CANBAT 24V 25A Lithium Battery Charger Owner’s Manual

CANBAT 24V 25A Lithium Battery Charger

Please read this manual carefully before use! Subject to change without prior notice. Contact us if you have any other questions!

Technical Features

• Advanced high frequency switching mode power supply technology.
• DC output is isolated from AC input.
• North American single input 110 Vac, 50Hz~60Hz Frequency.
• Charging parameters are insensitive to the AC input line voltage variatuions.
• Completely automatic battery charging: CC,CV.
• Short-circuit, overvoltage, over-temperature, reverse polarity protections.
• High efficiency of over 96%.
• Forced ventilation utilizing fans.
• 100% full load bornites.

Charging Instructions

1. Confirm your power outlet is 120V then connect the charger.
2. If the charger has a power switch, it must be set to ON.
3. Verify that AC power is on by ensuring LED 1 is red and LED 2 is green.
4. Connect the charger leads to the battery terminals. Connect the red wire to the positive terminal first and then the black wire to the negative terminal.
5. 2 red LEDs indicates that the battery is charging .
6. Once the battery is full charged, LED 2 will turn green again .

Charging Mode (2-stage)

• Step 1: CC (Constant Current)
• Step 2 : CV (Constant Voltage)

Precautions

• Sparking may occur initially when connecting the charger to the battery due to high current.
• This charger is only designed for charging LiFeP04 type lithium batteries.
• Do not cover the charger; always operate the charger in a ventilated environment.
• Do not disassemble the charger; it’s dangerous and will void the warranty.

Storage

Store the charger in its original packaging. Storage temperature should be between -40 to 70°c with a relative humidity of 5 to 95%. Store away from harmful gas, inflammable gas, explosive products, corrosive chemical products, mechanical vibration, shock and strong magnetic fields. Store the package at least 20 cm above the ground and 50 cm away from wall. Store it away thermal sources and vents. The charger must be turned on at least once every three months for a minimum of 30 minutes.

CANADIAN BATTERY MANUFACTURER

Canbat Technologies lnc. provides customers with the highest quality and safest lithium iron phosphate battery products. All rights reserved. Canbat Technologies Inc. is not liable for damages that may result from any information provided in or omitted from this publication, under any circumstances. Failure to follow Canbat installation guidelines may invalidate the warranty. Canbat reserves the right to make adjustments to this publication at any time, without notice or obligation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>