dahua AX1500 Wi-Fi6 Wireless Router Instruction Manual

dahua AX1500 Wi-Fi6 Wireless Router

Product Information

Specifications

• Model: AX1500
• Wireless Standard: Wi-Fi6
• Manufacturer: ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

About the Manual

This manual provides instructions for the setup and usage of the AX1500 Wi-Fi6 wireless router.

FAQ

Q: How do I change the Wi-Fi password?

A: To change the Wi-Fi password, follow these steps:

1. Access the device management webpage by entering “192.168.1.110” in your browser.
2. Enter the administrator password and click Log in.
3. Navigate to the Wi-Fi settings page.
4. Locate the Wi-Fi password field and enter your desired password.
5. Click Save or Apply to save the changes.

Foreword

General

This manual introduces the installation, functions and operations of the wireless router AX1500 Wifi6 (the “Device”).
Read carefully before a use the device and keep the manual safe for future reference.

Safety instructions

The following signal words may appear in the manual.

Signal words / Meaning

• Danger: Indicates a high potential hazard which, if not avoided, will lead to death or serious injury.
• WARNING: Indicates a medium or low potential hazard which, if not avoided, could result in minor or moderate injury.
• CAUTION: Indicates a potential hazard which, if not avoided, could lead to material damage, data loss, performance reduction or unpredictable results.
• TIPS: Provides methods to help you solve a problem or save time.
• NOTE: Provides additional information as a supplement to the text.

About the Manual

• The manual is for reference only. Small differences may be found Between manual and product.
• We are not responsible for losses incurred due to the use of the product in ways that are not in accordance with the manual.
• The manual will be updated in accordance with the latest laws and regulations related jurisdictions. For detailed information, see the user manual on paper, use our CD-ROM, scan the QR code or visit our official website.
• The manual is for reference only. You might find small differences between the version electronic and paper version.
• All models and software are subject to change without prior notice signed up. Product updates may lead to differences between the real and manual product. Please contact customer service for the latest program and additional documentation.
• There may be printing errors or deviations in the description of functions, operations and technical data. If there is any doubt or dispute, we reserve the right to final explanations.
• Update your reading software or try another general reading software if the manual (in PDF format) cannot be opened.
• All trademarks, registered trademarks and names companies in the manual are properties of their respective owners.
• Please visit our website, contact the supplier or customer service if problems occur while using the device.
• If there is any uncertainty or controversy, we reserve the right to explanations finals.

Important Precautions

Important precautions and warnings

• This section presents content covering the proper handling of the device, prevention of dangers and prevention of material damage. Read carefully before a use the device and follow the instructions when using it.

Installation requirements

WARNING

• Do not connect the power adapter to the device while the adapter is turned on.
• Strictly follow the local electrical safety code and standards. Make sure that the ambient voltage is stable and meets the power requirements of the device.
• Personnel working at height must take all necessary measures to ensure personal safety, including wearing a helmet and seat belts.
• Do not leave the outdoor models of the device hanging in the air or facing up outside when installed on poles that are on top of buildings.

Warning

• Do not place the device in a place exposed to sunlight or near sources of the heat.
• Place the device in a well-ventilated place and do not block its ventilation.
• Use an adapter or cabinet power supply provided by the manufacturer.
• Do not connect the device to two or more types of power sources, to avoid damage to the device.
• The device is a class I electrical device. Make sure that the source of the device’s power supply is connected to a grounded outlet protection.
• The device must be grounded by a single-section copper wire cross section of 2.5 mm2 and a mass resistance of at most 4 0.
• The voltage stabilizer and overvoltage protection are optional, depending on the real power source on the spot and the surrounding environment.
• To ensure heat dissipation, the distance between the device and the surrounding area it must not be less than 10 cm on the sides and 10 cm on top the device.
• When installing the device, make sure that the power plug and coupling of the device are easy to touch to interrupt the power supply.
• Outdoor models of the device must be installed safely on poles or brackets that are perpendicular to the ground. Make sure the whole surface of the device and all its related components are covered with an anti-oxidation layer (such as anti-rust paint) and that the place of installation and
• The height of the device meets the requirements of the plan.
• Install outdoor device models on top of buildings where there is little or no direct sunlight to avoid overheating the device. Make make sure you take all the necessary measures to protect the device.
• Point the side with the Ethernet port down and arrange the wires in the direction down when installing outdoor models of the device.

