AVCOMM 4005GX-POE Unmanaged Ethernet Switch Installation Guide
- June 15, 2024
- AVCOMM
Table of Contents
AVCOMM 4005GX-POE Unmanaged Ethernet Switch Installation Guide
Overview
4005GX-POE is 4-port 10/100/1000Base-T RJ-45 and 1 1000 Base-X industrial grade unmanaged Ethernet switch with reverse polarity protection of DC input and provides 4╳PoE powers that up to 30W each. It has ingenious appearance design and supports DIN Rail mounted/wall-mounted to facilitate in various industrial network applications.
Package Checklist
- 1 x Product Unit
- 2 x Mounting plate
- 6 x Screw
- 1 x Quick Installation Guide
Installation
DIN Rail-mounted
To mount the switch on the DIN Rail track, insert the upper end of the
DIN‐Rail clip into the back of the DIN‐Rail track from its upper side and
lightly push the bottom of the DIN‐Rail clip into the track. The DIN Rail
should comply with DIN EN50022 standard. Using wrong DIN rail may cause unsafe
installation.
Grounding Screw
For avoiding system damage by noise or electric shock, establish a direct
connection between the grounding screw and the grounding surface prior to
connecting devices.
Wall-mounted
Tighten the metal fixation plate by , then hang the machine with locked metal
strip onto wall or machine cabinet.
Wiring the Power Input
- Insert the positive and negative wires into the V+ and V- contact on the terminal block connector.
- Tighten screws when the wire is connected.
- Connect the power wires to suitable DC Switching type power supply
Appearance
- Rail clip
- Mounting bracket
- Grounding screw
- Power indicator P1 P2
- Alarm indicator FAIL
- Fiber indicator FDX
- Fiber port
- POE indicator
- 10/100/1000Base-TX port
Indicator
LED | Status | Description |
---|---|---|
__P1 P2 | Green On | Power is in normal condition |
Green Off | Power is abnormal or power failure | |
__FDX | Green On | Link is ready |
Green Blinking | Link is established | |
Green Off | Link is not ready or link failure | |
__FAIL | Red On | With alarm output |
Red Off | Without alarm output | |
__RJ45 | Green On | 1000Base network is ready |
Green Off | 10/100Base network is ready | |
Amber On | Network is ready | |
Amber Blinking | Link is established | |
Green Off Amber Off | Link is not ready or link failure | |
__POE | Green On | POE Power is in normal condition |
Green Blinking/Off | POE Power is abnormal |
Safety Precautions
- Keep DC power off before connecting to the terminal block connectors and ensure all connections are secure established.
- Do make sure that models connect to the corresponding supply voltage. The device is to be supplied by Limited Power Supply. The relay contact supports 0.5 A current, DC 24V
- Do not touch the surface of the switch while it is in operation!
Support
At AVCOMM, you can use the online service forms to request the support. The submitted forms are stored in server for AVCOMM team member to assign tasks and monitor the status of your service. Please feel free to write to sales@avcomm.cn if you encounter any problems.
Warranty
5-year Global warranty are available for AVCOMM products assuring our customers that the products shall remain free from defects in workmanship or materials and conform in all material respects to AVCOMM specifications, or purchasers supplied and accepted specifications. The warranty is limited to the repair and/or replacement, at AVCOMM sole discretion, of the defective product during its warranty period. The customer must obtain a Return Merchandise Authorization (RMA) approval code prior to returning the defective Product to AVCOMM for service. The customer agrees to prepay shipping charges, to use the original shipping package or equivalent, and to ensure the product or assume the risk of loss or damage in transit. repaired or replaced products are warranted for ninety (90) days from the date of repair or replacement, or for the remainder of the original product’s warranty period, whichever is longer.
Disclaimer
AVCOMM reserves the right to make changes to this QIG or to the product
hardware at any time without notice. It is the user’s responsibility to
determine whether there have been any such updates or amendments herein.
Defects, malfunctions, or failures of the warranted Product(s) caused by
damage resulting from unforeseeable incidents (such as lightings, floods,
fire, etc.), environmental and atmospheric disturbances, other external forces
such as power line disturbances and surge, host computer malfunction and
virus, incorrect power input, or incorrect cabling, incorrect grounding and
damages caused by misuse, abuse and unauthorized alteration or repair are not
warranted.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>