THEGALLERY IWA 3S ThinTop with DryDock 12 WashStation Installation Guide
- June 13, 2024
- THEGALLERY
Table of Contents
THEGALLERY IWA 3S ThinTop with DryDock 12 WashStation Installation Guide
Specifications
Single bowl
- Users: 1
- Wash Tools included: Four
- DryDock Tool included: One
- Galley Tap recommended: One
- Outside dimensions: 1156 x 495 x 73 mm
- Interior dimensions: 1118 x 457 x 70 mm
- Countertop cutout: 1118 x 457 mm
- Minimum cabinet size: 1219 mm
- Minimum clearance required for DryDock
- below countertop: 76 mm
- DryDock location: Drain side (S)
Basin (KSO-3-S-DS-12-S-TT-SS)
16GA 316L stainless steel indoor/outdoor
SilentArmor™ sound reduction technology
Angel finish
Three tier design
Star™ groove pattern
Reversible side drain
Drain cover included
Limited Lifetime Warranty
Made in the USA
ASME A112.19.3/CSA B45.4 certified
cUPC™ certified
Customize Your Galley
Add 178-305 mm length
Add 25-152 mm length
Add 457 mm DryDock
Add 305 mm DryDock
Apron front
229 mm depth
Center drain
WorkTop™
*Color coded labels available
DryDock Tool included (DR-12)
(1) Lower Tier
Drying Rack
311 x 432 mm
DR-12-L-xx
Upper Deck®
Recommended Basin Accessories & citrine®
SPECIFICATIONS
Right Hand Drain Orientation
Tap Hole Specifications
SUGGESTED GALLEY TAP PLACEMENT GUIDE
Suggested maximum inside corner radius of countertop cutout 9.5 mm
Galley Tap 35 mm min to 38 mm max hole diameter
Center Tap hole diameters 51 mm behind cutout
Note: Galley Hot & Cold Tap requires a minimum 203 mm clearance to center if
installed to the right of the Galley Tap
Note: Tap Placements are for right hand or left hand drain orientation
Call 800.375.4255 or email
customercare@thegalley.com
for additional guidance on Tap and Tap Accessory placements
Countertop Cutout Plan
Important Installation Note: DryDock requires 76 mm minimum clearance below countertop
STAINLESS STEEL COMPLIANCE ASME A112. 19.3-2008/CSA B45.4-08
WE RESERVE THE RIGHT TO MAKE REVISIONS WITHOUT NOTICE IN THE DESIGN OF
PRODUCTS OR IN
PACKAGING UNLESS THIS RIGHT HAS SPECIFICALLY BEEN WAIVED AT THE TIME THE ORDER
IS ACCEPTED.
DWG and DXF templates available on our website:
TheGalley.com/specification-library
Questions? For additional assistance, please contact
The Galley’s Customer Care Department at 800.375.4255
SPECIFICATIONS
| Left Hand Drain Orientation
Tap Hole Specifications
SUGGESTED GALLEY TAP PLACEMENT GUIDE
Suggested maximum inside corner radius of countertop cutout 9.5 mm
Galley Tap 35 mm min to 38 mm max hole diameter
Center Tap hole diameters 51 mm behind cutout
Note: Galley Hot & Cold Tap requires a minimum 203 mm clearance to center if
installed to the right of the Galley Tap
Note: Tap Placements are for right hand or left hand drain orientation
Call 800.375.4255 or email customercare@thegalley.com
for additional guidance on Tap and Tap Accessory placements
Countertop Cutout Plan
Tap Hole Specifications
Important Installation Note: DryDock requires 76 mm minimum clearance below
countertop
STAINLESS STEEL COMPLIANCE ASME A112. 19.3-2008/CSA B45.4-08
WE RESERVE THE RIGHT TO MAKE REVISIONS WITHOUT NOTICE IN THE DESIGN OF
PRODUCTS OR IN
PACKAGING UNLESS THIS RIGHT HAS SPECIFICALLY BEEN WAIVED AT THE TIME THE ORDER
IS ACCEPTED.
DWG and DXF templates available on our website:
TheGalley.com/specification-library
Questions? For additional assistance, please contact
The Galley’s Customer Care Department at 800.375.4255
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>