SHARP PN-LA652 LCD Monitor Instruction Manual

Table of Contents

Product Specifications

Scope
This document provides instructions for dismantling the product according to Annex VII of Directive 2012/19/EU.

Tools for Dismantling

Dismantle Procedure

Step 1: Remove Back Covers (Section 5)
Use a screwdriver to remove the back covers of the monitor.
Step 2: Remove Printed Circuit Boards (Section 6)
Use a screwdriver to remove the printed circuit boards from the monitor.
Step 3: Dismantle LCD (Section 7)
Follow the instructions in Section 7 to dismantle the LCD panel.
Step 4: Remove Electrolyte Capacitors (Section 8)
Use a nipper to cut the leads and remove electrolyte capacitors as described in Section 8.
Batteries
This model uses AAA batteries for the remote control. The battery can easily be removed.
Back Covers
The back cover can be removed using a screwdriver.
PWB and Other Electronic Components
All electronic components can be removed using a screwdriver. The following components can be dismantled:
- Main PWB
- Power PWB
- T-CON PWB
- LED Driver board
- KEY PWB
- PIR PWB
- TOUCH CONTROL PWB
- Speaker
LCD Module Bezels/Angles
The LCD module bezels/angles can be removed following the instructions provided for each model (PN-LA652, PN-LA752, PN-LA862).
Capacitors
Capacitors with a diameter larger than 25mm are installed on the Power PWB. Use a nipper to cut the leads and remove these capacitors.

Parts List
The spare parts listed below are available for professional repairers in accordance with EU Regulation 2019/2021:

Spare Part	Part Name/Element of Part
a.	Internal power board
b.	Connectors to connect external equipment
c.	Batteries and Accumulators
d.	DVD/Blue-Ray module
e.	HD/SSD module

Frequently Asked Questions (FAQ)

Q: What tools are required for dismantling the monitor?
A: You will need a screwdriver and a nipper.
Q: Can the back covers be easily removed?
A: Yes, the back covers can be removed using a screwdriver.
Q: How can I remove the electrolyte capacitors?
A: Use a nipper to cut the leads and remove the capacitors as instructed in Section 8.

LCD MONITOR

Scope
This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU.
Tools for dismantling
- Screw Driver
- Nipper
Dismantle Procedure
This product can be dismantled by below steps.
Remove Back covers (section 5)
Remove Printed circuit boards (section 6)
Dismantle LCD (section 7)
Remove Electrolyte Capacitors (section 8)
Batteries
This model uses only AAA battery for remote control. Battery can easily be removed.
Back covers
back cover can be removed by screw driver.
PWB and other electronic components
All electronic components can be removed by screw driver.
KEY PWB
PIR PWB
TOUCH CONTROL PWB
Speaker
LCD Module bezels/angles
PN-LA752
PN-LA862
Capacitors
Capacitors which diameter is larger than 25mm is installed on the Power PWB. And these capacitors can be removed by using nipper to cut the leads.
Parts List
The spare parts listed in the column “Spare Parts” below are kept available in accordance to legal requirements of EU Regulation 2019/2021 for professional repairer.

Spare Part	Part Name/ Element of Part
a. Internal power board	Power PWB
b. Connectors to connect external equipment	Main PWB
c. Batteries and Accumulators	Battery (AAA) of remote control
d. DVD/Blue-Ray module	not applicable
e. HD/SSD module	not applicable