Functional requirements

WARNING

• Do not disassemble the device without professional instructions.
• Operate the device within the rated input and output power range.
• Make sure the power source is correct before use.
• Make sure the device is turned off before disassembling the wires to avoid personal injury.
• Do not disconnect the power cord from the side of the device while the adapter is turned on.

Operating guide

Preparations

Step 1: Check if the package is missing or damaged and contact after- sales personal if any.
The packing list may differ depending on the actual products.

Table 1-1: Packing list

No/ Name / Amount

1. Router/ 1
2. Power adapter/ 1
3. User’s manual/ 1
4. Network cable/ 1

Step 2: Connect the broadband access line to the WAN port of the device and connect the DC power plug to the DC interface of the device. After power on, the indicator is red continuously for 10 seconds and then flashes green, blue and red alternately. The system flashes green after it starts normally.

Configuring the router

• Step 1: Search for wifi signal with phones or laptops, then connect Wifi. The name is “Dahua_WIFI_XXXXXX” or “Dahua_WIFIXXXXX_5G” (XXXXXX is the last six digits of the MAC address of the device), and the default wifi has no password.
• Step 2: Open your browser, type “192.168.1.110” and press Enter key to go to the device management web page. Enter the administrator password, then click Log in.
• Step 3: When you connect to the web page for the first time, the device will appear activate the setup wizard. You can change the language depending on page prompts, then click Next after you’re done with configuration.
• Step 4: Enter Configure your connection to the web page and change the connection type as needed. After setup, click Next. Internet Connection Type includes DHCP Connection (dynamic IP address), Username/Password connection (PPPoE), and Connection with static IP address.
  • If you do not need settings to access the Internet, select DHCP connection.
• Step 5: Enter Wi-Fi Settings web page, configure the wifi network name and password. When Smart Connect is disabled, the name of the 2.4 GHz network and 5 GHz must be different. After configuration, click Next.
• Step 6: Enter the device administrator password web page, configure administrator password as requested. When Sync your WiFi password is enabled, the device administrator password is automatically synchronized to match the Wi-Fi password. When Sync your WiFi password is disabled, you must configure the password. After configuration, click Next.
• Step 7: Enter web page summary, check Connection type, Wifi Network name, Wi-Fi password, then click finish.
• Step 8: Search for a new Wi-Fi name and enter the password. After connection, enter “192.168.1.110” to access the device management page.

Indicator description

Table 1-2: Indicator and button

Indicator and port / Description

• Indicator
  • During startup:
  • Power indicator: Flashing green.
  • 5G indicator: off and continuous green.
  • 2.4G Indicator: Off.
  • Internet Indicator: Disabled.
  • LAN Indicator: Disabled.
  • WPS Indicator: Disabled.
  • After starting:
  • Power indicator: Flashing green.
  • 5G indicator: solid green when 5G is activated and off when is disabled.
  • 2.4G indicator: solid green when 2.4G is on and off when disabled.
  • Internet indicator: solid green when the network is connected, flashes when data is being transmitted and off when it is disconnected.
  • LAN indicator: solid green when at least one device is LAN port of the router and off when no device is LAN router port.
  • WPS indicator: Stops flashing when WPS is activated and successfully connected to end devices. It doesn’t blink anymore in 120 seconds when WPS is not connected to end devices. Off when WPS is disabled.
• The reset button: Return to default settings. Press and hold for 10 seconds to restore and restart automatically.
  • The WPS button: Press for 1 second to activate the WPS function.

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>