BUTURE Beta03 Jump Starter User Guide

June 15, 2024
BUTURE

BUTURE Beta03 Jump Starter

BUTURE-Beta03-Jump-Starter-product

JUMP START YOUR CAR

BUTURE-Beta03-Jump-Starter-fig- \(1\)

  1. Insert the jumper cable into the jump starter (c’:20% power).
  2. Connect the clamps to the car battery (red to+, black to-).
  3. Start your car engine.

ABOUT THE FORCE START FUNCTION

If three attempts fail when you correctly connect the clamps to your car, you can use the Force Start Function to enter boost mode.

BUTURE-Beta03-Jump-Starter-fig- \(2\)

3 steps to fix the problem:

  1. Check the clamps connection and the product’s battery is above 20%.
  2. Press the Force Start Button for 3 seconds.
  3. The indicator will be green, and go back to start engine ignition.

Caution: When using this function, auto-detection and safety features will be disabled temporarily.

TROUBLESHOOTING

In any of the following situations, the smart clamp will turn protections on:

BUTURE-Beta03-Jump-Starter-fig- \(3\)

CHARGE OTHER DEVIDES

  1. Plug the cable into any USB outport.
  2. Press the power button.

LED LIGHTING

BUTURE-Beta03-Jump-Starter-fig- \(6\)

IMPORTANT SAFETY WARNING

  1. Store in a cool and well-ventilated place out of reach of children and pets.
  2. Do not place the product in a high-temperature environment for a long time. The operation temperature of this product is -20-60°C. The storage temperature should not exceed 50°C/l22° F.
  3. Only start vehicles with the smart jumper cable supplied by the manufacturer.
  4. Do not use the product if the clamp or cable is damaged.
  5. Do not connect the red and black clamps when the product is outputting.
  6. Do not connect the red and black clamps to the same piece of metal.
  7. Do not disassemble or modify this product.
  8. Do not use detergent to clean this product.
  9. Do not abuse this product and avoid heavy dropping or repeatedly hitting it.
  10. Do not operate the product in explosive environments such as flammable liquids, gases, or dust.
  11. Do not immerse the product in water.
  12. Do not litter the product and it should be safely recycled.
  13. Do not incinerate the product or be exposed to high temperatures, as they may explode.
  14. Only use replacement parts or accessories provided or recommended by the manufacturer.

Scan And Download the Full Version Of the User Manual
https://ibuture.com/pages/user-manuals.

BUTURE-Beta03-Jump-Starter-fig- 7

WHERE TO GET MORE HELP

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

BUTURE User Manuals

Related Manuals