Marslite GRB12 Wall Washer Light Bar User Manual
- June 15, 2024
- Marslite
Table of Contents
Marslite GRB12 Wall Washer Light Bar User Manual
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR
INITIAL START-UP!
CAUTION: Keep this equipment away from rain, moisture and liquids.
SAFETY INSTRUCTIONS
Every person involved with the installation, operation & maintenance of this equipment should:
- Be competent
- Follow the instructions of this manual
CAUTION: Take care using this equipment! high voltage risk of electric shock!
Before your initial start-up, please make sure that there is no damage caused during transportation. Should there be any, consult your dealer and do not use the equipment.
To maintain the equipment in good working condition and to ensure safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual.
Please note that damages caused by user modifications to this equipment are not subject to warranty.
Digital display operate:
a). Illustration part:
A. MENU
B. UP
C. DOWN
D. ENTER
Operation Instructions:
After starting press A(MENU) Enter into main-menu, Press B(UP) C(DOWN) to select the submenu, and then press D(ENTER) to ensure.
ATTENTION:
DANGER OF LIFE! RISK OF BURNS! RISK OF FIRE!
RISK OF SHORT CIRCUIT!
DMX Signal Connection
3—Pin XLR to 5-Pin XLR Conversion
Conductor| 3-Pin XLR Female (OUT)| 5-Pin XLR Male(IN)
Ground/Shield| Pin 1| Pin 1
Data Compliment(-signals| Pin 2| Pin 2
Data True (+signaIJ| Pin 3| Pin 3
Not Used| | Pin 4-Do Not Used
Not Used| | Pin 5—Do Not Used
Technical Specifications:
- Voltage: AC110-240V,50/60HZ
- Power: 80W
- LED Wash: 12x3W 3IN1 RGB LED
- LED Beam: 12x3W Warm White LED
- DMX Channels: 4/6/11/48/54
SETTING MENU LED DISPLAY:
| Mode | Programming | Description |
|---|---|---|
| Auto mode | Auto | Sp 1-10 |
| St 0-9 | Strobe Speed 0-9 (slow->fast) | |
| DMXmode | Addr | 4 CH |
plugged into the consoIe,automaticaIIy enter DMX mode
6 CH| A001-A507
11CH| A001-A502
48CH| A001-A465
54CH| A001-A459
Show| Shou| Sh 1-3| Program Show 1-3| Effect 1: Wash light effects
Effect 2: Beam light effects
Effect 3: Wash & Beam light effect
Sp 1-10| Program Speed 1-10 (slow->fast)
| | St 0-9| Program Flash 0-9 (slow->fast)
Sound Mode| Soud| Sou1-3| Sen1-9| Sound active modes 1-3, soundsensitivity 1-9
Slave| SLAV| Slave| Slave (Slave,automatically identify the master)
Edit cOIoF| COIO| r000-255| Red (0-100%) Red Dimming
g000-255| Green (0-100%) Green Dimming
b000-255| Blue (0-100%) Blue Dimming
U000-255| White (0-100%) Warm White Dimming
St0-9| LED Strobe (slow->fast)
Static colors| StAt| CL01-CL37| Static color (37 Static colors to choose from)
St0-9| Strobe (slow->fast)
Product Set| Set| dis| 10s| Set display board backlight time, 10 seconds to
always on, factory default 10 seconds
20s
30s
60s
on
tenP| 50-65”C| Protection temperature setting, 50-65“C range protection, more
than this range began to reduce the output power
dir| —>| Chasing direction: right
<—| Chasing direction: left
InFr| | Remote control function setting
Send| yes| One button to set the send function to send the current light
channel mode and temperature protection value to other lights connected to
this light. (No other controller on the line)
Information| Info| ver| VVxx| Soft version
tenp| XX C| The current light board temperature (degrees Celsius), if the
temperature detection line failure, power onprompt -RT-, menu display eror
DMX MODE 1:4 CH
| CH1 | 0-255 | ALL RED (0-100%) |
|---|---|---|
| CH2 | 0-255 | ALL GREEN (0-100%) |
| CH3 | 0-255 | ALL BLUE (0-100%) |
| CH4 | 0-255 | ALL Warm White (0-100%) |
DMX MODE 2: 6 CH
| CH1 | 0-255 | Master Dimmer |
|---|---|---|
| CH2 | 0-9 | No Function |
| 10-255 | Slow->Fast | |
| CH3 | 0-255 | ALL RED (0-100%) |
| CH4 | 0-255 | ALL GREEN (0-100%) |
| CH5 | 0-255 | ALL BLU E (0-100%) |
| C H6 | 0-255 | ALL Warm White (0-100%) |
