NEXTTORCH TA01 Single-Mode Tactical Flashlight User Manual
- June 5, 2024
- NEXTTORCH
Table of Contents
NEXTTORCH TA01 Single-Mode Tactical Flashlight`
SPECIFICATIONS
The above-tested specifications are strictly based on the standard of ANSI / PLATO FL1. we tested TA01 with a NEXTORCH standard 18650 (2600 mAh) size battery in 25℃. the specifications might be different when using different batteries or testing in different environments.
FEATURES
- High-intensity CREE® XP-G3 S4 neutral white LED provide a max single-output of 500 lumens;
- Waterproof and impact resistant up to 2 meters;
- Machined aircraft-grade aluminum with non-slip knurled body design;
- Compatible with 1 × 18650 battery or 2 × CR123A batteries;
- Apply to tactical flashlight ring “FR1”.
Battery Replacement
- Powered by 1 × 18650 or 2 × CR123A
Momentary ON
- Press tail cap switch for momentary-on
Constant ON / OFF
- Twist tail cap for constant-on
Lanyard
- Pass through the hole of pocket-clip
MAINTENANCE
- Being infected with seawater or any corrosive chemicals, please rinse immediately with clean water.
- Please use high-quality batteries; Remove batteries when not working for a long time, and then store in a cool dry place.
- Replace waterproof O-ring immediately when considering of the damage with use.
WARRANTY
- NEXTORCH warrants our products to be free from any defects in workmanship and/o materials for a period of 15-day from the date of purchase. We will replace it. NEXTORCH reserves the right to replace an obsolete product with current production, like a model.
- NEXTORCH warrants our products to be free of defect for 5 years of use. We will repair it.
- The warranty excludes other accessories, but rechargeable batteries are warranted for 1yea from the date of purchase.
- In the event that any issue with a NEXTORCH product is not covered under this warranty, NEXTORCH can arrange to have the product repaired for a reasonable fee.
You could access to NEXTORCH website (www.nextorch.com) to gain warranty service information by scanning the following QR code. You could also:
- Email us at service@nextorch.com
- Call us: 0086-400-8300-799
- OR contact your local dealer/distributor
CONTACT WITH NEXTORCH DESIGNER
In order to improve NEXTORCH, we appreciate you could offer our designers your after-us feedback and creative suggestions by scanning the following QR code. Thank you.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>