVE button (3) in the ‘out’ position and GAIN up part way, gradually turn up the VOLUME.
- Play until sound is heard and increase both to the required level. More Gain increases both volume and drive.
- Press the DRIVE button in and increase the GAIN for an overdriven sound and balance the GAIN and VOLUME to suit. Adjust TREBLE, MIDDLE and BASS (5, 6, 7) controls to achieve the required tone character.
- For wireless playback of backing tracks from a smart phone, the CG-10BT has a built-in Bluetooth receiver.
- Press the BT button (8) in and the indicator will flash. In your phone menu, search for “CG-10BT” and select to pair. Once pairing is completed, the indicator will stay on constantly and any tracks played on the smart phone should be heard through the CG-10BT speaker. Once paired, the CG-10BT will connect to the paired smart phone automatically whenever Bluetooth is switched on.
Specifications
| Power supply | 230Vac, 50Hz (IEC) |
|---|---|
| Output | 10Wrms |
| Speaker | 165mm (6.5“) |
| Controls | Gain, Drive, Volume, Treble, Middle, Bass, BT |
| Connections | Guitar input, headphones out |
| Dimensions | 295 x 290 x 153mm |
| Weight | 4.132kg |
Disposal : The “Crossed Wheelie Bin” symbol on the product means that the
product is classed as Electrical or Electronic equipment and should not be
disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your
local council guidelines.
Hereby, AVSL Group Ltd. declares that the radio equipment type 173.014UK is in
compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.avsl.com/assets/exportdoc/1/7/173014UK%20CE.pdf
- Errors and omissions excepted. Copyright© 2023.
- AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
- AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland