Classy Caps SLK807 Solar Top Post Cap Instructions

Classy Caps SLK807 Solar Top Post Cap

Product Information

The Classy Caps Mfg. Inc. Mod. SLK807 is a solar-powered post cap that comes with a pre-assembled 3.5×3.5 (4×4 nominal) base adapter to accommodate the size of your post. The product is manufactured in Kingsville, Ontario, Canada, and comes with a warranty. The product has four LED lights that can be removed for battery replacement, which is recommended after approximately 2-3 years of usage. The light fixture can be periodically cleaned with a soft cloth and warm soapy water.

Product Usage Instructions

1. Carefully remove the 4 LED’s from the base using a small straight edge screwdriver – feeding the LED wires through the base not to pull the wire out of the battery compartment.
2. Feed the LED’s/wire through the base for your size post and twist the base clockwise to secure it.
3. To replace the battery, carefully remove the 2 screw cover plugs from the base adapter and remove mounting.
4. Periodically clean the light fixture with a soft cloth and warm soapy water.

How Your Solar Powered Post Cap Works

• The solar panel converts sunlight energy into electricity during the day. The photocell automatically turns the light on at night with the electricity stored in the batteries. It requires no wiring, because it runs off the sunlight energy to recharge the batteries so there is no cost to operate the solar fixture.
• The number of hours the light stays on depends on your geographical location, weather conditions and seasonal sunlight availability.
• Easy do it yourself installation.

Includes:

• 1 – Solar Post Cap Light
• 1 – 3.2V Rechargeable Battery
• 4 – Base Adaptors
• 2 – Stainless Steel Mounting Screws & Covers

Post Cap Installation

1. The 3.5”x3.5” (4×4 nominal) base adaptor has been pre-assembled to the solar top for you as shown Please take note of the LED assembly for base installation of your size post. See Base Assembly below.
2. Install the included battery. Make sure polarity is correct
3. Turn the auto-off switch to auto
4. Secure to post using the two mounting screws provided. Push the 2 screw covers into place.
5. Allow 3-5 days of sunlight to fully charge the battery

To Replace The Battery

(Battery replacement is approximately 2-3 years)

1. Carefully remove the 2 screw cover plugs from the base adaptor and remove mounting screws to access the battery compartment
2. Replace the battery with a new 3.2V rechargeable battery of equal capacity. Make sure polarity is correct
3. Allow 3-5 days of sunlight to fully charge the battery

Troubleshooting

If the light does not turn on at dusk after 24 hours of charging:

• Check the battery to make sure it is making secure contact with the terminal.
• Be sure the solar panel is in a relatively sunny location.
• Make sure the solar panel is not affected by other light.

Maintenance

Periodically clean light fixture with soft cloth and warm soapy water.

One Year Limited Warranty

This product is warranted to be free from defects in workmanship or materials at the time of purchase for one year, (excluding batteries). Should a defect occur, please contact our customer service line at 1-866-460-4604 for service. Should any evidence of defects in material or workmanship appear within the warranty period after the date of purchase, Classy Caps Mfg. Inc. will either repair or replace the product at its option. Classy Caps Mfg. Inc. is not responsible for injury, property damage, or other consequential damages or damages to third parties arising directly or indirectly from an actual or alleged defect in material or workmanship of the product.

Classy Caps Mfg. Inc. Harrow, Ontario, Canada www.classycaps.com

References

• Classy Caps : solar outdoor lighting including solar post caps.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>