Teckin TS100 1080P HD Outdoor Security Camera User Manual
- June 6, 2024
- Teckin
Table of Contents
Teckin Cam 1080P HD Outdoor Security Camera
User manual
Model: TS100
In The Box
Look Closer
Customer Service
Find a way to share?
Choose your favorite social media:
If you need help
**** You can get a timly reply here:
Shooterateckinhome.com
“Feedback” in Teckin App
Tag us on social media
More about Teckin
www.teckinhome.com/service
Wall Mount & Ceiling Mount
Mark the location of the two holes in the wall mount plate, drill the holes,
and screw the plate to the wall.
Two sides of the wall mount plate:
Warranty Terms
- 30-day return policy & 2-year limited warranty.
- Timely customer service via Shooter@teckinhome.com
- Lifetime professional tech support provided by Teckin.
Teckin app
Scan QR code to download the “TECKIN” App
|
---|---
IOS
|
Android
How to Set up
- Download the “Teckin” App and create an account.
- Connect the camera to the power source and wait for 15 seconds until the red status light flashes.
- Open the app and Shooter “Add Camera” on the front
- Follow the instructions on the app until you hear the sound prompt.
- If you have any problems connecting please contact customer service and we will reply back to you within 7 hours.
Note: 5GHz network is not supported. 2.4GHz only. Enjoy the Teckin Shooter!
Light Indications
| Solid red light
The device is powered on and initializing.
---|---
| Flashing red light
The device is ready to connect.
| Flashing white light
Connection is in progress.
| Flashing between white and red light
Wi-Fi account or password is wrong, please reconnect.
| Solid white light
The device is working properly.
IC Warning
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
FCC Statement
This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party. Responsible for compliance could void the user’s
authority to operate this equipment. (Example- use only shielded interface
cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC radiation exposure limits set forth for
uncontrolled environments. This equipment should be installed and operated
with a minimum distance of 20cm between the radiator and your body.
Shenzhen Apeman Innovations Technology Co., Ltd.
1808, Heng Lu E Times Building, No.159, North Ping’ Road,
Hehuo Community, Pinghu Street, Longgang District,
Shenzhen, Guangdong, China
www.teckinhome.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>