RMA2301 Realme Buds Air 5 User Manual

RMA2301 Realme Buds Air 5 User Manual

Enter pairing mode

Press and hold 3 seconds for pairing.

Connect earphones

• Connect phone of realme
  Turn on the Bluetooth on phone. Open the headset charging box, put it close to the phone, then follow the personalized pop-up instructions on the screen to operate.
  
  

• Connect phone of other brand
  Turn on the Bluetooth on phone. Open the headset charging box, put it close to the phone. Then enter Bluetooth settings of mobile phone, search and connect： realme Buds Air 5
  
  

• Restore factory settings
  Put the headset in the charging box and open the box cover, press and hold the function key for 10 seconds until the indicator light flashes alternately in white and green, the headset then returns to factory settings.

Wear earphones

You can choose the most appropriate ear tips size. (M installed by default)

Touch controls

Touch twice to play or pau se music, an saw or end a call

****Touch three times to skip forward

Touch area
Press and hold 2 seconds on either side to switch noise control modes, decline an incoming call./

realme Link

For more functions, please go to experience in realme Link App

Overview and packing list

Indicator (open cover without charging)
20% The green light stays on for 3s
<20% The red light stays on for 3s

Packing List
Earphone x 1:  Ear tips ( M installed by default) x 6
User Guide x 1:  Type-C charging cable.

Basic Parameters

charging case)
Machine charging time| About 2h
Bluetooth communication distance| &gem
Working frequency| 2402–2480 MHz
Max power rate| < lSdBm

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The SAR limit of USA (FCC) is 1.6 W/kg averaged over gram of tissue. Device types RMA2301 (FCC ID:2AUYFRMA2301-R/FCC ID:2AUYFRMA2301-L) has also been tested against this SAR limit.

Warning

1. Don’t place the product into a liquid environment or avoid the product exposed to high humidity.

2. Avoid extrusion to avert the damage to the product.

3. Don’t attempt to dismantle the product. Put the product in a cool and dry place to keep it dry if
   stored for a long time.

4. Avoid touching the strong magnet to prevent the magnetic headset from being demagnetized.

5. Avoid the dusty, wet and dirty environment where the electronic circuit of the equipment may be
   damaged if being used.

6. Don’t use the equipment at the moment of thunderstorm because the thunderstorm may incur equipment fault or shock hazard.

7. Don’t use the equipment when riding a motorcycle or a bicycle, driving a car or crossing the road ensure your safety.

8. Keep the equipment out of reach of children or pets to avert the damage.

9. Don’t wash the equipment with chemical, cleanser or strong detergent.

Do n’t listen to the voice under high sound p reassure and high volume for a long time to prevent the possible hearing impairment when the headset is used.

This symbol means that ac cording to local law s and regulations your product and/or its battery shall be disposed of separately from household waste. W hen this product reach’s its end of life, user has the choice to give his product to a competent recycling organization. Proper rec ycling of your product will protect human health and the environment.

Battery warning

The built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded or put into �re. The battery under the very low air pressure may result in explosion or �ammable liquid or gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert explosion. Don’t use the battery continuously in case of serious ballooning. The battery shall be handled pursuant to the local regulations and shall not be disposed as household garbage. Don’t try to repair, remove or re�t the battery. An explosion may happen if the battery is replaced by the one subject to incorrect model. Don’t compress or puncture the battery with a hard object. Battery leakage, overheating or outbreak of a �re may occur if the battery is destroyed.

Tips

1.  This product contains a battery. If it is not used for a long time, please store it in the environment of 0°C-35°C, and charge the product at least every 3 months to prevent the battery performance from deteriorating.
2. Please use the earphones or charge it in a normal environment (ambient temperature 0°C-45°C, humidity 45%-85%). The earphones can be charged quickly at 15°C -35°C. If the product temperature is not within the safe temperature range, it may cause damage to the earphones and battery performance.

Warranty

Thank you for purchasing realme products. If any manufacturing defect problems occur within 12 months from the date of purchase, user can enjoy our company’s warranty service.

Matters Needing Attention:

1. When you buy the product, the sales unit will issue a valid proof of purchase.
2. The warranty card and the proof of purchase should be kept by the user properly, and it will not be replaced if lost.
3. If the product fails due to non-human factors, the user can present the warranty card and proof of purchase to the realme customer service center for free maintenance during the warranty period.

Non-warranty situation:

This warranty does not cover the following cases:

1. Out of warranty period.
2. Damage caused by use not in accordance with the instructions.
3. Damage caused by man-made causes.
4. Failure caused by unauthorized disassembly, maintenance, or modi�cation of the product.
5. Damage caused by force majeure factors (such as �oods, earthquakes, lightning, etc.).
6. There is no warranty card, invoice, or warranty card that does not match the invoice information.
7. The product wears naturally.
8. Other failures and damages that are not caused by the quality of the product itself.

W arran ty C a rd (Stub C opy)

Dear user, thank you for using the product of our company. Please read and keep properly the w arran ty ca rd after purchasing the product so that w e can provide better services to you.

User Information User’s name
Phone Number
Address
Email

Product Information
Product Model
Product Serial Number

Sales Information
Purchase Date
Invoice Number
Sales Unit
Phone Number
Address _____

References

• Anatel — Agência Nacional de Telecomunicações
• realme (Global) - Make it real
• Make It Real - realme (Brazil)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>