V-TAC VT-1230 Stand Lamp Instruction Manual
- June 15, 2024
- V TAC
Table of Contents
INSTRUCTION MANUAL
STAND LAMP
WEEE Number: 80133970
TECHNICAL DATA
| MODEL | VT-1230 |
|---|---|
| SKU | 11826 |
| WATTS | 60W |
| INPUT POWER | AC:220-240V,50/60Hz |
| IP RATING | IP44 |
| HOLDER | E27 [Bulb not included] |
| UNIT COLOR | MATTE BLACK |
| MATERIAL | Aluminium + PLASTIC |
| DIMENSION | 200x200x330mm |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the
installation and keep this manual handy for future reference.
If you have any another query, please contact our dealer or local vendor from
whom you have purchased the product. They are trained and ready to serve you
at the best. The warranty is valid for 3 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal
wear and tear. The company gives no warranty against damage to any surface due
to incorrect removal and installation of the product. The products are
suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day
would void the warranty. This product is warranted for manufacturing defects
only.!
WARNING
- Ensure Electricity is switched off before installation
- Please read through all following instruction before installing the unit.
- User should prepare necessary accessories and spare parts (Not Provided)
- Installation must be performed by a qualified electrician
- Proper grounding should be ensured throughout the installation.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
**** This marking indicates that this product should not be disposed of with
other household wastes.
Caution, risk of electric shock.
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
- Turn off the power.
- Mark drilling area with 135mm gap.
- Drill the holes in the ground.
- Dig the plastic into the hole.
- Fix the screws in the holes.
- Connect supply leads with terminal brown (L) to brown, blue (N) to blue and greenish-yellow ( ) to greenish-yellow.
- Tighten the srews to fix the wires.
- Tighten the nuts to fix down the lamp.
- Open the lamp and install the bulb in the lamp.
- Fit the Lamp with clockwise rotation
- Check whole fitting is correct.
- Turn on the Power
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
[email protected]
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B