Techphardo DE100 Industrial Endoscope User Manual
- June 15, 2024
- Techphardo
Table of Contents
Industrial Endoscope
DE 100
User Manual
Product Button Description
| Power Button
Hold this button for 2s to power on/off the endoscope
---|---
| Click to rotate the image 180°
| Click to dim the Camera LED Lightness.
| Click to brighten the Camera LED Lightness
| Click to Zoom out
| Click to Zoom in
| Click to adjust to black and white mode. Hold this button for 2s to mirror
image.
| Red Indicator on: Charging Status
Red indicator off: Charging finished
Blue Indicator on: Working Status
Charging and Reset
Accessory Installation method:
| Turn counterclockwise-remove protect cap | Turn clockwise-tighten accessories |
|---|---|
UI Introduction
FAQ
1. The product does not output a picture and the screen turns blue
Adjust the flexible conduit joint, or restart the device.
2. Lags happened during the photo outputting of the product
Please check whether the product has sufficient power or restart the device.
3. Product crash
Please press the reset button with a pin on the side of the device to power off the device, and then press the power button to turn it on.
4. Imaging screen is not clear
The best imaging focal length of the product is: 4cm-10cm, please calibrate the distance to the object, or clean the front of the camera with a clean alcohol cloth.
5. Product charging
Please use 5V--2A charger to charge the device. The product does not support fast charging.
6. The camera is heat
It is normal for the camera to heat up, especially when the camera LED light is on at the highest brightness. But it does not affect normal use or service life.
Operating and Storage Environments
- The device should be operated at an ambient temperature of 32~113 F (0~45 C).
- The device should be stored in a dry, clean, oil-free and waterless place without any chemical liquid.
Contact us for help
eyatech1@gmail.com