ENDORFY EY5A120 Thock Wireless Mechanical Gaming Keyboard Instruction Manual

June 15, 2024
ENDORFY

ENDORFY EY5A120 Thock Wireless Mechanical Gaming Keyboard Instruction

Manual

OVERVIEW

LED INDICATOR

Dimension

Connection

WIRELESS

OFF

SOFTWARE

INSTALLATION INSTRUCTION

LEFT LED: CAPS LOCK


RIGHT LED:
BATTERY SUPPLY (ONLY IN WIRELESS MODE)

BATTERY CHARGE INDICATOR (WIRELESS MODE WITH THE CABLE CONNECTED)

BATTERY CHARGING (WIRED MODE, ACTIVE WHEN THE KEYBOARD IS OFF)

WIRELESS MODE (Bluetooth & 2.4G)

Selecting Bluetooth 1 device

  • Pairing Bluetooth I device: The [Z] key turns white and starts blinking. After successful pairing, the [Z] key will once again turn the same colour as the keyboard backlight from before pairing.
  • After failed pairing, the pairing mode will be switched off after 180 seconds.
    • The [Z] key will once again turn the same colour as the keyboard backlight from before pairing.

Selecting Bluetooth 2 device

  • Pairing Bluetooth 2 device: The [X] key turns white and starts blinking. After successful pairing, the [X] key will once again turn the same colour as the keyboard backlight from before pairing.
  • After failed pairing, the pairing mode will be switched off after 180 seconds.
    • The [X] key will once again turn the same colour as the keyboard backlight from before pairing.

Selecting Bluetooth 3 device

  • Pairing Bluetooth 3 device: The [C] key turns white and starts blinking. After successful pairing, the [C] key will once again turn the same colour as the keyboard backlight from before pairing.
  • After failed pairing, the pairing mode will be switched off after 180 seconds.
  • The [C] key will once again turn the same colour as the keyboard backlight from before pairing.
  • Connection in the 2.4G mode (USB receiver)
  • After the first pairing, during the following connection, the [Z], [X] or [C] key (depending on the selected device: BTI, BT2 or BT3) will be backlit in white. After successful pairing, the [Z], [X] or [C] key (depending on the selected device: BTI, BT2 or BT3) will turn the same colour as the keyboard backlight. If the keyboard cannot be paired with the selected device within 180 s, the pairing mode will be disabled. Then, the [Z], [X] or [C] key (depending on the selected device: BTI, BT2 or BT3) will turn the same colour as the keyboard backlight.
  • In the wireless mode (Bluetooth and 2.4G), if the keyboard is not used for 5 minutes, the device will enter the first level of the sleep mode, and LED backlight will be disabled. Press any button to switch the LED backlight of the keyboard back on after the device has entered the first level of sleep mode.
        • In the wireless mode (Bluetooth and 2.4G), if the keyboard is not used for 30 minutes, the device will enter the second level of the sleep mode, and LED backlight will be disabled along with Bluetooth communication. Then, press any button to switch the LED backlight of the keyboard and Bluetooth communication back on after the device has entered the second level of sleep mode.
SOFTWARE/MULTIMEDIA KEYS

ARROW KEYS SWAP

LED BACKLIGHT EFFECTS

  • LED on/off

  • Modify LED backlight change speed

  • Effect direction

  • Backlight colour change

  • Modify backlight mode

  • Increase brightness

  • Reduce brightness

CREATING A CUSTOM BACKLIT MODE
  1. Press [FN] (key with the ENDORFY logo) + [Left Shift] to enter the user
  2. Press [FN] + [Left Shift] for 3 seconds to define the backlight The LED indicator will start to blink. any button to define the backlight colour — press the selected key to switch between the available colours. Repeat colour selection for all the buttons to backlit.
  3. Press tFN] + [Left Shift] for 3 secnnds to save the user mc&.

FACTORY RESET

  • Press [FN] + (key with the ENDORFY logo) + [Esc] for 3 seconds to restore user settings
ALTERNATIVE KEY FUNCTIONS

Safety instruction

  1. 1. Use the product only as intended
  2. Make sure that the product is in good working order before using it.

  3. This device is intended for indoor use, under normal humidity conditions. Do not use it outdoors.

  4. Do not install and use the device within reach of children

  5. Before connecting the device, wait until it heats up to the ambient temperature to prevent damage due to condensation.

  6. Only use a clean, dry cloth for cleaning. Do not touch the device with wet hands.

  7. The device does not have any parts that can be repaired by the user. Return the device to the service centre for repair.

  8. The warranty will be voided if you open the enclosure or modify the device

  9. The product should be used as intended. Incorrect use may damage the product and be dangerous to your health.

  10. DO not use the product near liquids or in places where it may be directly exposed to liquids. If the device comes into contact With any liquids,

  11. Immediately disconnect from the power source

    1. The warranty does not cover mechanical damage to the product.
  12. If the device malfunctions, promptly disconnect the power supply and contact the technical support department of Endorfy.

  13. Do not discard electrical and electronic equipment together with other household waste.

    1. The endu ris bliged.to remove unnecessary or faultv electrical equipment to the collection point or the seller. To obtain additional Information, contact thåoca autnorlties or the store where you purchased the product
  14. Do not dismantle the battery on your own or expose it to moisture, fire, high temperatures or liquids.

  15. In case of an electrolyte leak, deformation or discoloration of the battery. do not use or charge the device

    1. Do not let the battery of the device remain discharged for a longer period. Do not replace the battery in the device on your own
  16. Cha the batteries onb using the cable supplied with the device after connecting it to the USB portof the computer. Do not use external power supåyeunits.

  17. Incorrect handling of batteries or failing to observe the rules described above may cause a fire or chemical burns.

    1. The life Of the battery depends on the way it is used
  18. End-of-life batteries should be transferred for disposal according to the applicable local law.

  19. Keep the batteries out Of reach Of children.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals