Dongguan XY-PR016 MagClick 5000 mAh Fast Wireless Power Bank Instruction Manual

: June 15, 2024
: Dongguan

Table of Contents

Dongguan XY-PR016 MagClick 5000 mAh Fast Wireless Power Bank Instruction
FSC 100% Wood MagClick™ 5000 mAh Fast Wireless Power Bank Instruction
Functions:
What’s included:
Instructions:
1. Charging the Powerbank:
2. Charging Mobile Phones and Other Electronic Devices:

Dongguan XY-PR016 MagClick 5000 mAh Fast Wireless Power Bank Instruction

Manual

FSC 100% Wood MagClick™ 5000 mAh Fast Wireless Power Bank Instruction

Manual Item: 7122-06 Model: XY-PR016

Functions:

Wireless Charging Surface
Magnetic Surface
ON/OFF Button
LED Display
Type-C Input/Output
LED Indicator
USB-A Output

What’s included:

1 x Wireless Charging Pad 1 x Instruction Manual
1 x USB-A to Type-C Charging Cable

Battery Capacity: 5000mAh/18.5Wh
Type-C input: 5V/2.4A ;9V/2A; 12V/1.5A
Type-C output: 5V/2.4A ;9V/2A; 12V/1.5A
USB-A output: 5V/2.4A ;9V/2A; 12V/1.5A
Wireless output: 10W/7.5W/5W

Instructions:

1. Charging the Powerbank:

Be sure the power bank is fully charged before
Using the included Type-C to USB charging cable, insert the USB A port of the cable into a computer and Type-C into Type-C Input/ Output port (5).
Once connected, the LED display(4) will show the percentage of remaining power and when fully charged the LED display will show “100%”.

2. Charging Mobile Phones and Other Electronic Devices:

Connect the charging cable to your mobile phone/device using the appropriate Connect the USB tip of the cable into USB A Output(7) or Type-C tip into Type-C input(5).
Phone will begin to charge automatically, the LED display will show the percentage of remaining power in the power bank.
Remove the charging cable from your mobile device when it is fully charged.

3. Wireless Charging Mobile phones and other electronic devices:

Press the ON/OFF button(3) once to turn on the wireless charger function, the LED dis- play(4) will show the remaining power. LED Indicator(6) turn RED when in standby
Place the wireless charging supportedmobile device on the wireless charging surface, it will begin to charge automati- cally and the LED Indicator will glow RED when device is charging.
Once fully charged remove the
Double press the button to turn off the wireless

** Note: When wireless charging, if the LED

NOT a wireless charging device or there is an object between the the device and charging surface interfering with the charging process.

4. Wireless Charging with Magnetic

Surface:

If your device supports MagSafe, the magnets in your iPhone will connect to the magnetic surface(2) of the pad for a more secure
This item is also compatible with other items, the magnetic function just won’t work.

SAFETY PRECAUTIONS:

WARNING-When using this product, basic precautions should always be followed, including the following:

Read all the instructions before using the
Charge the power bank fully before initial The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.
To reduce the risk of injury, close supervision is necessary when the product is used near children.
Do not expose the device to
Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or
Do not use the device if damaged or
Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not disassemble the device.Take it to a qualified service person when service or repair is Incorrect reassembly may result in a risk of fire or injury.
Do not expose the device to fire or excessive Exposure to fire or temperatures above 212Fmay cause explosion.
Have servicing performed by a qualified repair person using only identical replacement
This will ensure that the safety of the product is maintained.
Do not overcharge Phone.Unit may get hot with excessive use.Remove Phone when it is fully Never charge for more than7 hours at a time.
Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to Please remove attachments from the phone before charging on this device.

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.* Warning:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to whitch the receiver is
Consult the dealer or an experienced radio/TV technician for help.

IC Statement

This device contains licence-exempt transmitter (s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause
This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
Radio Frequency Exposure Statement for IC This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 10cm between the radiator & body.
Cet équipement est conforme aux limites d’exposition IC définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 10cm entre le radiateur et la carrosserie.
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.
(Cet appareil numérique de la Classe B conforme à la norme NMB-003 du Canada).
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.