XP-pen MT1172B Drawing Tablet User Guide

: June 15, 2024
: XP-PEN

Table of Contents

XP-pen MT1172B Drawing Tablet
Overview
Connection
- Wired Connection
- Wireless connection
Wireless Shortcut Remote
Bluetooth Device Switching
Support System
Download and Install the Driver
Declaration of Conformity
FCC STATEMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

XP-pen MT1172B Drawing Tablet

XPPEN TECHNOLOGY CO.

Overview

Drawing Tablet

XP-pen-MT1172B-Drawing-Tablet-FIG-12

Power Key
- Long press for 3 seconds：Power on or off
- Long press for 6 seconds：Bluetooth pairing mode
Bluetooth Switching Button
USB -C port
Indicator 1
In blue status:
- Flashing slowly: No Bluetooth connected
- Flashing quickly: Waiting for Bluetooth pairing（Long press the Power Key for 6 seconds）
- Always On: Successfully paired
  In red status:
- Flashing: Low battery ( 20%)
- Always On: Charging
- OFF: Fully charged
  The purple status indicates that the red and blue indicators are both On
  simultaneously
Indicator 2
- OFF: The stylus is beyond the active area
- Always On: The stylus is in contact with the active area
Active Area

Accessories (Diagram)

XP-pen-MT1172B-Drawing-Tablet-FIG-1

All descriptions and pictures shown are for reference only and may dier from the actual products. Due to different product specifications, the wireless shortcut remote may not be included. Please refer to the actual product received. Due to different product specifications, the Bluetooth receiver may not be included. Please refer to the actual product received.

Wireless Shortcut Remote

Power Slide Switch
Indicator Light

In blue status:

Flashing slowly: No Bluetooth connected
Flashing quickly: Waiting for Bluetooth pairing
Always on: Successfully paired (Always on for 30 seconds and then off)

In red status:

Flashing: Low battery ( 20%)
Always on: Charging
Off: Fully charged

The purple status indicates that the red and blue indicators are both On simultaneously

Roller
USB -C Port
Shortcut Key Group
The Wireless Shortcut Remote can be customized in four modes, with each mode customizing 10 keys. You can disable them if you don’t need them. One mode is enabled by default, and K1 is the toggle key. Click to switch between different key groups.

Connection

Wired Connection

Drawing Tablet
Please connect the USB-C to USB-C cable or the USB-C to USB-A cable to the USB port on the computer and the USB-C port on the tablet side respectively . XP-pen-MT1172B-Drawing-Tablet-FIG-3

Wireless Shortcut Remote
Please connect the USB-C to USB-C cable or the USB-C to USB-A cable to the USB port on the computer and the USB-C port on the wireless shortcut remote respectively.

Connect to Android Phone or Tablet

Please connect the USB-C to USB-C cable to the Android device and the drawing tablet respectively.
Please place the XPPen drawing tablet and the Android device upright, and open an Android App with support for pressure sensing.
Please disenable the auto-rotate function in the Android device, and keep the screen in portrait mode.
- Currently, the drawing tablet can only be used normally when the Android device is in portrait mode. It will not be used normally when in landscape mode.

Wireless connection

Direct Bluetooth Connection Drawing Tablet

Press and hold the power switch for 3 seconds to turn on the drawing tablet, and the indicator light 1 ﬂashes in blue; then long press the power switch for 6 seconds to enter the waiting state for pairing, and the indicator light 1 ﬂashes in blue quickly.
Turn on the Bluetooth on the computer, add Bluetooth device, search for the device name “Deco Pro XX”, and click to complete the Bluetooth pairing, with the blue indicator light 1 always on.
Press and hold the power switch for 3 seconds to shut down.

Wireless Shortcut Remote

Slide the power switch and the blue indicator light ﬂashes slowly. Then long press the K1 shortcut key for 3 seconds to enter Bluetooth pairing and the blue indicator light ﬂashes quickly.
Turn on the Bluetooth on the computer, add Bluetooth device, search for device name “Shortcut Remote” and complete Bluetooth pairing by clicking the device name “Shortcut Remote”, with the blue indicator always on. The indicator will be off after 30 seconds.
Slide the power switch again to turn off.

Bluetooth Receiver Connection Only Wireless Shortcut Remote
Plug the Bluetooth receiver into the computer and slide the power switch, with the indicator light always on in blue. The blue indicator will be off after 30 seconds. XP-pen-MT1172B-Drawing-Tablet-FIG-8

Bluetooth Device Switching

The drawing tablet supports connection to two Bluetooth devices

Toggle the Bluetooth switch button to button 1, long press the power button for 6 seconds, and the drawing tablet is paired with device 1.
Toggle the Bluetooth switch button to button 2, press and hold the power key for 6 seconds, and the drawing tablet is paired with device 2.
Toggle the Bluetooth switch button to switch the Bluetooth connection between the two devices.

Support System

Drawing Tablet Wired Connection
Windows 7 (or later), macOS X 10.10 (or later), Android 10.0 (or later), Chrome OS 88 (or later), Harmony OS, Linux.

Bluetooth Connection:
Windows 10 (or later), macOS X 10.10 (or later).

Wireless Shortcut Remote Wired or Dongle Connection
Windows 7 (or later), macOS X 10.10 (or later), Linux.

Bluetooth Connection:
Windows 10 (or later), macOS X 10.10 (or later).

Download and Install the Driver

Make sure your equipment is connected correctly to the computer.
Visit the XPPen website (www.xp-pen.com), click on the Support section and then Download. Choose a product model and download the latest driver according to your computer system.
Follow the prompts to finish the driver installation.

Notes

Before installation, please close all anti-virus software and graphics software.
If the computer has already installed the drivers of other brands, please uninstall them first.
Please restart your computer after the installation is complete.
For the best performance of your device, it is recommended that you use the latest version of the driver.

If you need any further assistance, please contact us at:

Declaration of Conformity

Hereby,[Hanvon Ugee Technology Co.,Ltd.] declares that the radio equipment type [MT1592B] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.ugee.com/

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC STATEMENT

FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

eorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference；
this device must accept any interference, including interference that may cause undesired operation of the device.

```
*  **Operation Frequency:** 2402-2480MHz
```
- Max power：3.9dbm
- Operatingtemperature： 0~45℃
- Manufacturer：Hanvon Ugee Technology Co.,Ltd.
- Address：2/F, West of 3/F, 4/F, No.4 Building, Fulongte Industrial Park, Huaxing Road, Langkou Community,Dalang Street, Longhua District, Shenzhen, Guangdong China