DMX MODE 3: 11CH
| CH1 | 0-255 | Master Dimmer |
|---|---|---|
| CH2 | 0-255 | ALL RED (0-100%) |
| CH3 | 0-255 | ALL GREEN (0-100%) |
| CH4 | 0-255 | ALL BLUE (0-100%) |
| CH5 | 0-255 | ALL Warm White (0-100%) |
| CH 6 | 0-9 | No Function |
| 10-255 | Slow->Fast | |
| CH7 | 0-3 | No Function |
| 4-7 | Pattern Effect 1 (CH2-4 Control the pattern color) | |
| 8-11 | Pattern Effect 2 (CH2-4 Control the pattern color) | |
| ,,, | ,,,,, | |
| 148-151 | Pattern Effect 37 (CH2-4 Control the pattern color) | |
| 152-155 | Pattern Effect 38 (Built-in effect colors) | |
| 156-159 | Pattern Effect 39 (Built-in effect colors) | |
| ,,, | ,,,,,, |
DMX MODE 4:48CH
| CH1 | 0-255 | R1 (0-100%) |
|---|---|---|
| CH2 | 0-255 | G1 (0-100%) |
| CH3 | 0-255 | B1 (0-100%) |
| CH4 | 0-255 | R2 (0-100%) |
| CH5 | 0-255 | G3 (0-100%) |
| CH6 | 0-255 | B4 (0-100%) |
| ,,,,,, | ,,,,,, | ,,,,,, |
| CH34 | 0-255 | R12 (0-100%) |
| CH35 | 0-255 | G12 (0-100%) |
| CH36 | 0-255 | B12 (0-100%) |
| CH37 | 0-255 | W1 (0-100%) |
| CH48 | 0-255 | W12 (0-100%) |
DMX MODE 5: 54CH
| CH1 | 0-255 | R1 (0-100%) |
|---|---|---|
| CH2 | 0-255 | G1 (0-100%) |
| CH3 | 0-255 | B1 (0-100%) |
| CH4 | 0-255 | R2 (0-100%) |
| CH5 | 0-255 | G3(0-100%) |
| CH6 | 0-255 | B4 (0-100%) |
| CH34 | 0-255 | R12(0-100%) |
| CH35 | 0-255 | G12 (0-100%) |
| CH36 | 0-255 | B12 (0-100%) |
| CH37 | 0-255 | W1 (0-100%) |
| CH48 | 0-255 | W12 (0-100%) |
| CH49 | 0-9 | No Function |
| 10-255 | Slow->Fast | |
| CH 50 | 0-3 | No Function |
| 4-7 | Pattern Effect 1 (CH1-3 Control the pattern color) | |
| 8-11 | Pattern Effect 2 (CH1-3 Control the pattern color) | |
| 148-151 | Pattern Effect 37 (CH1-3 Control the pattern color) | |
| 152-155 | Pattern Effect 38 (Built-in effect colors) | |
| 156-159 | Pattern Effect 39 (Built-in effect colors) | |
RGB 3in1 Background Color Table:
| Value | Color |
|---|---|
| 0-6 | R:000 G:000 B:000 |
| 7-13 | R: 51 G:000B:000 |
| 14-20 | R:102 G:000 B:000 |
| 21-27 | R:153 G:000 B:000 |
| 28-34 | R:204G: 000 B:000 |
| 35-43 | R:255G: 000 B:000 |
| 42-48 | R:OOOG: 51 B:000 |
| 49-55 | R:000 G:102 B:000 |
| 56-62 | R:000 G:153 B:000 |
| 63-69 | R:000 G:204 B:000 |
| 70-76 | R:000 G:255 B:000 |
| 77-83 | R: 000 G:000 B: 51 |
| 84-90 | R:000G:000 B:102 |
| 91-97 | R:000 G:000 B:153 |
| 98-104 | R:000 G:000 B:204 |
| 105-111 | R:000 G:000 B:255 |
| 112-118 | R: 51 G: 51 B:000 |
| 119-125 | R:102 G:102 B:000 |
| 126-132 | R:153 G:153 B:000 |
| 133-139 | R:204 G:204 B:000 |
| 140-146 | R:255 G:255 B:000 |
| 147-153 | R: 51 G:000 B: 51 |
| 154-160 | R:102 G:000 B:102 |
| 161-167 | R:153 G:000 B:153 |
| 168-174 | R:204 G:000 B:204 |
| 175-181 | R:255 G:000B:255 |
| 182-188 | R:000 G: 51 B: 51 |
| 189-195 | R:000 G:102 B:102 |
| 196-202 | R:000 G:153 B:153 |
| 203-209 | R:000 G:204 B:204 |
| 210-216 | R:000 G:255 B:255 |
| 217-223 | R: 51 G: 51 B: 51 |
| 224-230 | R:102 G:102 B:102 |
| 231-237 | R:153 G:153 B:153 |
| 238-244 | R:204 G:204 B:204 |
| 245-255 | R:255 G:255 B:255 |
MAINTENANCE
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
- Unplug the product from power.
- Wait until the product is at room temperature.
- Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
- Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
- Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
- Softly drag any dirt or grime to the outside of the transparent surface.
- Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
CAUTION: Take care using this equipment! high voltage risk of electric shock!!
Customer Service
You will get 12-months warrantty, and if you have any questions, please don’t hesitate to contact us in advance. Our customer service will try our best to help you more. Thank you!
Email: info@lalucenatzonline.com
Phone: +86-180-9898-6330
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>